A Bradford company - serving Los Angeles, CA
An open living room and dining area after a whole-home remodel
CGI · Los Angeles

CGI Driveway & Pavers in Los Angeles, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Los Angeles
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
An open living space after a whole-home remodel
A single-story rear room addition with tall windows and a new patio
An open kitchen and dining area after a remodel
A freestanding soaking tub in a remodeled primary bathroom
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Driveway & Pavers: The Los Angeles Owner’s Guide

Replacing a failing CGI driveway or paver section in Los Angeles typically runs $8,260 to $21,240 for a full paver driveway installation, with smaller section repairs landing well below that; concrete driveway work runs $5,310 to $14,160 and driveway sealing sits at $295 to $825. Most owners don’t call us until the symptom is impossible to ignore: a paver lifts after a rain and wobbles underfoot, a hairline crack in the CGI driveway slab spreads through a full Los Angeles summer, or the joint sand washes out for the third time and the base starts shifting under the car. We install CGI-compatible driveways and paver systems, and we give you a written price before any work starts.

Call (844) 343-6681

Which CGI Models This Applies To

A finished basement family room with a media wall and wet bar

CGI covers two families of product, and the right approach depends entirely on which you have. Their concrete driveway systems are poured or precast slabs finished with a stamped, stained, or exposed-aggregate surface; their paver lines are interlocking units laid over a compacted base. Spring Valley and Valwood are the two CGI paver profiles we see most often on Los Angeles properties, and each carries its own nominal thickness and joint spec. Interlocking pavers used on driveways usually need a base two to three times thicker than a walkway base, and if a previous install skipped that, no amount of re-sanding will hold it.

Identify your system before pricing anything. Pull a paver from a corner or expansion edge and measure its thickness and face dimensions. On poured CGI concrete, find the original finish stamp or the contractor’s expansion joint layout. Where no label survives, a square-foot takeoff and a base-depth probe tell us what we’re actually working with. Because driveways get abused by vehicles while patios don’t, the base and edge restraint specs are the whole job.

On the OEM-versus-aftermarket question: for CGI paver systems, OEM units matter when you’re patching a small area and want the finish, thickness, and interlock pattern to match the existing field. For a full replacement, a documented, spec-matched paver from a manufacturer with published warranty terms (Belgard and Unilock sit in our approved brand roster) performs identically and often costs less. We tell you which path makes sense once we’ve seen the site.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Driveway & Pavers Is Failing

Los Angeles driveways fail differently than driveways in wet climates. Our dry summers and brief heavy rain events put a specific kind of stress on both concrete and pavers, and the first warning usually shows up before the surface breaks apart.

  • Pavers that rock or lift after rain. Water is getting under the unit and washing out the bedding sand. That points to a failed base or poor drainage, not just loose pavers.
  • Hairline cracks spreading across a CGI concrete slab. In Los Angeles heat, slab shrinkage and missing control joints open cracks that widen with each temperature swing. Cracks wider than a credit card usually mean the slab is moving.
  • Joint sand washing out repeatedly. If you’re re-sanding the same area every season, the base isn’t draining or the edge restraint has let go. Re-sanding without fixing the cause is a short-term patch.
  • Sunken or heaved sections. A dip along a driveway edge or a paver popping up in a cluster signals a base failure or root intrusion underneath. Driveway load capacity is the spec that failed, not the paver itself.
  • Stains and surface spalling on the concrete. Oil, salt, and irrigation runoff eat into a stamped CGI surface over time. If the top layer is flaking, the finish coat has gone past what cleaning can fix.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled hall bathroom with subway tile and a floating vanity

Here are honest installed ranges for Los Angeles, all written into your quote before we start. The range moves based on square footage, base depth, access, and the finish you choose, and we tell you exactly where your job lands.

Scope Installed Range
Paver driveway installation $8,260 – $21,240
Concrete driveway installation $5,310 – $14,160
Driveway replacement $5,900 – $16,520
Asphalt driveway paving $4,130 – $10,620
Driveway sealing $295 – $825
Paver patio installation $4,130 – $12,980

Every quote breaks out materials, base prep, edge restraint, and labor as separate line items so you can see what you’re paying for. The final number doesn’t move at the door. That written price is the Garrison Standard, and it’s non-negotiable on every job.

Every driveway and paver project we complete carries the 365-Day Done Right Promise: a full-year written guarantee. If the work fails inside that window, we come back and correct it at no charge. You hold the signed guarantee at job close, along with a clean site and a documented scope.

DIY or Call Us?

Some checks are safe to do yourself. Pull a loose paver, probe base depth with a screwdriver or rebar, and photograph cracks. That information helps us give you a real number instead of a guess.

Installing or replacing a driveway is not a safe DIY job. A paver driveway carries thousands of pounds of vehicle load and has to be compacted on a properly graded base. A CGI concrete slab needs correct joint layout and cure time, and in Los Angeles heat a pour that cures too fast cracks. Bad base prep, a miscalculated slope, or shallow compaction doesn’t fail today. It fails in a year, and it fails with your car on it. This is the part of the job that separates a driveway that holds from one that rocks by the next rainy season.

Call Bradford Remodeling Co Los Angeles at (844) 343-6681 for a free estimate, and we’ll walk the driveway, find the real cause, and give you a written price.

FAQs

A garage converted into a guest room and home office

How long does a CGI paver driveway last in Los Angeles? A properly installed CGI paver driveway typically lasts 25 to 30 years in Los Angeles, and often longer with resealing every three to five years. The lifespan hinges on base compaction and edge restraint, not the paver surface. Call (844) 343-6681 for an evaluation of your existing driveway.

Can a failing CGI driveway be repaired instead of replaced? Yes, in many cases. Cracks, sunken sections, and loose pavers can often be repaired by pulling back the affected area, rebuilding the base, and resetting the units. Full replacement makes more sense when damage covers a large portion of the driveway or the base has failed throughout. Call (844) 343-6681 and we’ll tell you honestly which one your driveway needs.

How long does it take to replace a CGI driveway? Most residential paver driveway replacements in Los Angeles take three to five working days, and concrete installations take five to seven days including cure time. Larger driveways or jobs with heavy base work take longer, and we’ll give you the timeline in writing. Call (844) 343-6681 to schedule your free estimate.

How do you source the right CGI-compatible pavers? We match pavers by profile, thickness, finish, and interlock pattern against the existing field, then source from documented manufacturers with published specs and warranties, including Belgard and Unilock in our approved brand roster. That traceability matters when we stand behind the work with the 365-Day Done Right Promise. Call (844) 343-6681 and we’ll show you the options.

Bradford Remodeling Co Los Angeles is an independent service provider and is not affiliated with CGI. We work with a documented roster of name-brand materials beyond hardscaping, including KraftMaid, Cambria, and Silestone, so specifications stay traceable on any project. Our technicians have up to 22 years of experience, and every project gets a written price before any work starts.

Call (844) 343-6681 for a free estimate. We walk the site, identify what failed, and put the price in writing before a single tool comes out.

Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A finished backyard cottage with a small covered porchA walk-in shower with large-format tile and a built-in nicheA wide opening with a new beam where the kitchen wall was removedA stone counter, tile backsplash and open shelf after a kitchen remodelNew painted shaker cabinets with an organized deep drawerA remodeled hall bathroom with patterned floor tile and painted walls

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Los Angeles

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Los Angeles team

A local vetted partner works across Los Angeles and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 343-6681
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Bradford Remodeling Co Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch