







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Driveway & Pavers: The Los Angeles Owner’s Guide
We install Belgard-compatible driveway and paver systems across Los Angeles, and a full Belgard paver driveway typically runs $8,260 – $21,240 installed. When a driveway or paver field fails, the part that gives out first is almost never the stone itself: it’s the base, the joint sand, or the edge restraint holding the field together. Owners usually notice it as a low spot that pools water, a paver that rocks underfoot, or a line of sand that keeps washing toward the street after every rain.
Key Takeaways
- Installed Belgard paver driveway pricing in Los Angeles: $8,260 – $21,240.
- The paver is the durable part; the base, joint sand, and edge restraint are what fail.
- Belgard paver lines are manufactured to fixed dimensional standards, so matching new units to an existing field is usually a measurement job, not a hunt.
- Every Bradford installation carries The Garrison Standard: a written price before work starts and the 365-Day Done Right Promise.
Which Belgard Models This Applies To

Belgard revolves its paver lines around fixed dimensional standards, so the first thing we do is measure, not guess. The common Belgard paver families used on Los Angeles driveways include the 4×8 and 4×9 brick-style units, larger slab and plank profiles, and the structural grid pavers sold for drive lanes and utility access. Each has a published nominal size and thickness. A driveway field needs a thicker structural unit than a walkway, and matching the wrong thickness to a drive lane is the most common compatibility mistake we correct.
To identify what’s on your property, pull one loose unit and measure length, width, and thickness with a tape. Check the underside stamp and the original project paperwork if you have it. Measure a clean 10-foot run of pavers and count the joints: that joint count tells you the nominal unit size faster than any photo. If you can’t identify the line, we compare your dimensions against the Belgard catalog before ordering.
The OEM-versus-aftermarket decision is simpler for pavers than for machinery. Belgard pavers are manufactured to standard dimensions with color-blended faces, so an equivalent quality paver in the same size, thickness, and color family will interlock correctly. What you don’t want is a thin, single-color unit from an unknown batch: the color won’t blend with the existing field, and the thickness won’t match the bed depth the field was built on. Bradford Remodeling Co Los Angeles is an independent service provider and is not affiliated with Belgard.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Driveway & Pavers Is Failing
Most Los Angeles pavement failures trace back to water, base preparation, or edge restraint, not to the paver. Here’s what we see on the ground:
- Pavers that rock underfoot. Movement means the bedding layer under the paver has washed out or settled. On drive lanes it usually starts at the tire tracks where load concentrates.
- Sand washing out of the joints. Joint sand erodes when the joints are underfilled or the poly sand was applied over a wet surface. Once joints open, water gets under the field and the cycle speeds up.
- A low spot that pools after rain. Ponding points to base settling or a drainage grade that was never set correctly, a common problem on Los Angeles lots graded toward the street.
- Edge pavers sliding or spreading. Missing or failed edge restraint lets the whole field creep outward. Without a fixed edge, pavers work loose from the perimeter in.
- Efflorescence and chalky white haze. Mineral salts drawn to the surface are cosmetic in most cases, but they signal moisture moving through the system and are worth a look at the base and drainage.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A Belgard paver driveway installation in Los Angeles runs $8,260 – $21,240. The range is driven by square footage, the thickness and profile of the paver, how much existing pavement and base has to come out, and whether the job needs drainage corrections or new edge restraint.
- Paver driveway installation: $8,260 – $21,240
- Driveway replacement (full tear-out and rebuild): $5,900 – $16,520
- Driveway sealing: $295 – $825
- Paver patio installation, if the scope extends to the back: $4,130 – $12,980
Our price is written before any tool comes out of the truck, and it doesn’t move at the door. Every completed driveway and paver field carries the 365-Day Done Right Promise: a full-year written guarantee, and if the work fails inside that window we return and correct it at no charge.
DIY or Call Us?
An owner can safely do some things here. Re-sanding open joints with the correct joint sand, washing off efflorescence with the right cleaner, and measuring and counting pavers to identify your line are all reasonable weekend work. What tends to go wrong is the base. Lifting pavers to reset a low spot without rebuilding the bedding layer underneath just moves the problem, and a driveway field that isn’t properly compacted and edged will fail again within a season. Structural repairs on a drive lane, where vehicles bear on the field, are worth handing to a crew that can verify the base and the edge. Call (844) 343-6681 and we’ll tell you straight whether your job is a reset or a rebuild.
FAQs

A properly built Belgard paver driveway – correct base depth, compacted bedding, filled joints, and solid edge restraint – typically holds for decades, but the base and joint sand wear out well before the pavers do. Los Angeles gets the sun and the dry season, then concentrated rain that stresses drainage; a field that drains correctly survives that cycle, and one that doesn’t will show movement and washout years before the stone is spent. Call (844) 343-6681 for a free assessment.
Often yes. Localized movement, washed-out joints, and a single low spot can typically be reset and re-sanded rather than torn out, provided the base underneath that section is still sound. Wide-field settling, failed edge restraint, and drainage that pushes water under the pavers usually require a partial or full rebuild. We inspect the base before quoting so you’re not paying for a full replacement when a repair will hold.
A single-section reset or joint re-sand is often a one-day job, while a full driveway rebuild depends on square footage, tear-out, and whether drainage has to be corrected – plan on several days for a complete paver driveway. We give you the schedule in writing with the price so you know what to expect before work starts. Call (844) 343-6681 to schedule a free estimate.
We identify your existing paver by measuring length, width, and thickness against the Belgard catalog, then specify an equivalent quality unit in the matching size, thickness, and color family so the new pavers interlock and blend with the field. We work from a documented roster of name-brand materials, including Belgard, Unilock, and other manufacturer-backed specs, so the materials carry manufacturer warranties that back our own guarantee. We don’t claim to stock parts or carry pavers on a truck, so your units are ordered to your job. Call (844) 343-6681 for a free estimate.
Beyond Belgard hardscaping, our documented brand roster includes KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, and more. Every Bradford project is held to the Garrison Standard: a written price before any work starts, background-checked and uniformed technicians, a live person answering the phone 24/7 at (844) 343-6681, and the 365-Day Done Right Promise on completed work. Call (844) 343-6681 for your free estimate.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












