A Bradford company - serving Los Angeles, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
C
CWS · Los Angeles

CWS Bathroom Remodeling in Los Angeles, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Los Angeles
A powder room with botanical wallpaper and a stone sink
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A finished basement family room with a media wall and wet bar
A walk-in pantry with wood shelving
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CWS Bathroom Remodeling: The Los Angeles Owner’s Guide

A CWS bathroom remodel in Los Angeles typically runs $10,620 to $33,040 installed, depending on whether you’re updating fixtures and finishes or moving the rough-in. To be clear about who we are: Bradford Remodeling Co Los Angeles is an independent contractor, not affiliated with CWS. We work on CWS toilets, vanities, tub and shower systems daily.

Call (844) 343-6681

Owners usually call us the same way. A CWS one-piece toilet starts weeping at the base after a decade of Los Angeles hard water. A CWS vanity top chips at the front edge from years of leaning. Or a CWS tub-to-shower conversion from a past remodel starts flexing underfoot because the pan was set over a soft subfloor. The pattern is the same: a fixture that was fine for years now leaks, rocks, cracks, or refuses to drain. What you want is someone who knows the CWS line, can match the correct replacement part, and can install it correctly the first time. That’s the whole job.

Key Takeaways

  • Installed CWS bathroom remodel pricing in Los Angeles: $10,620 to $33,040. Small bath projects start at $5,900.
  • CWS parts are matched by series, not just by “fits a bathroom.” Measuring the rough-in and inspecting the label matters.
  • Los Angeles water (hard, mineral-heavy in many neighborhoods) is why trim, valves, and seals fail faster here than the manufacturer rates.
  • We give you a written price before any work starts. Every completed project carries the 365-Day Done Right Promise.

Which CWS Models This Applies To

A tile setter installing wall tile in a shower

CWS builds bathroom products across several lines – toilets, vanities, tub-shower surrounds, and shower systems – and the parts don’t cross over freely between them. The fill valve and flush valve in a CWS two-piece toilet are sized to a specific tank height. The shower pan drain and rough-in vary by surround series. A vanity top is measured by width, depth, and the position of the faucet hole – get any one of those off by a quarter inch and it doesn’t fit the cabinet or the plumbing.

How to identify what you have: read the label inside the toilet tank lid or on the back of the tank, and for vanities, measure the cabinet box width and the distance from the back wall to the faucet supply lines. Take a photo of the label. That single picture saves a return trip.

The OEM-versus-aftermarket decision matters more on CWS than on some brands. CWS factory valves and trim are matched to the casting, so an OEM seat or flush kit seats cleanly. A quality aftermarket fill valve – Fluidmaster and Korky both make compatible kits – will work in most CWS tanks if it’s the right height, and costs less. Where we steer owners toward OEM: shower pans, surrounds, and anything structural. A trim ring is a safe aftermarket call. A pan isn’t.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CWS Bathroom Remodeling Is Failing

  • Water pooling at the toilet base. That’s a failed wax ring or a hairline crack at the flange, not a loose bolt. A warped flange under a Los Angeles slab floor is common after 15-plus years and needs the flange reseated, not just a new wax ring.
  • Vanity top turning cloudy or chipping at the edge. Hard water etches solid-surface and cultured marble over time; chips at the front edge usually follow. A CWS vanity replacement here means $945 to $3,540 installed.
  • Shower pan flexing or a soft spot underfoot. The pan was set over a subfloor that wasn’t dry or was too thin. Left alone, it cracks, and that crack is a slow leak into the floor below.
  • Mildew returning within weeks of cleaning. This isn’t a cleaning problem. It’s a failed caulk bead or missing backer behind the surround. Los Angeles bathroom humidity trapped in a wall cavity brings it back fast.
  • Drain that backs up even after snaking. A CWS shower drain tied to a remodel-era P-trap can sag or hold soap scum far from the visible drain. The fix is below the pan, not at the surface.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A wide opening with a new beam where the kitchen wall was removed

Here are the installed price ranges for CWS-compatible bathroom work in Los Angeles. These are real numbers, not “call for a quote.”

