







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Driveway & Pavers: The Los Angeles Owner’s Guide
We install ES Windows-compatible driveway and paver systems for Los Angeles homeowners, and the installed price typically lands between $8,260 and $21,240 for a paver driveway, with concrete coming in at $5,310 to $14,160. Most owners discover the failure long before they look up a part: water starts pooling against the threshold instead of draining off the slab, pavers in the ES Windows driveway assembly shift or rock underfoot, or the pavement just past the door settles and leaves a lip that catches the door sweep. By the time the door drags or the garage floods after a storm, the driveway surface and its base have usually been moving for a season or two. We serve Los Angeles and quote every job in writing before work starts.
Which ES Windows Models This Applies To

ES Windows is a Southern California manufacturer, and its exterior door and window lines are the ones that meet driveway and paver assemblies in real homes. The compatibility question usually isn’t the driveway itself – it’s the threshold detail. ES Windows door systems sit at specific sill heights and rough-opening dimensions, and the paver or concrete surface has to land at the right finished elevation to meet that sill without bridging the weep path. Get that elevation wrong and you’re back to water intrusion within a season.
To identify what you have, pull the label on the frame or glass edge (ES Windows stamps series and size data there), then measure the rough opening and the existing sill height. Those three facts determine how the new driveway surface meets the door.
On OEM versus aftermarket: for the pavement assembly itself, there’s no ES Windows-branded paver to match. The door is the ES Windows part; the driveway and pavers are the field-built assembly that has to interface with it. That means you choose the paver (Belgard, Unilock, and similar documented brands) based on base, drainage, and elevation – not on a model number. Where an ES Windows threshold or sill component is genuinely worn, we source that specific part rather than improvising a field fix. We also handle KraftMaid, Cambria, and Silestone on the interior side of the same homes.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Driveway & Pavers Is Failing
Los Angeles doesn’t get much rain, but when it comes, it comes hard and fast onto clay-heavy soils that don’t absorb quickly. That combination exposes a bad driveway-to-door transition faster than most climates do. Here’s what we see:
- Water pooling at the ES Windows threshold. The driveway surface has settled or the slope has flattened, so runoff sits against the sill instead of draining away. This is the number one cause of door-frame rot we find in Los Angeles.
- Pavers rocking or lifting near the door. Base compaction failed or the bedding sand washed out. Once pavers move, the edge restraint is usually compromised too.
- A lip or step-down at the door. The slab or paver field dropped relative to the ES Windows sill, creating a trip hazard and a gap that lets water and pests in under the door sweep.
- Efflorescence and white staining on pavers. Moisture is trapped in the base and pushing salts to the surface – a sign the drainage plane isn’t working.
- Cracks radiating from the door corner. Point loading and soil movement are stressing the slab or paver field right where the ES Windows assembly transfers weight to the ground.
Any one of these is worth a look. Two or more together usually means the base needs rebuilding, not a cosmetic patch.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Everything below is installed – materials and labor together, quoted in writing before we start. These are the ranges we work to in Los Angeles:
- Paver driveway installation: $8,260 – $21,240
- Concrete driveway installation: $5,310 – $14,160
- Asphalt driveway paving: $4,130 – $10,620
- Driveway replacement: $5,900 – $16,520
- Paver patio installation: $4,130 – $12,980
- Driveway sealing: $295 – $825
What drives the range: square footage, how much base has to be excavated and recompacted, whether the ES Windows threshold elevation has to be reworked, and the paver line you choose. Drainage correction adds labor because it’s the part that’s invisible when it’s done and obvious when it’s skipped.
The price we quote is the price you pay. No number moves at the door. Every completed job carries the 365-Day Done Right Promise: if the work fails within that year, we come back and correct it at no charge.
DIY or Call Us?
Some things you can safely check yourself. Walk the paver field and note which stones rock. Pour a bucket of water at the ES Windows threshold and watch where it goes – if it runs toward the door, the slope is wrong. Look for efflorescence and cracks. None of that is risky.
What we’d steer you away from doing yourself is rebuilding the base and re-setting the elevation at the door. That work looks simple and isn’t. Get the compaction or the finished slope wrong and you’re re-exposing the ES Windows sill to the exact water intrusion that caused the failure. That’s how a weekend project turns into a rotted frame and a bigger bill. The base, the drainage plane, and the sill interface are where experience earns its keep.
Call (844) 343-6681 for a free estimate. We’ll walk the site with you, tell you straight whether you need a rebuild or a repair, and put the number in writing.
FAQs

How long do pavers and driveways last in Los Angeles? A properly built paver driveway with a compacted base typically lasts 25 to 30 years in Los Angeles conditions; concrete slabs run 20 to 30 years before major cracking. The difference is base preparation and drainage, not the surface material.
Can it be repaired instead of replaced? Often yes. If only a section of pavers has settled, we can lift, recompact the base, and re-set that area rather than replacing the whole field. Full replacement makes sense when the base has failed broadly or cracks run through the slab. Call (844) 343-6681 and we’ll tell you which one you’re looking at – estimates are free.
How long does the job take? A section repair is usually a day or two. A full paver driveway in Los Angeles typically runs three to seven days depending on square footage, base work, and material cure times. You get the schedule in writing with the price.
How do you source the parts? The pavement work uses documented brands like Belgard and Unilock, which carry manufacturer specs and warranties that back our own guarantee. Where an ES Windows threshold or sill component needs replacing, we source that specific part to match your series rather than improvising. We don’t hold parts in stock and don’t carry them on a truck – every job is planned around your actual measurements.
We’re an independent service provider, not affiliated with ES Windows. Calls are answered by a live person, 24/7, and our technicians have up to 22 years of experience.
Call (844) 343-6681 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












