







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Driveway & Pavers: The Los Angeles Owner’s Guide
We install and repair Unilock driveways and paver systems across Los Angeles, and most full paver driveway installations run $8,260 to $21,240 installed, depending on square footage, base depth, and border detail. Most owners find out something is wrong the same way: a paver rocks underfoot near the garage apron, sand washes out of the joints after the first winter rain, or a settled dip holds water in front of the walk. In Los Angeles, that dip usually shows up fast because our clay-heavy soils and dry-then-soaked rain pattern stress a base that wasn’t compacted to spec. We work with Unilock products as an independent contractor and are not affiliated with Unilock.
Key Takeaways
- Unilock driveway and paver repair in Los Angeles is a base-and-joint problem more often than a paver problem.
- Full installs run $8,260 – $21,240; targeted repairs run far less.
- California sun and clay soil drive specific failure patterns covered below.
Which Unilock Models This Applies To

Unilock makes structural pavers in several families. On Los Angeles driveways you’ll most often see Brussels Block and Brussels Dimensional Stone in the tumbled, driveway-rated line, Beacon Hill for its smooth flagstone look, Courtstone for a cobble profile, Elegance for a larger slab aesthetic, and Umbriano or Treasure Island on the patio side of the property. Driveway-rated pavers must carry the right compressive strength for vehicle loads; Brussells and Courtstone are engineered for that, while thin veneer-style products are not.
To identify what you have, pull one paver from a corner or a spot behind the garage. Unilock stamps most of its pavers on the underside or side face, and the color name is printed on the pallet wrap when a contractor leaves it behind. Measure the face (for example, a 60 mm or 80 mm thickness tells you whether it’s driveway-rated) and photograph it top and bottom before you call anyone. That one photo is the fastest way to match a replacement.
OEM Unilock match is usually the right call here, because color lots shift over years and a mismatched replacement stands out badly on a front driveway. Aftermarket lookalikes save money but rarely match the layer thickness or the exact color blend. We source through documented Unilock product lines so the specification is traceable.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Driveway & Pavers Is Failing
This isn’t a part that breaks in one spot. It fails in patterns, and the pattern tells us the cause:
- Paver rocking or “wobbly” underfoot, especially near the garage apron. The bedding sand has migrated or the base has settled. In Los Angeles, this is often where a driveway meets the home’s foundation and water has been entering the joint.
- Sand washing out of joints after a rain. A sign that the joint sand was not polymeric, was under-filled, or the pitch of the driveway drains toward the house instead of away.
- A dip or puddle that holds water for hours. The base course was not compacted in lifts, or the subgrade was never proofrolled. Our clay soils are notorious for this and get worse with our wet-then-dry winters.
- Efflorescence (white chalky haze) that comes back after cleaning. Trapped moisture under the pavers is migrating up through the surface. Sometimes it’s mineral in the water; sometimes it’s a drainage issue underneath.
- Shifted edge or missing edge restraint. The paver edge restraint has cracked or separated from the base. Without restraint, the field pavers creep and the driveway loses its line.
In Los Angeles neighborhoods like Sherman Oaks, Encino, and the hillside streets off Mulholland, we regularly see spring failures driven by clay soil swelling during the wet season and shrinking back in summer. Pavers set with undersized base on those lots move first.
Replacement Cost & What’s Included

Here’s the honest installed pricing for Los Angeles, with the range explained:
| Scope | Los Angeles Range |
|---|---|
| Full Unilock paver driveway installation | $8,260 – $21,240 |
| Paver driveway replacement (tear-out + reinstall) | $5,900 – $16,520 |
| Paver patio installation | $4,130 – $12,980 |
The range is driven by three things: square footage, base depth (in Los Angeles on clay soil, we go deeper and compact in lifts), and whether edge restraint and polymeric joint sand are included. A targeted repair – lifting and re-setting a settled section, re-sanding joints, replacing a broken edge restraint – is a piece of the whole and priced accordingly, quoted line-item before any work starts.
Every completed job carries our 365-Day Done Right Promise: a full-year written guarantee, and if the work fails inside that window we come back and correct it at no charge. You get a written price before we lift a paver, and it doesn’t move at the door.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself: photograph the paver from top and bottom, note where the puddles sit after a rain, see whether the edge restraint is visibly cracked, and measure the thickness of any loose paver. What we don’t recommend is trying to lift and reset a whole driveway section or “fix” a base on your own. The work that actually fixes a failing driveway is compaction, correct base depth, and proper drainage pitch – all of which need equipment and soil knowledge. A DIY patching effort on a clay lot in Los Angeles usually looks fine for one wet season and then moves again.
If you’ve already tried patching and it didn’t hold, that’s the point to call. Ring (844) 343-6681 for a written, line-item estimate and a straight answer on whether it’s a repair or a replacement.
FAQs

Twenty-five to fifty years is realistic for a well-installed Unilock paver driveway, and the pavers themselves often outlast the driveway. The failure you see is almost always in the base or the joints, not the paver. Our California sun and clay soil are hard on the base, so the install spec determines lifespan more than the brand. Call (844) 343-6681 for an assessment of what your driveway actually needs.
Yes, often. If the failure is localized – a settled section, a broken edge restraint, washed joints – we can lift, re-base, and re-set that section and re-sand. If the base is failing across the whole driveway, replacement is the honest answer and we’ll tell you so before any work starts. Estimates are free.
A typical two-car driveway takes roughly 3 to 5 working days from demo to final joint sand, depending on square footage and base depth. A targeted repair on a single section is usually a one-day job. We’ll give you the timeline in writing with the price.
We source through documented Unilock product lines, matched by the model and color lot photographed from your existing pavers. Whether we’re working with Unilock pavers, or coordinating KraftMaid, Cambria, or Silestone on the interior side of a whole-home remodel, our spec is traceable and confirmed in writing before the material order is placed. Call (844) 343-6681 for a free estimate.
Get a Written Estimate
Call (844) 343-6681 to schedule your free estimate on your Unilock driveway or paver project in Los Angeles. A live person answers the phone, day or night. You’ll get a written price before any work starts, background-checked and uniformed technicians on the job, and the 365-Day Done Right Promise on every completed project.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












