







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Windows & Doors: The Los Angeles Owner’s Guide
We install and service ES Windows-compatible windows and doors across Los Angeles, with installed window and door replacements typically running $5,310 – $17,700 and impact-rated units at $9,440 – $29,500. If you own an ES Windows product and a unit has failed or is headed that way, you’ve most likely noticed it at the source: a foggy sealed glass unit on a west-facing window, a sliding door that drags or won’t lock on a June afternoon, or a draft that shows up every time the Santa Ana winds push through the San Gabriel Valley. This page is built for that specific owner, not the generic “call for a quote” crowd. Bradford Remodeling Co Los Angeles is an independent service provider and is not affiliated with ES Windows.
- What we do: source ES Windows-compatible components, verify fit against your existing model, and install with The Garrison Standard behind the work.
- What it costs: written, line-item pricing before any tool comes out.
- What backs it: the 365-Day Done Right Promise, in writing.
Which ES Windows Models This Applies To

ES Windows built a lot of product for Southern California homes – horizontal sliders, single-hung, casement, fixed picture units, and the patio door line most Los Angeles homeowners end up calling us about. Compatibility depends on three things: the frame series, the glass unit dimensions, and the hardware if a sash or roller is involved.
The single fastest way to identify your unit is the tempered-glass etching in the corner of the pane (the safety glazing label) combined with the manufacturer’s sticker typically found on the head jamb or the outside face of the frame. Measure the visible glass and the frame opening separately – they are not the same number, and a quote built off the wrong one lands the wrong part on your doorstep. The other model-specific gotcha is glazing bead style: ES Windows used both a snap-in and a wedge-gasket style across different production runs, and the two are not interchangeable.
On the OEM-vs-aftermarket question: for the glass unit itself, a quality aftermarket insulated sealed unit matched to the correct spacer and thickness is what we install most often, because the glass is the glass and the seal is the seal. For hardware – rollers, locks, hinges – we source genuine or OEM-equivalent parts that match the existing cutouts so you’re not drilling new holes in a frame that’s still solid. We don’t stock parts and we don’t carry them on a truck; every part is sourced for your specific unit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Windows & Doors Is Failing
Los Angeles weather is hard on windows in a specific way. It’s not cold – it’s the UV load and the thermal cycling through summer afternoons that cooks seals and warps tracks. Here’s what failure looks like:
- Fogging or condensation between panes. That’s a failed sealed glass unit (the double-pane sandwich has let moisture in). It’s not a cleaning issue, and no amount of wiping the inside of the glass will fix it.
- Sliding door that drags, jumps, or sticks. Almost always a worn-out roller or a bent track. In Los Angeles homes near the coast, corrosion accelerates this faster than inland owners expect.
- Draft or whistle at the perimeter. Failed weatherstrip, a displaced glazing bead, or a frame that’s shifted. On a west-facing wall, this typically shows up in the hottest months.
- Lock or latch won’t engage. Misaligned sash or a worn strike. This is worth fixing fast – a patio door that won’t lock is a security problem.
- Water staining on the interior sill. The most serious one. It usually means a failed seal or a failed flash at the frame, and it needs to be looked at directly, not diagnosed over the phone.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed window and door replacement in Los Angeles runs $5,310 – $17,700 for standard units and $9,440 – $29,500 for impact-rated windows. The range is driven by three things: size and number of units, glass specification (tempered, impact, low-E), and the condition of the existing frame – an intact frame means a cleaner swap; a rotted or shifted frame means more work behind the wall.
What’s in the number: the part itself, labor to remove and install, sealing and flashing, and site cleanup. What’s written on the page before we start – every line item, no numbers that move at the door. Every completed install carries the 365-Day Done Right Promise: if the work fails within one year, we come back and correct it at no charge. We work with a documented roster of name-brand materials, including KraftMaid, Cambria, and Silestone for the interior side of a remodel, so specs are traceable, not guessed at.
DIY or Call Us?
Here’s the honest split. You can safely check and photograph the glazing label, measure your visible glass, confirm the lock is catching, and clear obvious debris from a track. What you should not do is pull a sealed glass unit out of a frame and try to reseal it (the seal is factory-made under pressure, and a field repair will fog again within a season), or drill new hardware cutouts in an old frame, or try to re-flash a leaking perimeter from the outside.
Patio doors and any work involving a failing perimeter seal are worth having a trained installer look at. Call (844) 343-6681 for a free estimate. A live person answers the phone, not a voicemail queue.
FAQs

How long should an ES Windows unit last in Los Angeles? A well-built sealed glass unit typically lasts 15 to 25 years, but Los Angeles homes with west or south exposure to strong UV and daily thermal cycling often see fogging earlier – sometimes in the 10 to 15 year range. Hardware like rollers and locks wear faster, often in 5 to 10 years with regular use.
Can the glass be repaired instead of replaced? No – a fogged sealed glass unit cannot be repaired in place. The sealed unit has failed, and the fix is replacing the glass unit. That’s typically the lower-cost option versus a full window replacement, and it’s the one we quote first when the frame is sound. Call (844) 343-6681 for an exact quote – estimates are free.
How long does the swap take? A single glass unit or a set of patio door rollers is typically a few hours on site. A full window or door replacement runs longer, depending on how many units and whether the frame is being replaced. We give you a schedule in writing before we start.
How do you source the part for my ES Windows model? We verify the model from the glazing label and frame sticker, confirm the glazing bead style, and source a compatible unit or OEM-equivalent hardware matched to your existing frame. Parts are sourced per job – we don’t stock and we don’t carry them on a truck. Every part is confirmed against your unit before it’s ordered.
Ready to find out what’s actually wrong and what it costs? Bradford Remodeling Co Los Angeles is part of the Garrison Partners family (established 2004), independently owned and operated, and held to The Garrison Standard on every job – written price before work starts, background-checked and uniformed technicians, and the 365-Day Done Right Promise behind the finished work.
Call (844) 343-6681 to schedule your free estimate. A live person answers 24/7.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












