







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Fence Installation: The Los Angeles Owner’s Guide
Jerith fence installation in Los Angeles typically runs $4,130 to $10,620 installed, depending on linear footage, style, and how much site prep your property needs. If you’re here because a gate, post, or panel has started to sag or lean, you’re in the right place. Most Los Angeles owners discover the problem the same way: a gate that drags on the concrete, a post that’s tilted after a dry summer, or a section that looks off after the first Santa Ana wind of the season. We’re an independent contractor and not affiliated with Jerith. We install Jerith-compatible aluminum ornamental fence systems across Los Angeles, and we put the price in writing before any work starts.
Key Takeaways
- Installed Jerith fence projects in Los Angeles run $4,130 to $10,620, quoted in writing up front.
- Jerith is aluminum ornamental fencing, so the common failure isn’t rust; it’s foundation, gate hardware, and impact damage.
- Every completed install carries our 365-Day Done Right Promise, corrected at no charge if the work fails within the year.
- Live person on the phone 24/7 at (844) 343-6681.
Which Jerith Models This Applies To

Jerith builds aluminum ornamental fence and gate systems in several residential series, and the installation itself follows the same structural logic across them: footer, post, panel, gate. Where owners get stuck is matching hardware and spacing to the exact series. Panels are sold in nominal heights (commonly 48, 54, and 60 inches) and the picket spacing varies by style, so a replacement section has to match both the height and the style profile to sit flush against your existing run. The model tag is usually stamped on the post cap or listed on the original gate hardware. Measure the panel height and the gap between pickets to the nearest eighth of an inch before you order anything.
On the OEM-versus-aftermarket question for Jerith specifically: original panels are the safe choice for anything visible from the street, because the powder-coat color and picket profile have to match the run. For hidden hardware, hinges, and latches, a quality aftermarket equivalent is often fine if it’s rated for aluminum posts and the same gate weight. The trap is buying a steel hinge from a big-box shelf; the metals react differently and the gate starts to bind within a season. If you want the part sourced and installed together, call us and we’ll quote the whole scope.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Fence Installation Is Failing
- Gate dragging on the ground or hard to latch. Usually the post has shifted or the hinge has worn. Aluminum gates are light, so when they drag, the foundation is moving, not the gate.
- Posts leaning after dry weather. Los Angeles soil expands and contracts hard between wet winter and dry summer. A shallow footer will heave; a properly set post in our climate needs depth below the active soil zone.
- Panels out of plumb or racked. A single failed post pulls the whole run out of alignment. You’ll see it as panels that are no longer square to the ground line.
- Loose or missing pickets, or a bent section. Physical impact from a car, a wheelbarrow, or landscaping equipment. Aluminum dents and bends; it doesn’t rust the way steel does.
- Powder-coat chalking or fading on the sun side. Our UV load is brutal. Fading is cosmetic, not structural, but it tells you the fence has been in place a while and the hardware underneath may be at the end of its life.
Our technicians have up to 22 years of experience, and on a Los Angeles install we check the footer depth and gate swing before we touch a panel. If a post is failing, patching the panel above it just kicks the problem down the road.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Jerith fence installation in Los Angeles, plan on $4,130 to $10,620 installed. That range covers panels, posts, gate hardware, concrete footings, and cleanup. What pushes you toward the top: a long run, a slope that needs stepped footers, a driveway gate, or removal and haul-away of an old fence. What keeps you near the bottom: a straight run on flat ground with a single walk gate.
We give you a written price before any work starts, laid out line by line so you can see where the money goes. No numbers that move at the door. Every install is covered by our 365-Day Done Right Promise: if the work fails within the full year, we come back and correct it at no charge. Background-checked, uniformed technicians show up, and you’ll know who’s coming before the crew arrives.
| Scope | Typical Installed Range (Los Angeles) |
|---|---|
| Standard Jerith-compatible aluminum fence run | $4,130 – $10,620 |
| Gate hardware and re-hang | Quoted as part of the run |
| Old fence removal and haul-away | Adds to the top of the range |
DIY or Call Us?
You can safely check a few things yourself: walk the run and look for leaning posts, test the gate swing, and photograph the model tag on the post cap. That information helps us quote accurately. Where DIY goes wrong on this part is the footer. Digging and setting an aluminum post to the right depth in Los Angeles soil, then getting the panel square and the gate swing true, is harder than it looks. A shallow post heaves by the second summer.
And frankly, a leaning fence isn’t just an eyesore; it’s a security gap. A gate that doesn’t latch is a gate that doesn’t keep anything in. If your post is already moving, and you’re not sure of the footer depth, that’s the point to call (844) 343-6681. We’ll give you a free estimate and a written price before anything starts.
FAQs

A properly installed Jerith aluminum fence can last 20 years or more in Los Angeles, with the powder coat and the footings being the two things that decide it. Our sun and dry-to-wet soil swing are what wear footings first, so footer depth matters more here than in milder climates. The aluminum itself won’t rust.
Often, yes. A leaning post or a dragging gate can frequently be re-set and re-hung rather than replaced, and a single bent panel can be swapped out. We’ll tell you honestly at the estimate whether repair or replacement is the better spend. Call (844) 343-6681 for a free estimate and we’ll look at it with you.
A standard Jerith-compatible run is typically a day or two, depending on length and how many footings need setting. A single panel or gate hardware swap is usually done in a few hours. The written scope tells you the expected timeline before we start.
We source Jerith-compatible panels and hardware matched to your model, height, and picket profile, and we document the brands we install so the spec is traceable. We don’t stock parts on a truck; we source to your job, which is why the measurement step matters. Call (844) 343-6681 to schedule your free estimate.
We also install KraftMaid, Cambria, and Silestone in the homes we work in across Los Angeles, part of a documented roster of name-brand materials so specifications stay traceable. Bradford Remodeling Co Los Angeles operates under The Garrison Standard, part of the Garrison Partners family since 2004, every location independently owned and operated.
Call (844) 343-6681 for a free estimate. We answer with a live person 24/7, give you a written price before any work begins, and stand behind every install with our 365-Day Done Right Promise.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