Project Installed Price Range (Los Angeles)
Full Bathroom Remodel $10,620 – $33,040
Small Bathroom Remodel $5,900 – $14,160
Walk-In Shower Installation $5,310 – $14,160
Tub-to-Shower Conversion $4,130 – $11,800
Shower Replacement $3,540 – $10,030
Bathroom Vanity Installation $945 – $3,540

What drives the range on a CWS bathroom project: whether the rough-in stays put (cheaper) or moves (a new drain line and supply lines add cost), whether the subfloor needs repair, and whether you’re matching an existing fixture or installing new. Parts and labor are itemized separately in the written price you get before any work starts. No hidden fees. Every completed project carries the 365-Day Done Right Promise – if the work fails inside that year, we come back and correct it at no charge.

DIY or Call Us?

Some CWS part swaps are safe and honestly doable. Replacing a toilet fill valve or flapper is a fifteen-minute job with a shutoff valve and a sponge. Swapping a vanity faucet or a showerhead is fine too. Those are the “check it yourself” jobs.

Where DIY goes wrong: anything involving the drain line or the subfloor. A shower pan reset, a tub-to-shower conversion, or a toilet flange reseat means opening the floor or the wall, confirming the rough-in is solid, and knowing whether the water damage is dried out. Get it wrong and you’re looking at a slow leak into the floor below – the kind that doesn’t show up for weeks. Don’t cut into a pan or pull a surround because a tutorial said it was easy. Call us at (844) 343-6681 and we’ll tell you straight whether it’s a swap or a rebuild.

FAQs

A small remodeled galley kitchen with cabinets to the ceiling

How long does a CWS toilet valve or shower trim last in Los Angeles? About 5 to 8 years for a fill valve on Los Angeles city water, which is hard enough to scale up the valve seat faster than manufacturers rate it. Shower trim and seals typically show wear at the 7-year mark.

Can I repair my CWS fixture instead of replacing it? Often, yes. A failed toilet fill valve, a leaking shower valve, or a warped vanity top can usually be repaired for a fraction of replacement cost. Once the subfloor, the pan, or the flange fails, replacement is the better call. Call (844) 343-6681 and we’ll give you a straight answer either way.

How long does a toilet or vanity swap take? A CWS vanity installation is typically a half-day to a full day depending on whether the old top comes off cleanly. A full bathroom remodel runs one to three weeks. Either way, you get a written timeline before tools come out.

How do you source the right CWS part? We match against the model number from the tank label or the cabinet box – not just “it’s a bathroom fixture” – because CWS parts across series aren’t interchangeable. We work with a documented roster of premium brands including KraftMaid, Cambria, and Silestone, so specifications are traceable and backed by manufacturer warranty.

Will the price change once work starts? No. You get a written price before any work begins – that’s The Garrison Standard, and it’s non-negotiable. If we find something hidden in the wall during a Los Angeles job, we stop and quote it before we touch it, in writing.

Bradford Remodeling Co Los Angeles is an independently owned member of the Garrison Partners family, held to The Garrison Standard. Live person answers the phone 24/7. Background-checked, uniformed technicians on every job. Our technicians have up to 22 years of experience.

Call (844) 343-6681 to schedule your free estimate. You’ll get a written price for your CWS bathroom project before any tools come out – a real number, not a callback. Ask us anything about the CWS line; if we can’t source the part, we’ll tell you before you pay for a visit.

Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled family room with new windows and a window seatA built-in window seat in a bay windowA dining nook with a built-in banquetteA home office with a built-in desk and shelvesA remodeled kitchen with a waterfall island and wood cabinetsAn open living space after a whole-home remodel

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Los Angeles

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Los Angeles team

A local vetted partner works across Los Angeles and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 343-6681
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Bradford Remodeling Co Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch