A Bradford company - serving Los Angeles, CA
An open living room and dining area after a whole-home remodel
T
Therma-Tru · Los Angeles

Therma-Tru Driveway & Pavers in Los Angeles, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Los Angeles
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
New painted shaker cabinets with an organized deep drawer
A remodeled hall bathroom with patterned floor tile and painted walls
A small remodeled galley kitchen with cabinets to the ceiling
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Therma-Tru Driveway & Pavers: The Los Angeles Owner’s Guide

We install and repair Therma-Tru-compatible driveway and paver assemblies across Los Angeles, with paver driveway installation typically running $8,260 – $21,240 and concrete driveway installation at $5,310 – $14,160. We’re an independent service provider, not affiliated with Therma-Tru. Most owners discover the failure the same way: a paver lifts at the edge of the door swing, water pools against the threshold after a rain, or a Therma-Tru sill plate starts weeping into the frame after a hot, dry summer followed by the first hard storm. That pattern of complaint is the tell. It’s rarely the door that’s failing on its own. It’s the transition between the Therma-Tru system and the hardscape underneath it, and Los Angeles soil movement makes that transition the weak point on almost every aging driveway we open up.

Call (844) 343-6681

Which Therma-Tru Models This Applies To

A remodeled primary suite with built-in wardrobes and a window seat

Therma-Tru entry systems use a sill and threshold profile that has to meet your paver field at the correct height, which is why the paver work here is model-specific rather than generic. The lineup breaks into three families that matter: Fiber-Classic and Smooth-Star entry doors, the Classic-Craft door line, and the Pulse and Benchmark series for newer builds. Each family carries a different nominal sill height, and a paver re-set that ignores that difference is the single most common reason a Los Angeles driveway door leaks after a replacement.

To identify your part correctly, find the Therma-Tru label on the door jamb or the top hinge edge of the slab. It lists the series, the door width, and the swing. Measure the threshold height from the exterior finished grade to the sill cap, not to the door frame, and write that number down. That measurement is the one that decides how the top course of pavers meets the sill. On OEM versus aftermarket: for the paver and transition assembly around a Therma-Tru system, quality aftermarket hardscape is often the right call if it’s specced to the same dimensions. For the sill cap and threshold components themselves, we stick to Therma-Tru-compatible OEM parts so the profile matches. Using the wrong one changes the water line and voids the door’s weather performance.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Therma-Tru Driveway & Pavers Is Failing

  • Water pooling at the threshold after rain. The paver field has settled below the sill or lost its slope away from the door. On Los Angeles clay soil, a paver driveway that wasn’t compacted to spec drops a quarter inch in a season.
  • A paver lifting or rocking at the door swing. The bedding layer under that paver has washed out or the base wasn’t deep enough. A rocking paver near the Therma-Tru sill puts point load on the threshold every time you step through.
  • Weeping or staining inside the frame at the sill cap. The sill cap seal has given out and water is riding back under the Therma-Tru threshold. This one is a door-and-paver problem at the same time, and it’s the one to fix first.
  • Joint sand washing out of the paver field. Los Angeles heat dries the joints and wind lifts the sand, opening gaps that let water past the base. Left alone, the whole field loosens near the door.
  • Visible sunken band along the door edge. The pavers next to the Therma-Tru system have dropped lower than the rest of the field. That edge is the most loaded part of the driveway and the first to fail.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A walk-in shower with large-format tile and a built-in niche

Paver driveway installation in Los Angeles runs $8,260 – $21,240 depending on square footage, base depth, and how much of the field is being re-set versus replaced. If your Therma-Tru transition is the only failing zone, a partial repair often lands far below the full-install figure, and we’ll say so rather than quote you a full paver tear-out. Concrete driveway installation comes in at $5,310 – $14,160, asphalt driveway paving at $4,130 – $10,620, and driveway replacement at $5,900 – $16,520. Driveway sealing, if that’s all your field needs, is $295 – $825.

Scope of work Los Angeles installed range
Paver driveway installation $8,260 – $21,240
Concrete driveway installation $5,310 – $14,160
Driveway replacement $5,900 – $16,520
Asphalt driveway paving $4,130 – $10,620
Driveway sealing $295 – $825

What drives the range: base depth and compaction, the number of courses re-set at the Therma-Tru sill, paver grade, and how much demolition the old field requires. Every Bradford price is a written line-item before work starts, with a full scope, so you see the parts and labor split rather than a single number that moves. Every completed job carries the 365-Day Done Right Promise: if the work fails inside a full year, we come back and correct it at no charge.

DIY or Call Us?

What you can safely check on your own: walk the paver course next to your Therma-Tru door and press down. If it rocks, or you can see a gap under the sill cap, you’ve found the problem. Look for pulled-back joint sand and any staining on the interior sill. Those checks are free and they’ll tell you whether you need a repair visit at all.

Where DIY goes wrong: re-setting a paver course at a Therma-Tru transition requires getting the base compaction and the sill height right in the same operation. A homeowner who re-lays pavers without matching the sill height can push the water line above the door’s weather seal, and now you have an interior water problem on top of a walkway problem. A paver re-set that “looks fine” and fails in the first hard rain is the pattern we see over and over in Los Angeles. Our technicians have up to 22 years of experience and they measure twice before they set a single course. Call (844) 343-6681 and we’ll give you a written price before any work begins.

FAQs

A wide opening with a new beam where the kitchen wall was removed

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A finished backyard cottage with a small covered porchA remodeled primary bathroom with a soaking tub and walk-in showerA second-story addition that matches the existing rooflineA galley kitchen opened up to the dining room with a new peninsulaA stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled hall bathroom with subway tile and a floating vanity

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Los Angeles

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Los Angeles team

A local vetted partner works across Los Angeles and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 343-6681
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Bradford Remodeling Co Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch