A Bradford company - serving Los Angeles, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
Techo-Bloc · Los Angeles

Techo-Bloc Bathroom Remodeling in Los Angeles, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Los Angeles
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A low-threshold walk-in shower with a bench and grab bar
A powder room with botanical wallpaper and a stone sink
A wood double vanity with two mirrors after a bathroom remodel
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Techo-Bloc Bathroom Remodeling: The Los Angeles Owner’s Guide

Bathroom remodeling with Techo-Bloc materials in Los Angeles typically runs $10,620 to $33,040 installed, and smaller bathrooms land in the $5,900 to $14,160 range. That price covers demolition, substrate prep, waterproofing, tile and stone setting, fixture rough-in, and finish work, quoted in writing before anything gets pulled out. If you already own Techo-Bloc product and a component has failed, the fix usually costs a fraction of the full remodel because the stone and tile stay put.

Call (844) 343-6681

We’re an independent contractor, not affiliated with Techo-Bloc. We install and service their products, and we know where they fail.

How Los Angeles Owners Usually Find This Problem

Most people don’t call us because they were shopping for a bathroom. They call because a shower niche started weeping, a stone threshold rocked loose, or grout over a Techo-Bloc wall block cracked in a straight line. Sometimes it’s the opposite: a bathroom bench or half-wall built from Techo-Bloc units that held up beautifully for years until the waterproofing behind it gave out.

Los Angeles homes sit on something most of the country doesn’t deal with. Expansive clay soils in the flats, hillside movement in the canyons, and a long dry season followed by a concentrated rainy stretch. That cycle, repeated over a decade, loosens set materials and stresses every seam in a wet room. A small crack in 2024 is a leak into the framing by 2026.

We hear the same stories. Grout cracking along the floor line. A shower pan that stays damp for days. A bench that flexes when you step on it. Nobody wants to hear “tear it all out” and nobody should have to, which is why diagnosis comes before demolition.

Key Takeaways

  • Bathroom remodel with Techo-Bloc in Los Angeles: $10,620 – $33,040 installed; small bath $5,900 – $14,160.
  • Walk-in shower installation runs $5,310 – $14,160; a simpler shower replacement is $3,540 – $10,030.
  • A written price is issued before work starts, and the finished job carries a full-year written guarantee.
  • Fixes are quoted as line items: demolition, prep, waterproofing, setting, finish.
  • Live person answers the phone, day or night.

Which Techo-Bloc Models This Applies To

A tile setter installing wall tile in a shower

Techo-Bloc’s bathroom-relevant lines aren’t one product. They’re a family of hardscape and architectural stone pieces used inside wet rooms and bath-adjacent spaces. The compatibility question is not “which Techo-Bloc part fits my Techo-Bloc bathroom,” it’s “which Techo-Bloc piece matches the one already in my wall, floor, or bench.”

Here’s what trips people up. Techo-Bloc face blocks, wall units, and modular stone pieces are produced in plant runs, and a shade or dimension variation between production years is normal, not a defect. Two blocks cut from different lots can differ by a few millimeters in depth and read as a slightly different slate tone. Most homeowners discover this after ordering a replacement unit that “matches” on the spec sheet and clashes in the room.

Identification comes down to measurement and labels:

  • Measure the actual unit – length, width, depth, in millimeters. Spec sheets list nominal dimensions; a used block in a wet room measures true.
  • Check for a stamp – many Techo-Bloc pieces carry a manufacturer mark on the face or back edge. Photograph it before cleaning or resetting.
  • Note the series – face and finish are the fastest identifier. A split-face finish and a tumbled finish on the same nominal block are different product lines.
  • Measure the course and joint – if the surrounding joints are 6mm, a replacement that wants a 10mm joint will not sit flush.

