







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Driveway & Pavers: The Los Angeles Owner’s Guide
We install ActiveYards-compatible paver driveways and hardscape in Los Angeles, and a full paver driveway typically runs $8,260 to $21,240 installed. Pavers and the base under them aren’t a single swap-in part the way a gate hinge is, so most jobs are scheduled work rather than a same-day drop-in. Owners usually find out something is wrong the same way: a paver rocks under the tire, a joint line wanders, or a low corner holds water after the first real rain and stays wet for days.
Key Takeaways
- Installed paver driveway pricing in Los Angeles: $8,260 – $21,240, driven mostly by square footage and base prep.
- The paver itself almost never fails first. The base, the edge restraint, and the joint sand do.
- We’re an independent contractor. We’re not affiliated with ActiveYards, and we don’t claim to stock their parts.
- Every price is written before work starts, and the work carries the 365-Day Done Right Promise.
Which ActiveYards Models This Applies To

ActiveYards sells through dealer and distributor networks, and the paver profiles change name and dimension by region and by year. That matters when you’re matching a replacement. A paver you pull from a big-box pallet may look close to yours and still be off by 3/8 inch in thickness or a few degrees in the chamfer, which shows up as a lip at every joint once it’s set. The reliable path is to pull one intact paver from an undisturbed edge, measure length, width, thickness in millimeters, and photograph the face texture and color name if it’s stamped or printed on the wrapper or a leftover carton.
On the OEM-versus-aftermarket question: for a driveway, aftermarket is usually the right call. The pavers aren’t the proprietary part. The base specification, the bedding layer, and the edge restraint are what make the system hold, and those are standard hardscape materials any experienced installer works with daily. If you’re trying to match a discontinued ActiveYards color for a small repair, a close-profile paver from a documented line such as Belgard is often the honest answer, and we’ll tell you plainly when a perfect color match isn’t available rather than sell you a mismatch.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ActiveYards Driveway & Pavers Is Failing
- Pavers rocking or dipping under a tire. The bedding layer under that unit has washed out or consolidated. Once one paver moves, the ones beside it start losing joint sand and follow.
- Joint sand washing out after rain. Usually a drainage or slope problem, not a sand problem. If water is running across the drive instead of off it, new sand will wash out again within a season.
- A wandering joint line or spread edges. The edge restraint has shifted or was never set deep enough. Without a fixed edge, the field pavers creep outward and the whole pattern opens up.
- Standing water in a low corner. The subgrade has settled or the original slope was set too flat. This one gets worse every wet season and can push water toward the foundation.
- Ruts in the wheel path. In Los Angeles this often traces to base thickness, not the pavers. A drive built over an under-compacted base will rut no matter what surface sits on top.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the work runs in Los Angeles, with the number you actually need up front.
| Scope | Installed Price Range |
|---|---|
| Paver driveway installation (full) | $8,260 – $21,240 |
| Driveway replacement | $5,900 – $16,520 |
| Driveway sealing | $295 – $825 |
| Paver patio installation (for comparison) | $4,130 – $12,980 |
What moves the range: square footage first, then how much base has to come out and be rebuilt, whether the edge restraint is being replaced, and whether drainage has to be corrected. A repair that resets a section of pavers costs far less than a full rebuild because the base work is smaller. Sealing is maintenance, not a fix, and won’t correct a rocking paver or a bad slope. Parts-plus-labor is quoted as one written line-item price before any work begins, and the finished work is covered by the 365-Day Done Right Promise: if it fails inside that year, we come back and correct it at no charge.
DIY or Call Us?
You can safely pull one loose paver to measure it, photograph the joint and edge condition, and note where water pools. That’s useful information and it costs nothing. Where DIY goes wrong on a driveway is the base. Homeowners routinely reset pavers on a thin layer of sand over an uncompacted subgrade, and the drive looks right for one dry season and then ruts. Edge restraint is the other common miss; without it properly set and spiked, the field spreads. And a driveway is a load-bearing surface, so the consequences of a bad base aren’t cosmetic. If the pavers are rocking, the joints are washing, or water is pooling, that’s a base or drainage problem, and it’s the point to get a professional eyes on it. Call (844) 343-6681 and we’ll give you a written price before anything starts.
FAQs

The pavers themselves commonly last decades; the base and joint sand are what fail first, often within 5 to 15 years depending on how the drive was built and how much water it takes. Los Angeles’s dry summers and concentrated winter rain are hard on joint sand specifically. Call (844) 343-6681 for an exact quote – estimates are free.
Sometimes yes. If the problem is isolated to a section, resetting those pavers and rebuilding the base under them is a real option and much cheaper than a full drive. If the slope or the whole base is failing, a repair just moves the problem. Call (844) 343-6681 and we’ll tell you which one you’re looking at.
A section repair is often a day or two. A full paver driveway in Los Angeles usually runs several days to over a week depending on square footage, base removal, and drainage correction. You’ll have a written schedule before we start. Call (844) 343-6681 for an exact quote – estimates are free.
We work with a documented roster of name-brand hardscape lines, including Belgard and Unilock, and we source ActiveYards-compatible material through dealer and distributor channels. We don’t claim to stock ActiveYards parts and we’ll tell you honestly when an exact color match isn’t available. Call (844) 343-6681 for an exact quote – estimates are free.
We also install and service KraftMaid cabinetry, Cambria and Silestone surfaces, and the rest of our documented brand roster when your project moves indoors. If your ActiveYards driveway in Los Angeles is rocking, washing out, or holding water, call (844) 343-6681 for a free estimate. A live person answers, day or night, and you’ll get a written price before a single tool comes out.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












