







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Kitchen Remodeling: The Los Angeles Owner’s Guide
We install and repair CGI-compatible kitchen systems across Los Angeles, and a full kitchen remodeling scope with CGI components typically runs $16,520 – $53,100 installed, depending on cabinet run, counter surface, and whether the rough-in changes. A single-part replacement (a failed hinge, drawer glide, or cabinet box) is a smaller job, and we can usually schedule the assessment within a few business days.
Most Los Angeles owners find out something is wrong the same way: a soft-close drawer that slams, a cabinet door that hangs crooked and won’t adjust back, or a counter seam that has started to lift after a summer of dry heat. CGI kitchen products are a common specification in local condos and mid-century rehabs, and their failure points are specific enough that a general handyman often misdiagnoses them.
Which CGI Models This Applies To

CGI cabinetry and kitchen systems show up under several model families, and matching the correct part means matching three things: the series line, the box dimension, and the hardware generation. The model label is usually a small sticker on the inside face of the cabinet box, on the underside of an upper, or on the back panel of a drawer box. Read the whole string, not just the first line; the suffix after the dash tells you the hardware generation, and that’s where most mismatches happen.
Measure the existing part before you order. Hinge cup bore, drawer glide length, and box depth all vary within the same CGI family, and a glide that looks identical on a spec sheet can sit 3mm off the mounting pattern. OEM parts are the safe match but carry a longer lead time and a higher price. Quality aftermarket equivalents exist for the common glides and hinges and are dimensionally correct, but they will not match the CGI finish color on exposed hardware. For that, we source OEM.
To confirm compatibility, send us a photo of the label and a tape measure across the failed part. We cross-reference against CGI’s published specs and confirm the part before anything is ordered. We are an independent service provider and not affiliated with CGI; we install and repair CGI-compatible products as a licensed contractor.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Kitchen Remodeling Is Failing
These are the five symptoms that send Los Angeles homeowners to us most often. Each one points at a specific failure, and the fix is different for each:
- Drawer glides that jump or bind mid-travel. Usually a worn nylon roller or a bent glide rail, not a drawer problem. The glide needs replacement, not adjustment, and forcing it back into the track bends the mounting bracket.
- Soft-close doors that slam shut. The damper cartridge inside the hinge has lost its seal. This is a hinge swap, and the cabinet box itself is almost always fine.
- Doors that won’t stay adjusted and drift out of plumb. The hinge plate screws have stripped the screw holes in the box face. Common in older CGI boxes after a few door swaps; the repair is a screw-hole insert, not a new door.
- Counter seams lifting or showing a hairline gap. Los Angeles dry heat plus a hot dishwasher cycle expands the substrate and pulls the seam. Left alone, water gets in and the seam gets worse.
- Cabinet box separation at the joints. Glue failure at the dado joint, usually after a moisture event or a heavy load in an upper. The box can often be re-clamped and re-glued rather than replaced.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing for Los Angeles kitchens with CGI-compatible components:
| Scope | Installed Range (Los Angeles) |
|---|---|
| Full kitchen remodel | $16,520 – $53,100 |
| Small kitchen remodel | $10,620 – $23,600 |
| Cabinet installation | $4,720 – $15,340 |
| Countertop installation | $2,360 – $7,670 |
| Backsplash installation | $945 – $2,950 |
| Kitchen island installation | $3,540 – $11,800 |
What drives the range: the cabinet run length, whether the rough-in moves (electrical, plumbing, venting), the counter surface chosen, and whether the failed part is a hardware swap or a full box replacement. Hardware-only repairs sit at the bottom of the range; a full cabinet box swap on a CGI system sits in the middle; a scope that touches layout or surfaces lands in the upper half.
Every job gets a written price before a tool comes out, and the price does not move at the door. Every completed project carries the 365-Day Done Right Promise: if the work fails within the year, we come back and correct it at no charge.
DIY or Call Us?
You can safely check the model label, photograph it, measure the failed part, and confirm the part number with us. You can swap a drawer glide or a damper hinge on a CGI box yourself if the mounting pattern matches, and that’s a reasonable Saturday job for a careful homeowner.
What goes wrong for DIY: stripped screw holes in the cabinet box face (easy to make worse), mismatched hardware that binds after a week, counter seam repairs that crack the substrate, and re-gluing a separated box without proper clamping pressure. On CGI cabinets, we often find the previous owner already tried one of these and left the box in worse shape.
If the failed part is a counter seam, box joint, or anything that touches plumbing or electrical, stop and call us. Call (844) 343-6681 to schedule your free estimate; we answer live, 24/7.
FAQs

How long does CGI kitchen hardware last? Soft-close hinges and drawer glides on CGI systems typically hold up 7 to 10 years under normal kitchen use, and less in Los Angeles where dry summer heat dries out the damper fluid and shortens damper life. Hinge plate screws strip before the hinge itself fails. Call (844) 343-6681 for an exact quote – estimates are free.
Can the failed part be repaired instead of replaced? Sometimes. Stripped hinge screw holes, separated box joints, and minor counter seams can often be repaired rather than replaced, and we’ll tell you which path is actually cheaper once we’ve seen it. If the damper or glide roller is worn, replacement is the only reliable fix. Call (844) 343-6681 to schedule a free assessment.
How long does the swap take? A single hinge or glide swap is a 30 – 60 minute job. A full cabinet box replacement is typically a half-day to full-day job depending on rough-in. Counter seam repair usually takes one visit plus a cure window. Call (844) 343-6681 for a firm timeline on your scope.
How do you source the CGI part? We cross-reference the label and measurements against CGI’s published specs, confirm the part with you before ordering, and source OEM for anything in an exposed finish. We don’t claim to stock CGI parts or carry them on a truck; we order what matches your system. We also work with KraftMaid, Cambria, and Silestone when a scope crosses over to those brands. Call (844) 343-6681 to confirm your CGI part.
If a CGI part in your Los Angeles kitchen has failed, call (844) 343-6681 to schedule your free estimate. Every price is in writing before any work starts, and the 365-Day Done Right Promise is on every completed job. We’re a Garrison Partners member and we answer the phone with a live person, day or night.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