OEM vs. aftermarket for Techo-Bloc specifically: aftermarket stone is common and, done right, indistinguishable. The catch is that aftermarket units rarely match Techo-Bloc’s exact tone, and one mismatched block in a visible plane reads as a patch job. If the piece is in a hidden return or under a bench, aftermarket works. If it’s the visible face of a shower wall, order the closest Techo-Bloc production match you can. We source both and tell you which one is worth the wait.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Techo-Bloc Bathroom Remodeling Is Failing

Five symptoms we see repeatedly in Los Angeles bathrooms built with Techo-Bloc stone and tile:

  • Straight-line grout cracks along a floor or wall seam. Grout in a rigid straight line usually means the substrate under it moved, not that the grout was bad. Once the seam opens, water gets behind the setting bed.
  • A shower bench or half-wall that flexes under foot. Stone benches built on a wood or thin-block core loosen over time. Flex means the bond between the stone and its support has already failed. That’s a leak path, not a cosmetic issue.
  • A shower pan that stays wet for more than a day. Water pooling at the perimeter, or a drain that never fully dries, points to a failed slope, a blocked weep, or waterproofing that has been breached. Grout and stone don’t cause this; what’s under them does.
  • Efflorescence – white mineral crust – on stone faces. Crusting stone is moisture escaping from behind. It’s the stone doing its job; something else is leaking.
  • A stone threshold or curb that rocks or lifts. A rocking curb means the setting material failed and the waterproofing membrane below it is now suspect. This is the one to fix first.

None of these get better with sealant. Sealant hides the symptom and traps the moisture. The fix is always under the surface.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

New painted shaker cabinets with an organized deep drawer

For a Los Angeles bathroom with Techo-Bloc stone in a shower, bench, or wall, the following installed ranges reflect what we quote and what we stand behind.

Scope Installed range (Los Angeles)
Full bathroom remodel (Techo-Bloc stone and tile) $10,620 – $33,040
Small bathroom remodel $5,900 – $14,160
Walk-in shower installation $5,310 – $14,160
Shower replacement $3,540 – $10,030
Tub-to-shower conversion $4,130 – $11,800
Bathroom vanity installation $945 – $3,540

What drives the range: the condition of the substrate under the existing stone, whether waterproofing needs full replacement or spot repair, how much demo is required, the specific stone piece or production match, and access. A second-floor bathroom in a hillside home with a long tile run to the door is more work than a ground-floor bath off a hallway. We tell you which of those applies before we quote, not after.

What’s included in every written price: demolition and haul-off, substrate repair, waterproofing, setting materials, stone and tile work per the line-item scope, fixture reset or replacement per scope, cleanup, and the signed written guarantee in your hand at close. Nothing moves at the door. No change orders on pre-quoted scope. Every completed project is covered by the 365-Day Done Right Promise – if the work fails inside twelve months, we come back and correct it at no charge.

We work from a documented brand roster so the specification is traceable. On the bathroom side, that includes Kohler and Moen fixtures, and when a bath remodel extends into storage or vanity joinery we draw on KraftMaid, Wellborn, Cambria, and Silestone, each with manufacturer specs and warranties that back our own guarantee.

DIY or Call Us?

Some things you can safely check yourself. Some things you should not touch.

What’s safe to check: photograph the loose stone or cracked seam, measure the block, note the finish, and check whether the issue is visual or wet. A soft thump under the floor tile, a shower pan that pools water, or efflorescence on a stone face – those are signs. Write down what you find. That’s useful information for the diagnosis.

Where DIY goes wrong: re-setting stone in a wet room is not a caulk-and-clamp job. Once the stone has lifted or a bench has flexed, the waterproofing membrane behind it is presumed breached until tested. Any repair that skims the surface – sealant, thin-set over grout, a new layer of stone over the old – traps moisture in the wall and framing. Bathroom leaks are the leading hidden cause of framing rot we find in Los Angeles homes that had a “repaired” shower. It’s a job for a trained setter who can open the substrate, confirm waterproofing, and put it back with a documented scope. You can’t inspect a wall you didn’t open.

If you’ve got a lifted curb, a flexing bench, or a pan that won’t dry, that’s a call, not a weekend. Call (844) 343-6681 and we’ll send a technician out to diagnose, photograph, and quote the fix in writing. No pressure to decide on the spot; the price is the price whether you say yes today or next week.

FAQs

A remodeled staircase with wood treads and a slim metal railing

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled living room with built-in shelves around the fireplaceA single-story rear room addition with tall windows and a new patioAn open kitchen and dining area after a remodelA whole-home remodel with the living, dining and kitchen areas opened upA remodeled primary suite with built-in wardrobes and a window seatA garage converted into a guest room and home office

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Los Angeles

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Los Angeles team

A local vetted partner works across Los Angeles and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 343-6681
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Bradford Remodeling Co Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch