







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Kitchen Remodeling: The Los Angeles Owner’s Guide
If your ActiveYards kitchen components are failing, we install ActiveYards-compatible kitchen remodeling work in Los Angeles, with typical installed projects running from $16,520 to $53,100 depending on scope, cabinets, and surfaces. Most owners don’t notice the problem on a schedule. They notice it when a drawer box sticks halfway, a door hinge lets go at the top corner, or a cabinet face shows a hairline crack after a dry Santa Ana heat stretch. By the time you’re reading this, something has already told you the original build isn’t holding the way it should. The question is whether you replace the failing piece, or step back and price the whole room. We give you a written number before anything gets ordered.
Which ActiveYards Models This Applies To

ActiveYards builds cabinetry and outdoor living products to spec, and the kitchen line varies by series and run. Before we quote anything, we identify what you actually have. That means reading the label inside the cabinet box (usually on the back panel or the inside of a door), measuring the box depth and the door overlay, and checking the drawer glide pattern. A 12-inch-deep wall cabinet and a 24-inch base cabinet take entirely different hardware, and a full-overlay door won’t accept a partial-overlay hinge no matter how carefully you match the finish.
The compatibility gotcha we run into most in Los Angeles: box dimensions on earlier ActiveYards runs don’t always match current catalog sizing, so an off-the-shelf replacement door or drawer front can be a quarter inch off and never sit flush. Measure the opening, not the old door. On OEM versus aftermarket, OEM gets you an exact fit and the factory finish match; a quality aftermarket equivalent costs less and works fine on glides, hinges, and shelf pins, but we won’t put an aftermarket front on a visible cabinet run where the sheen won’t match the rest of the room.
We’re an independent service provider. We’re not affiliated with ActiveYards, and we don’t claim to be. We also install and service KraftMaid, Cambria, and Silestone cabinetry and surfaces.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ActiveYards Kitchen Remodeling Is Failing
- A drawer that sticks or drops on one side. The glide or the box side has worn or the mounting screw has pulled from the substrate. In older boxes, the particleboard around the screw hole crushes and the glide never holds again until the hole is drilled and plugged.
- A door that sags at the top hinge. Either the hinge screws have loosened or the hinge plate has bent. If the door still swings true after tightening, it’s hardware; if it drags the frame, the box has shifted.
- Hairline cracks in the cabinet face or finish checking. Los Angeles interior humidity swings from dry Santa Ana weeks to coastal damp, and engineered panels move with it. A crack near a joint usually means the panel was fastened tight with no allowance for movement.
- Soft or swollen spots at the base or under the sink. Water has reached the substrate, the board under the finish. Once it swells, it doesn’t dry back to size, and no finish repair hides it.
- Racking or a run that feels loose when you lean on the counter. The cabinet boxes have separated from the wall or from each other. This one is worth checking early – a loose run puts load on the countertop and the plumbing rough-in behind it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the work actually runs in Los Angeles. These are installed ranges, parts and labor together, and every one of them gets a written price before we order a single piece.
| Scope | Installed Range (Los Angeles) |
|---|---|
| Full kitchen remodel | $16,520 – $53,100 |
| Small kitchen remodel | $10,620 – $23,600 |
| Cabinet installation | $4,720 – $15,340 |
| Countertop installation | $2,360 – $7,670 |
| Backsplash installation | $945 – $2,950 |
| Kitchen island installation | $3,540 – $11,800 |
What moves the number: cabinet box count and whether the layout changes, the surface material (a quartz product like Cambria or Caesarstone sits at the top of the countertop range), and whether the plumbing or electrical rough-in has to move. Parts-plus-labor is itemized, not bundled into a single line you can’t read. The 365-Day Done Right Promise covers the completed installation for a full year – if the work fails inside that window, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself. Open and close every drawer and door and note which ones drag. Tighten a loose hinge screw with a screwdriver and see if it holds. Look under the sink with a flashlight for swelling or staining. Measure the cabinet opening if you’re planning to order a replacement front.
Where DIY goes wrong: swapping a drawer glide or hinge on a loaded cabinet without supporting the box, or trying to re-anchor a cabinet run that has pulled from the wall. A cabinet run carries the countertop, the sink, and the plumbing behind it. If it’s racked, the fix isn’t a bracket from the hardware store. Shut off the water before anything under the sink gets moved, and if you see moisture damage to the substrate, don’t seal over it. Call us at (844) 343-6681 and we’ll tell you what we’re seeing.
FAQs

Cabinet boxes and doors typically hold 15 to 25 years in a Los Angeles interior, but hardware (glides and hinges) is the first thing to go, often at 8 to 12 years. The dry-to-damp swing in Southern California interiors is hard on engineered panels and finish, so a cabinet that was installed tight with no movement allowance can fail early at the joints. Call (844) 343-6681 if you’re unsure how much life is left – estimates are free.
Yes, in many cases. A single drawer glide, a hinge, or a door front can be replaced without touching the rest of the run, and that’s usually the right call when the boxes are sound. Repair stops making sense once the substrate has swelled from water or the boxes have separated from the wall. We’ll tell you which one you’re looking at before quoting anything.
A single part swap – glide, hinge, or door front – is usually a short visit. A full cabinet run or a countertop replacement runs longer and depends on lead time for the material, which we confirm in writing before you commit. We schedule the work and give you the window up front, not a vague “sometime next week.”
We identify the model and box dimensions first, then source the OEM part where exact fit and finish matter and a quality equivalent where it doesn’t. We don’t carry parts on a truck or hold stock – we order to your spec. That’s slower than grabbing something off a shelf, but it’s the only way to get a door front that actually sits flush.
We do. A like-for-like part replacement usually doesn’t trigger a permit, but moving a sink, adding an island circuit, or relocating a gas line does, and we pull the permit and take it through inspection. Our technicians have up to 22 years of experience, and every job closes with a clean site, a documented scope, and your signed written guarantee in hand.
If your ActiveYards kitchen is failing, don’t guess at the part and don’t let a no-show crew put a number on it at the door. We put the price in writing before work starts, answer the phone with a live person 24/7, and back every completed project with the 365-Day Done Right Promise. Call Bradford Remodeling Co Los Angeles at (844) 343-6681 for a free estimate.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












