







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Fence Installation: The Los Angeles Owner’s Guide
Unilock fence installation in Los Angeles typically runs $4,130 to $10,620 installed, depending on wall or column length, footing depth, and whether you’re repairing a failed section or building new. Most jobs we quote are scheduled within the week, not months out. We install Unilock-compatible systems for owners across Los Angeles, and we give you the written price before any work starts.
Owners usually find the problem the same way. A fence line that used to stand plumb starts leaning after a wet winter, or a cap stone works loose and you can see the adhesive line underneath. Sometimes it’s the base course: a column that’s been kicked loose at the footing and rocks when you push on it. If you’re here, you’ve probably already noticed one of those and want to know whether it’s a fix or a full rebuild.
Key Takeaways
- Installed Unilock fence and wall work in Los Angeles: $4,130 – $10,620.
- Footing depth and soil conditions drive most of the cost variance, not the block itself.
- Written price before work starts, backed by the 365-Day Done Right Promise.
- Live person answers the phone 24/7 at (844) 343-6681.
Which Unilock Models This Applies To

Unilock makes several wall and fence-block systems, and the compatibility question matters more than most homeowners expect. The Brussels Dimensional Stone wall line, the U-Cara system with its proprietary panel and clip hardware, and the Il Campo and Olde Cottage lines all use different unit depths and different coping options. U-Cara in particular is a system, not just a block – the panels, the clips, and the corner pieces are matched. If you’re trying to replace a single damaged unit or column, we need to confirm the exact product line, the coursing height, and whether the wall is a gravity wall or a segmental retaining wall with geogrid.
Here’s how to identify what you have. Look at the cap and the face of the block. Measured coursing height is the fastest tell: standard Unilock wall units run in specific nominal heights, and if your courses don’t match that increment, you may have a discontinued line or a different manufacturer’s product. Check the underside of a loose cap for a casting or mold mark. Measure the actual unit depth front to back – a 12-inch-deep unit and a 6-inch-deep unit are built for very different lateral loads.
On the OEM-versus-equivalent question: Unilock’s matching pieces are the safest bet for color and dimension continuity, especially on visible faces. Where an exact unit is discontinued, a quality compatible unit in the same nominal size can work structurally, but you’ll likely see a color or texture variation. We tell you that upfront rather than after the fact. Bradford Remodeling Co Los Angeles is an independent service provider, not affiliated with Unilock, so we source matching material rather than representing the manufacturer.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Fence Installation Is Failing
These are the five failures we see most in Los Angeles, and what’s actually causing each one.
- A section leaning out of plumb. That’s usually a footing or base-course problem, not the block. In Los Angeles, expansive clay soils in areas like the San Fernando Valley swell and shrink with seasonal moisture, and a shallow footing gets pushed before the wall does.
- Loose or missing cap stones. Adhesive failure from thermal cycling – hot days, cool nights, year after year. Once the cap lifts, water gets behind it and the freeze-thaw cycle of a cold snap widens the gap.
- Column that rocks when pushed. A footing that was poured too shallow or without proper compaction. Left alone, the column continues to tilt and can eventually separate from the fence line.
- Efflorescence or white staining on the face. Mineral salts migrating out as moisture moves through the block. Sometimes cosmetic; sometimes it signals water is getting in where it shouldn’t.
- Cracks along a mortar joint or at a corner. Movement at the joint, often from settlement or from a wall built without proper drainage behind it. Los Angeles clay holds water, and a wall without weep points traps it.
Each one has a different fix, and treating a footing problem as a cosmetic one wastes money. We diagnose before we quote.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed Unilock fence and wall work in Los Angeles runs $4,130 to $10,620. The range is wide because the job varies that much. Here’s what actually moves the number.
- Linear feet and height: A 4-foot garden wall and a 6-foot privacy wall are different structural systems.
- Footing depth: Deeper footings in clay-heavy soil cost more but are the difference between a wall that holds and one that leans again in two years.
- Drainage and geogrid: Retaining applications need both, and skipping them is the most common reason walls fail.
- Removal and disposal: Tearing out an existing wall and hauling it off adds to the total.
The written price breaks out materials, labor, and disposal in line items. If the scope changes mid-job because we find a footing that was never poured, we stop and show you before we proceed – no numbers that move at the door. Every completed job carries the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge.
DIY or Call Us?
A homeowner can safely handle the inspection. Check the plumb of the wall with a level, measure the coursing height to identify the product line, and note whether water pools against the base after rain. Photograph any cracks and note where they run. That’s information we can act on.
What you shouldn’t do is reset a leaning wall or repour a footing on your own. A segmental wall carries real lateral load, and a footing that fails while you’re working around it can drop several hundred pounds of block and coping. Working next to a wall that’s actively moving is a genuine risk of injury, and it’s a job for a crew that knows how to shore and rebuild it. Demolition and re-laying also needs a proper base compaction that hand tools won’t achieve.
If you’re not sure whether it’s cosmetic or structural, call us. We’ll look and give you a straight answer – even if the answer is “leave it alone.” Call (844) 343-6681 to schedule a free estimate.
FAQs

A properly footed Unilock wall or fence in Los Angeles realistically lasts 25 to 40 years before major work, though sunny exposure and clay soil can shorten that. Caps and adhesive joints are the first things to need attention, often in years 8 to 15. The block itself outlasts almost everything else. Call (844) 343-6681 for a free estimate on yours.
Often yes. A single leaning section or a failed column can be rebuilt while the rest of the wall stays, which keeps cost toward the lower end of the $4,130 to $10,620 range. If multiple sections are moving or the footing is compromised along most of the run, replacement is the better call. We tell you which one you’re facing before we quote. Call (844) 343-6681 for a free estimate.
A single section or column rebuild is typically a one- to two-day job; a full fence line is usually three to five days depending on length and footing work. Weather and soil conditions can add a day. We give you the schedule in writing. Call (844) 343-6681 for a free estimate.
We identify your product line by measurement and casting mark, then source the matching units through supplier channels, with a compatible equivalent offered only when an exact unit is discontinued – and only with your approval. You’ll see the material specified in the written quote. Call (844) 343-6681 for a free estimate.
Bradford Remodeling Co Los Angeles works with a documented roster of premium materials across our full service range – Unilock for walls and hardscape, plus KraftMaid, Cambria, and Silestone for interior work – so specifications are traceable and quality isn’t left to guesswork. Our technicians have up to 22 years of experience, and they’re background-checked and uniformed. Bradford is part of the Garrison Partners family, independently owned and operated under The Garrison Standard, and every project gets a written price before work starts. For your Unilock fence installation in Los Angeles, call (844) 343-6681 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












