







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Home Additions & ADU: The Los Angeles Owner’s Guide
We build and finish home additions and ADUs on ECO Window Systems openings across Los Angeles, and a full addition runs $53,100 – $153,400 installed, while a detached or attached ADU runs $106,200 – $259,600. A garage conversion sits at $35,400 – $94,400. Owners usually land on this page after a permit reviewer or a framing inspection flags that the new wall, roofline or egress window opening doesn’t line up with the ECO Window Systems unit already set into the existing envelope. Call (844) 343-6681 for a free written estimate. We’re an independent contractor and not affiliated with ECO Window Systems.
Here’s the honest framing: the “part” in your case is the window or door unit itself, and the failure shows up when you tie a new addition into it. The new structure loads the frame differently, changes drainage, or moves the egress opening. A rough opening sized for the old wall rarely fits the new one without a plan.
Which ECO Window Systems Models This Applies To

ECO Window Systems builds vinyl and aluminum window and door lines for residential and light commercial work. The unit model is stamped on the manufacturer label inside the head jamb or on the glass spacer, and it usually carries a series prefix, an ordering code and a size call-out (width x height, in that order). Photograph that label before any demolition. It’s the single most useful thing you can do for whoever matches the new unit.
Compatibility gotchas we see in Los Angeles:
- SPF vs. aluminum series. A vinyl unit spec’d for one rough-opening tolerance won’t seat into a masonry or stucco opening shimmed to a different one. The head and sill clearances differ.
- Egress sizing. Bedroom egress in an ADU must hit the clear-opening minimum, and a replacement unit with the same rough opening can still fail if the sash and frame eat into the opening. Measure the clear opening, not the frame.
- Impact and wind ratings. Units ordered for coastal exposure carry different glazing and anchoring than inland stock. The label tells you which you have.
On OEM versus aftermarket: matching the OEM unit keeps the original warranty intact and avoids re-flashing surprises. A documented aftermarket equivalent can work when the OEM lead time blows past your framing schedule, but only if the anchoring and weather barrier details are written into the scope. We spec against name-brand, documented products, the same discipline we use with KraftMaid, Cambria and Silestone on interior work. We don’t stock parts, and nothing rides on a truck; every unit is sourced to your label and your measurement.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ECO Window Systems Home Additions & ADU Is Failing
- Water staining or soft drywall at the new-to-old wall joint. The addition’s flashing and the existing unit’s sill pan aren’t shedding water together. In Los Angeles, the first real rain after a summer build exposes it every time.
- A draft or visible gap along the head or jamb. The rough opening moved, or the shims settled. That gap is a path for air, moisture and pests.
- Sticking sashes or a door that won’t latch square. New framing is loading the old unit. Left alone, the frame racks and the glass seal fails.
- Fogging between panes. The insulated glass seal is gone. Heat gain from a west-facing wall in the San Fernando Valley accelerates it.
- Cracks or bubbling stucco around the opening. The interface between the addition and the unit isn’t moving together. That’s a water path waiting for the rainy season.
Replacement Cost & What’s Included

Installed pricing in Los Angeles, using our written range schedule:
| Scope | Installed range |
|---|---|
| Home Addition (full build, ECO-compatible openings) | $53,100 – $153,400 |
| ADU Construction | $106,200 – $259,600 |
| Garage Conversion | $35,400 – $94,400 |
| Window Replacement (per unit, tie-in context) | $5,310 – $17,700 |
| Impact Window Installation | $9,440 – $29,500 |
The range moves on square footage, whether the addition is attached or detached, foundation type (slab versus raised), and how many ECO units you’re tying into. Permit fees and structural engineering run separately and we itemize them. Every price is written before a tool comes out, with no numbers that move at the door. All finished work carries the 365-Day Done Right Promise: if it fails inside that window, we come back and correct it at no charge. Our technicians have up to 22 years of experience.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely read the model label, measure the rough opening and take photos. That’s a real head start and we’ll use it.
What you shouldn’t do yourself: re-flash an existing unit to a new addition, cut structural framing, or re-anchor a unit that’s now part of a load path. Getting the weather barrier and anchorage wrong turns a small job into a wall replacement, and in Los Angeles a missed inspection means tearing back into finished drywall. A crew with background-checked, uniformed technicians and a written scope handles the load and the water in one pass. Call (844) 343-6681 and we’ll talk through what you’re seeing.
FAQs

How long does an ECO Window Systems unit last? A well-installed unit typically runs 20 to 30 years. In Los Angeles the seal goes first on west- and south-facing glass, and a failing seal is what triggers replacement long before the frame does. Call (844) 343-6681 for a free estimate if yours is fogging.
Can it be repaired instead of replaced? Often yes for a single failed pane or a settled frame. If the rough opening or flashing is wrong, the fix is rebuild, not a bandage, and we’ll tell you which it is in writing. Call (844) 343-6681 for a free estimate.
How quick is the swap? A single window replacement is a one-day job in most cases. Tying a unit into a new addition or ADU is a scheduled phase of the build, not a same-day call. Call (844) 343-6681 for a free estimate and a written timeline.
How do you source the part? We match to your model label and order against it, keeping aftermarket options on the table only when lead time demands it. Every sourced product is documented. Call (844) 343-6681 for a free estimate.
Contact
If you’re building an addition or ADU in Los Angeles and your ECO Window Systems units need to tie in correctly, start with a free written estimate. Call (844) 343-6681 to schedule yours. A live person picks up, any hour. Every price is written before work starts and every project is backed by the 365-Day Done Right Promise. You’ll know the scope, the price and the guarantee in writing before day one. We serve Los Angeles and nearby areas.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












