







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Driveway & Pavers: The Los Angeles Owner’s Guide
We install ECO Window Systems-compatible driveway and paver hardscape components in Los Angeles, and a typical installed driveway project here runs $8,260 – $21,240 for pavers or $5,310 – $14,160 for concrete, depending on square footage and substrate. Braden Remodeling is an independent service provider – we are not affiliated with ECO Window Systems, but we work on the same spec lines their dealers install across Southern California. Most Los Angeles owners find out something’s wrong when a paver edge lifts after a rain, a door-sill threshold starts letting water pool at the driveway apron, or a trip hazard appears where the slab meets the garage floor. That’s when the call comes in.
Key takeaways
- Installed paver driveway cost in Los Angeles: $8,260 – $21,240.
- Installed concrete driveway cost: $5,310 – $14,160.
- We’re independent of ECO Window Systems; the compatibility work and the guarantee are ours.
- Every price is written before any work starts, and the 365-Day Done Right Promise covers the finished work – if it fails inside the year, we return and correct it at no charge.
Which ECO Window Systems Models This Applies To

ECO Window Systems sells door and window systems with exterior threshold and drainage components that tie into a driveway apron and adjacent paver field. When an owner calls us about a “driveway and pavers” part, what they usually mean is one of three things: the threshold or sill detail where a sliding door meets the driveway, the drainage channel or trench drain that runs along that edge, or the paver band that finishes against the house. Model lines vary by series, and the spec that matters is the rough opening and sill height – not just the aisle width.
Here’s the gotcha most owners miss. The threshold profile on an ECO Window Systems slider sits lower than most aftermarket replacement thresholds, so a generic channel drain bought off a shelf often sits too high, and water backs up under the door. You need to measure the sill-to-grade drop, not the track depth. Look for the model label on the door jamb, inside the frame – it will list the series, rough opening, and finish. If the label is painted over or missing, take three measurements: sill height above grade, track depth, and the width of the rough opening.
The OEM-versus-aftermarket call for ECO Window Systems parts is really a spec-compatibility call. OEM gets you the exact profile and finish, but lead times can run weeks. A quality aftermarket equivalent – a machined aluminum threshold or a stamped drainage channel rated for the same sill height – installs in a day and costs less, and for Los Angeles work we’ve found the finish holds up longer under UV and salt air because it’s anodized rather than powder-coated. That’s the trade: exactness versus speed and durability. We’ll show you both, with prices, before you decide.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ECO Window Systems Driveway & Pavers Is Failing
- Water pooling at the threshold after every rain. The drainage channel has dropped, clogged, or the paver band has settled away from the foundation, and water has nowhere to go but back toward the house.
- Paver edges lifting near the door. In Los Angeles, clay-heavy soil plus a summer dry cycle causes the substrate to shrink and swell; a paver installed without a proper base course will heave. If the edge near the slider is five millimeters proud of its neighbor, that’s the pattern.
- Threshold gasket cracking or pulling away. West-facing doors in Los Angeles take hard afternoon UV, and the gasket on the sill plate breaks down in three to five years – not the door itself, just the seal detail.
- Efflorescence – white, chalky staining – on the paver surface. That’s salt migrating out of the concrete or the substrate. It’s often cosmetic, but if it returns after cleaning, the moisture source is under the paver, not the finish.
- A trip-lip where driveway meets garage floor. The drive slab or paver course has settled relative to the slab-on-grade; anything over a quarter inch is a real trip hazard for kids and guests, and it’s a code issue if a permit inspector looks at it.
Replacement Cost & What’s Included

For a Los Angeles driveway and pavers work involving ECO Window Systems-compatible threshold and drainage components, here’s how the numbers break down, installed, parts and labor included:
| Scope | Installed Price Range |
|---|---|
| Paver driveway installation (full field) | $8,260 – $21,240 |
| Concrete driveway installation | $5,310 – $14,160 |
| Driveway replacement (tear-out and re-install) | $5,900 – $16,520 |
| Threshold / drainage channel replacement at the door | Quoted within the ranges above |
| Driveway sealing (single application) | $295 – $825 |
What drives the price up: square footage, whether the existing substrate must be removed, the paver pattern (running bond is simplest; herringbone and ashlar cost more in labor), and access – a narrow Los Angeles hillside drive with no dumpster access costs more than a flat cul-de-sac lot. What we include in every written price: substrate prep and compaction, base course, edge restraint, threshold detail tied to the ECO Window Systems door, final grading, and cleanup with all debris hauled away. The 365-Day Done Right Promise covers the installed work for a full year – if a paver heaves or the threshold detail leaks inside that window, we return and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
An owner can safely check the threshold gasket, clear a clogged drainage channel with a shop vac and a garden hose, and photograph the model label. That’s diagnostic work – no tools that can hurt you. But installing a threshold profile or a paver field is not a homeowner job. Getting the sill height wrong by a quarter inch means the ECO Window Systems slider leaks under every storm for years, and a paver set on a bad base will heave the first summer. The substrate is the work, not the pavers – and nobody sees it until it fails.
There’s no electrical or gas risk on this part, so it’s not the kind of thing that will shock you. But the cost of a botched install shows up slowly: a settled edge that reopens every year, water behind the wall, a trip hazard escalating from a nuisance to a claims issue. We’d rather you call at the symptom stage than after two seasons of patching. We install with documented, warrantied products – Belgard for pavers, and our broader spec sheet runs KraftMaid, Cambria, and Silestone on the interior work we do alongside. Every price is written before a tool comes out, and our technicians have up to 22 years of experience. Call (844) 343-6681 to schedule a free estimate.
FAQs

A properly installed paver driveway should give you 25 – 30 years in Southern California, and the threshold gasket tied to the ECO Window Systems slider is the shorter-lived piece: 3 – 5 years under west-facing afternoon UV. The pavers themselves outlast the gasket by a decade; keep a spare box of matching pavers for repairs. Call (844) 343-6681 for an exact quote – estimates are free.
Often yes. If the drainage channel is intact and the paver band has only settled, we can lift the edge course, recompact the base, and re-set with the existing materials – that runs a fraction of a full replacement. If the substrate is gone, though, a repair is temporary and honest replacement is the better spend. We’ll tell you which one you’re looking at after walking the site. Call (844) 343-6681 to arrange the walk-through.
A threshold and drainage detail swap is a one-day job for a single door; a full paver driveway runs 3 – 6 working days depending on square footage and whether the old surface has to be torn out. Concrete needs cure time added – typically 48 hours before foot traffic and a week before vehicles. Every stage is on the written schedule before we start. Call (844) 343-6681 to get a firm timeline for your Los Angeles property.
We work from the model label and measurements, not guesses – you give us the series and rough opening, we spec the OEM profile or a verified aftermarket equivalent and put both prices in writing. Because we’re independent of ECO Window Systems, we’re not locked to one supplier, which usually means faster delivery and a real choice on spec. KraftMaid, Cambria, and Silestone on the interior side follow the same rule: documented product, written spec, no guessing. Call (844) 343-6681 – live person, any hour.
Get the Parts and Installation Squared Away
Whether your Los Angeles home needs a threshold detail corrected after a failed rain test or a full paver driveway that ties cleanly into your ECO Window Systems slider, the work starts with a written price and ends with a signed guarantee in your hand. That’s The Garrison Standard – no numbers moving at the door, a clean site at close, and the 365-Day Done Right Promise standing behind the finished job for a full year. Call (844) 343-6681 for your free estimate. A live person answers, 24/7.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












