







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Fence Installation: The Los Angeles Owner’s Guide
PGT fence installation in Los Angeles runs $4,130 to $10,620 installed, depending on what we’re replacing, the grade the fence runs over, and how much of the assembly has failed. We quote the full scope in writing before any work starts, and we can usually get a crew out to look at a failing run within a few days – not same-day, because a real fence installation isn’t a same-day job. Most Los Angeles owners find out something’s wrong the same way: a gate that used to swing true now drags, posts lean after a wet winter, or a section of fence starts pulling away from the run at a corner. When it gets to that point, the problem is rarely just the pickets – it’s usually how the fence was set and what the PGT system was standing on.
Which PGT Models This Applies To

PGT makes fencing systems and fence-related building products alongside its windows and doors, and the systems get installed in different configurations across greater Los Angeles – from pool-enclosing runs to property-line privacy fences to coastal-side runs that take a lot of wind. The catch most owners hit is that PGT fencing components are not universal. Post spacing, panel sizing, and the gate hardware differ between PGT product lines, and a run built with one PGT configuration will not accept parts from another without modification.
The reliable way to identify what you have is to measure the existing posts, count the spacing between them, and check the inside face of any surviving post strap or panel tag for a PGT label with a model reference before you go looking for a matching component. If no label survives, the measurements are what matters more than a nameplate – a good installer can match a system from the on-site dimensions.
OEM versus aftermarket for PGT comes down to whether the part you’re replacing is structural or cosmetic. Structural pieces – post bases, rail brackets, gate frames – should be matched OEM or to a steel equivalent rated for the same load. Pickets, caps, and trim can go either way. We’re an independent Los Angeles service provider and not affiliated with PGT, so we don’t sell you a branded part for the sake of the brand – we match the spec, and we put that choice in writing before the work begins.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Fence Installation Is Failing
- Posts leaning or rocking at the base. This is almost always a footing problem, not a post problem – the post was set in soil without enough concrete depth or the wrong footing for Los Angeles’ expansive clay. Replacing the post without fixing the footing reproduces the failure within a season or two.
- Gate dragging or not latching. A gate that stopped swinging true usually means a hinge or post base has moved, not that the gate itself is bent. On PGT systems with adjustable hardware, the fix is realignment – on fixed-hardware lines, it’s a hardware swap.
- Rails separating from posts or pulling loose. Rail brackets and fasteners loosening over time, often from our thermal swing between cool nights and hot afternoons, which works fasteners loose on any fence run if they weren’t torqued to spec.
- Cracked or split panels and pickets. On any wood or composite component, this is UV and dry-cycle fatigue – Los Angeles’ low summer humidity and strong sun take a toll that a fence install in a wetter climate never sees.
- Rust bleeding at joints and fasteners. Coastal moisture drives this. If the fasteners and brackets are rusting at the same rate, the fence was installed with the wrong hardware for the exposure zone.
Replacement Cost & What’s Included

PGT fence installation in Los Angeles runs $4,130 to $10,620 installed for a standard residential run. That range covers the spectrum from repairing a section to a full re-set. What moves the number:
- Linear feet. Roughly the largest single driver – a 40-foot run and a 120-foot run aren’t the same job.
- Footing work. If the existing footings failed, we set new posts in concrete to code depth. That’s the single biggest variable in our higher-end quotes.
- Grade and access. A sloped run or a tight side yard takes more labor than a flat, wide-open one.
- Gates. Each gate is priced as its own assembly, with its own hardware.
- Material. Vinyl, aluminum, composite, and wood each carry different material costs.
Every quote is line-itemed – parts, labor, materials, and disposal – so you see where the money goes. We pull the permits Los Angeles requires and stand behind the full installation with the 365-Day Done Right Promise: if the work fails inside that year, we come back and correct it at no charge. Finishes and trim on surrounding work come from a documented brand roster, including KraftMaid, Cambria, and Silestone when the project touches adjoining finishes.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
A homeowner can safely diagnose a failing fence – measure post spacing, photograph the bracket and hardware, check for a PGT label, probe the base of a leaning post with a screwdriver. What we’d steer you away from is resetting posts or reworking a gate yourself. A post footing set too shallow or too dry is the most common reason a fence fails twice, and a gate under tension can swing or drop on you if a bracket lets go while you’re working on it. There’s no part of this worth a hand injury. Call (844) 343-6681 and let us look at it – an on-site estimate is free, and you get the whole scope in writing before anyone picks up a post-hole digger.
FAQs

Most PGT fence systems last 15 to 25 years in Los Angeles in a good installation, and the gap between the bottom and top of that range is almost entirely footings and hardware exposure. A fence set in proper concrete depth and installed with coastal-rated fasteners reaches the upper end; one set shallow in clay without correct hardware fails in half that. Los Angeles sits in a climate that cycles dry and hot with a wet winter season, so drainage and footing depth matter more than the material itself.
Usually yes, if the damage is isolated. A single section, a gate, or a set of broken pickets can be repaired when the footings and framing are sound. We’ll tell you honestly when repair is the right call versus when re-setting the whole run is the cheaper long-term move – that’s a written determination, not a sales pitch. Call (844) 343-6681 and we’ll look at it before we tell you which way to go.
A typical PGT fence installation in Los Angeles takes one to three days, depending on linear feet, gate count, and whether new footings are being set. Footing concrete needs its own cure time before the fence loads onto it, so a full re-set sits at the longer end. We give you the schedule with the written price upfront, and we don’t move either one mid-job.
We measure the existing posts, panel spacing, and hardware, and match the spec to the surviving system – OEM where the manufacturer or a rated equivalent for structural pieces, quality aftermarket for cosmetic ones. You’ll see the part name and spec on the quote, not just a line that says “materials.” If it can’t be sourced or matched, you’ll know before any work starts, not after. For an exact quote on your Los Angeles fence, call (844) 343-6681 – estimates are free, and the price you get is the price you pay.
Contact
Squared away at close looks like this: clean site, documented scope, and a signed written guarantee in your hand. If your PGT fence is failing anywhere in Los Angeles, call Bradford Remodeling Co Los Angeles at (844) 343-6681 for a free estimate. A live person answers 24/7, our technicians have up to 22 years of experience, and every project carries the 365-Day Done Right Promise in writing.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












