







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Kitchen Remodeling: The Los Angeles Owner’s Guide
Kitchen remodeling for Americast and Ameristar-era cabinet and fixture packages in Los Angeles typically runs $16,520 – $53,100 installed, depending on cabinet run, surface square footage, and whether the layout moves. We don’t do same-day remodels; nobody should. What we do is put a written price in your hand before a single tool comes out, then finish on that number under the 365-Day Done Right Promise.
Owners usually find out something is wrong the same way. A drawer front that Ameristar glued and stapled at the factory starts to separate from the box in a Woodland Hills summer. A cabinet hinge that held fine for a decade sags, and the door no longer sits flush. A laminate countertop edge lifts near the sink. That’s the moment the search begins, and it’s usually a search for a part. We help Los Angeles homeowners sort out whether it’s a part problem or a whole-kitchen problem.
Key Takeaways
- Most Ameristar kitchen failures Los Angeles homeowners call about are hinge, drawer-box, and surface failures, not structural cabinet carcass problems.
- Parts sourcing matters. Ameristar-specific hinge and drawer hardware is not interchangeable with generic big-box replacements.
- A written price range for kitchen work in Los Angeles is $16,520 – $53,100. A single cabinet part repair sits at the bottom of that scale.
- Bradford Remodeling Co Los Angeles is an independent service provider, not affiliated with Ameristar.
- Every completed job carries the 365-Day Done Right Promise. If the work fails within a year, we return and make it right at no charge.
Which Ameristar Models This Applies To

Ameristar is a trading name used across several cabinet and casework lines sold through regional distributors, so exact model matching matters more than the brand badge. Before we quote anything, we open the door and read the cabinet’s own labels. Most Ameristar cabinets carry a sticker inside the upper cabinet door, on the inside face of the stile or on the back panel, with a model or series code and a manufacture date. That code is what tells us which hinge pattern, drawer glide, and shelf-pin spacing the box was built for. Generic replacements rarely line up.
Two compatibility realities matter in Los Angeles. First, Ameristar drawer boxes often use a 32mm system bore for shelf pins but a proprietary drawer glide clip on some lines. A standard side-mount glide will not seat cleanly in the original bore. Second, cabinet door thickness varies between Ameristar lines, usually somewhere in the 3/4-inch to 13/16-inch range. A hinge rated for a thinner door will bind and tear the screw bites out of the stile over a season. Those two specs are the ones we check most often.
On the OEM-versus-aftermarket question, we give the same answer to every Los Angeles homeowner: OEM is the safe call when the exact model code is still in production. When it isn’t, we match by measurement and spec, not by matching the name. That’s where a documented brand roster helps. We also work with KraftMaid, Cambria, and Silestone on the same kind of matching, so the process isn’t unfamiliar.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Kitchen Remodeling Is Failing
Here are the five things we hear most from Los Angeles owners, and what’s actually happening underneath each one.
- Cabinet doors that no longer sit flush. The hinge plate has lost its grip on the stile. Screw holes wallow out over time, especially in kitchens with humidity swings, and no amount of adjusting brings the door back to square.
- Drawers that stick or drop on one side. A drawer glide has worn or the box has flexed at the rear dado. This is the most common Ameristar drawer failure and it is often fixable without replacing the whole box, but only if we catch it before the stile splits.
- Countertop edge lifting near the sink or range. Moisture has reached the substrate beneath the laminate or solid surface. Los Angeles kitchens with poor under-sink ventilation see this first, and the fix is a surface replacement, not a patch.
- Door front separating from the box. The factory glue joint has failed. It shows up as a visible gap along the stile, and the door becomes a safety issue if it’s a lower cabinet holding food storage.
- Cabinet carcass sagging under the weight of dishes. Shelf pins or a shelf rail have failed. Simple to address if caught early. Left alone, the shelf falls and takes the shelf below with it.
If more than one of those is happening across a single run of cabinets, the honest answer is that the cabinet package has reached the end of its useful life, and a cabinet installation at $4,720 – $15,340 will be the more sensible spend than chasing individual parts.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Los Angeles kitchens, here’s what the numbers look like. These are installed prices, meaning labor and materials together, quoted in writing before work starts.
- Full kitchen remodel: $16,520 – $53,100
- Small kitchen remodel: $10,620 – $23,600
- Cabinet installation: $4,720 – $15,340
- Countertop installation: $2,360 – $7,670
- Backsplash installation: $945 – $2,950
- Kitchen island installation: $3,540 – $11,800
What pushes a Los Angeles kitchen toward the top of the range is not the parts list. It’s whether the layout moves, whether the electrical and plumbing rough-in needs to shift, and whether the surface is natural stone or an engineered quartz. A single Ameristar hinge or drawer glide swap sits at the very bottom of these ranges, because it’s an hour of labor and a part, not a project.
Every item on that list comes with the 365-Day Done Right Promise. That’s a written guarantee on the completed work for a full year. If the installation fails inside that window, we return and correct it at no charge. The price you’re quoted is the price you sign.
DIY or Call Us?
Some of this is safe for a homeowner to check. Some of it is not.
What you can safely do: open a cabinet door and read the label. Measure the door thickness with a tape measure. Note whether the drawer glide is side-mount or undermount. Take a photo of the hinge with the door open. That’s information we need to quote accurately, and you can gather it in under five minutes.
What we’d rather you not do: unscrew a drawer glide that’s holding a heavy box, or try to re-seat a hinge plate into a stile that’s already splitting. The real risk isn’t the electrical or gas side, since a cabinet hardware swap doesn’t touch either. The risk is a falling drawer box or a door that drops off the frame with a hand still on it. It also makes the repair harder. Once a screw has been driven into a stripped stile, we’re filling it before we can reuse it. Call (844) 343-6681 and we’ll walk you through what you’re looking at, free.
FAQs

Ameristar kitchen hardware in Los Angeles typically runs 8 to 12 years before hinges and drawer glides start to fail, and cabinet carcasses usually hold 15 to 20 years if the kitchen stays dry. The Los Angeles climate is actually more forgiving than most on cabinetry, since we don’t have freeze-thaw cycles warping boxes. What shortens life here is moisture from sinks and ranges in kitchens with poor ventilation, and afternoon sun on cabinets facing west. Call (844) 343-6681 for a look at yours; estimates are free.
Yes, in most cases. A worn drawer glide or a hinge that has lost its bite on the stile can be repaired without replacing the cabinet box, as long as the stile isn’t cracked. Once the wood is split, we’re replacing the door, not the hinge. That’s why we ask for photos up front. Call (844) 343-6681 and we’ll tell you which side of that line your cabinet is on.
A single hinge or drawer glide repair usually takes an hour or two. A full cabinet installation on a Los Angeles kitchen runs three to five working days, and a full kitchen remodel runs three to six weeks depending on whether the layout moves. We give you the number before we start, and it doesn’t change at the door. Call (844) 343-6681 to schedule your free estimate.
We start with your cabinet’s model or series code, usually on a sticker inside an upper cabinet door, and match the part by that code plus measurements from the door and box. When the exact Ameristar line is no longer in production, we match by specification, not by the name on the box. We don’t claim to stock Ameristar parts, and we don’t carry parts on a truck. What we do is source the right one for your model and install it to spec. Call (844) 343-6681 for a free estimate.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












