







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Fence Installation: The Los Angeles Owner’s Guide
We install ActiveYards-compatible fencing in Los Angeles for $4,130 to $10,620, and that figure is a written price before any work starts. Most ActiveYards repairs we handle are scheduled within days, not weeks, because the panels and posts are modular and the swap is straightforward. Owners usually find out something is wrong the same way: a gate that drags the concrete by mid-summer, a post that leans after the first Santa Ana wind event, or a panel that rattles when the 405 traffic hums through the neighborhood. By the time you notice the lean, the footer has usually been moving for a season.
Which ActiveYards Models This Applies To

ActiveYards builds vinyl and aluminum fencing across several product lines, and the parts are not interchangeable between them. The company’s vinyl lines include the Wakefield, Berkshire, and Lakeland series, each with its own post profile and rail spacing. Aluminum products sit on yet another set of dimensions. If you’re matching a replacement panel or post, the model number is usually stamped on the inside of the top rail or printed on a sticker inside the post cap. If the sticker has weathered off in the Los Angeles sun, measure the post face instead: 4-inch, 5-inch, and 6-inch posts all exist, and the rail pockets are cut to match exactly.
We are an independent service provider. We are not affiliated with ActiveYards, and we don’t claim to stock their parts. What we do is source components that match your existing profile, either OEM from the manufacturer’s dealer network or a quality aftermarket equivalent when the OEM lead time is unreasonable. For most vinyl repairs, aftermarket rails and pickets match well because the profile standards are tight. For aluminum, OEM is usually the safer call because the powder-coat color and extrusion dimensions vary more between suppliers.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ActiveYards Fence Installation Is Failing
- A post that leans after rain or wind. In Los Angeles, the cause is almost always a footer set too shallow or concrete mixed too dry. Clay-heavy soil in areas like the San Fernando Valley expands and contracts with the seasonal moisture swings, and a 24-inch footer that works in sandy ground will heave here.
- Panels that rattle or shift in the wind. The rail-to-post connection has loosened, either because the screws backed out or the rail tabs cracked. Vinyl gets brittle after a decade of UV exposure, and the tabs are the first thing to go.
- Visible cracks at the post base or along a rail. Hairline cracks in vinyl are normal aging, but a crack that runs through the wall of a post means the structural section is compromised and the post should be replaced, not patched.
- A gate that sags or drags. Gate hardware takes more load than the rest of the fence, and hinges wear faster. A dragging gate usually means hinge replacement, not a full gate rebuild, but the post it hangs from needs to be checked too.
- Fading or chalking that goes beyond surface dullness. Los Angeles UV is hard on vinyl. Mild chalking is cosmetic. White streaking that won’t wash off and a surface that feels chalky to the touch usually means the top layer of the extrusion has degraded.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

ActiveYards-compatible fence installation in Los Angeles runs $4,130 to $10,620 for a typical residential run. The range moves with linear footage, post count, gate inclusion, and whether the existing footer can be reused or has to be dug out and repoured. A single post replacement sits at the low end. A full run with a new gate sits at the high end. Both ends of the range are the installed price, which includes demolition of the failed section, haul-away, new components, and labor.
Every price is written before we start, and it does not move once the work begins. You will not get a number at the door that changes when the crew arrives. The finished work carries the 365-Day Done Right Promise: if the installation fails inside that year, we come back and correct it at no charge. That covers the labor and the components we supplied, in writing, on the same sheet as the price.
| Scope | Installed range |
|---|---|
| Vinyl fence installation (Los Angeles) | $4,130 – $10,620 |
| Aluminum fence installation (Los Angeles) | $4,720 – $11,800 |
DIY or Call Us?
A homeowner can safely check a lot of this without tools. Walk the line and push on each post. Measure from the post face to confirm the profile. Look at the rail tabs for cracks. Read the model sticker if it’s still legible. Note the color name if you can find it. That information shortens the quote and sometimes saves a trip.
Where DIY goes wrong is at the footer. Digging out a set post, repouring concrete at the right depth and mix for Los Angeles clay soil, and resetting the post plumb is a two-person job with real consequences if it’s done badly. A post that’s set an inch off plumb will pull the whole run out of line by the time you’re six panels down. Fencing also sits on or near property lines, and in Los Angeles a mis-set post can land you in a conversation with a neighbor or a city inspector you’d rather not have. We pull the permits where they’re required and pass the inspection.
Call (844) 343-6681 for a free estimate. We answer the phone with a live person, not a queue.
FAQs

Most ActiveYards vinyl runs hold up 15 to 25 years in Los Angeles conditions, with the footer often failing before the vinyl does. UV exposure here is intense enough that white and light-colored panels will show noticeable fading after 8 to 10 years, but fading is cosmetic and doesn’t affect structure. The posts matter more: a properly set footer in Los Angeles soil is what determines whether you get 20 years or 8. Call (844) 343-6681 for an exact quote on your run – estimates are free.
A cracked post cannot be repaired safely and should be replaced. A cracked or split panel can sometimes be swapped for a single panel without touching the rest of the run, which is the cheaper path when the posts are sound. We check the post first because a panel that cracked usually did so because the post behind it moved. Call (844) 343-6681 for an exact quote – estimates are free.
A single post or panel swap is usually a half-day job. A full run replacement is typically one to two days depending on linear footage and whether the old footers have to come out. We tell you the window in writing before we start, and we don’t leave the site until it’s clean and the guarantee is in your hand. Call (844) 343-6681 for an exact quote – estimates are free.
We source OEM components through the manufacturer’s dealer network and use quality aftermarket equivalents only where the profile match is verified against your existing measurements. We don’t claim to stock ActiveYards parts locally, and we don’t carry them on a truck. We confirm the match before we order, and we tell you which route we’re taking and why. Call (844) 343-6681 for an exact quote – estimates are free.
We also work with KraftMaid, Cambria, and Silestone on remodeling projects, and the same written-price discipline applies to every job we run in Los Angeles. The Garrison Standard is the framework behind that: a documented scope, a written number before any tool comes out, background-checked and uniformed technicians on every job, and a live person on the phone whenever you call. When the job closes, you should have a clean site, a signed written guarantee, and a written record of exactly what was done.
Call (844) 343-6681 for a free estimate. A live person answers, day or night, and you’ll have a written price before we start.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












