







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Bathroom Remodeling: The Los Angeles Owner’s Guide
We handle PGT-compatible bathroom remodeling across Los Angeles, and the typical installed price for a full bathroom project runs $10,620 – $33,040, with smaller rooms landing in the $5,900 – $14,160 range. We quote a written, line-item price before any work starts, so there are no numbers that move once the crew is on site. Most Los Angeles owners we meet start by noticing the same thing: caulk lines around the base of the surround go soft, tile grout cracks in a spider pattern at the drain, or the enclosure starts holding a faint musty smell that comes back a week after cleaning. That’s usually the moment they open the browser and start pricing reality.
This page is written for the owner who already has a PGT-sourced product in the bathroom and wants straight talk about what’s failing, what a replacement costs in this market, and how it gets sourced. We’re an independent remodeling contractor and not affiliated with PGT. We don’t carry a warehouse of parts and we don’t pretend to; what we do is match the right part to the right model and install it to a written standard.
Key Takeaways
- Full PGT-compatible bathroom remodel in Los Angeles: $10,620 – $33,040 installed.
- Small bathroom remodel: $5,900 – $14,160; walk-in shower install: $5,310 – $14,160; tub-to-shower conversion: $4,130 – $11,800.
- Every price is written before work begins, and every completed project carries the 365-Day Done Right Promise.
- We’re independent of PGT and source parts by model number and spec, not by guesswork.
Which PGT Models This Applies To

PGT makes windows and doors primarily, and their bathroom-relevant lines are the impact-rated and vinyl units that show up in Los Angeles homes built or renovated in the last two decades. When a PGT product turns up inside a bathroom scope, it’s usually a window in the shower wall, a fixed unit above a tub, or a vinyl-framed slider in a bathroom adjacent to an exterior deck. The parts question matters because those openings need to be re-sealed and re-framed correctly when the surround, tile, or wall changes around them.
Here’s the compatibility gotcha that catches owners: PGT model numbers are stamped on a label on the sash or frame, not on the glass, and the label is often painted over or covered by a bathroom remodel that happened before. If the label is gone, we measure the rough opening in three places (top, middle, bottom) and cross-reference the R.O. dimensions against the manufacturer’s published spec instead of estimating. Ordering a shower window or wall unit by eyeball measurement is where most replacement failures start.
On the OEM-versus-aftermarket decision for PGT specifically: if the unit is still within the manufacturer’s coverage window, OEM is the right call. If it’s past that window, we’ll often spec a quality aftermarket equivalent with a comparable DP (design pressure) rating and explain in writing why the substitution makes sense. You get that reasoning in the quote, not as a verbal claim at the door.
For the rest of the bathroom, we work from a documented roster of kitchen and bath brands so specs are traceable rather than guessed at. That includes KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, Kohler and Moen fixtures, Therma-Tru doors, and PGT as the window and door line where it fits the opening.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Bathroom Remodeling Is Failing
- Soft caulk lines around the base of the surround. That’s water getting behind the caulk bead and breaking the seal at the tub lip. Left alone, it migrates into the framing behind the wall. In Los Angeles, dry spring and hot summer swings contract and expand that bead faster than most of the country expects.
- Spider-cracked grout at the drain. Grout cracking at the drain usually means the pan has flexed slightly, and the flex is happening because the substrate under the tile is moving. It isn’t cosmetic; it’s water ingress waiting to happen.
- A musty smell that returns after cleaning. That’s moisture trapped in a void behind the tile or under the pan where cleaning can’t reach. It comes back because the source is behind the surface.
- Grout or caulk cracking at the shower window or in the shower wall. This is the PGT-connected symptom. A vinyl frame moving against a rigid tile surround cracks the seal at the frame-to-tile joint. Re-caulking without addressing the frame movement is a short-term fix.
- Efflorescence (white chalky staining) on the tile or grout. That’s mineral salts being pushed out by water passing through the substrate. It can’t be scrubbed away because the moisture is behind it.
If you recognize two or more of those, the bathroom is due for a proper diagnosis, not another tube of caulk.
Replacement Cost & What’s Included

Here’s what a PGT-compatible bathroom project runs installed in Los Angeles:
| Scope | Installed Price Range |
|---|---|
| Full bathroom remodel | $10,620 – $33,040 |
| Small bathroom remodel | $5,900 – $14,160 |
| Walk-in shower installation | $5,310 – $14,160 |
| Tub-to-shower conversion | $4,130 – $11,800 |
| Shower replacement | $3,540 – $10,030 |
| Bathroom vanity installation | $945 – $3,540 |
What drives the range is the substrate condition behind the existing tile, whether the shower window or wall unit needs re-framing (a PGT unit that’s moving needs the rough opening squared up, not just re-caulked), and the fixture and surface tier. Everything in that number is written line-item in the quote: parts, labor, and any rough-in allowances. No verbal handshakes.
The work carries the 365-Day Done Right Promise. If the install fails inside that 12-month window, we come back and correct it at no charge. That’s in writing and handed to you at close, along with the documented scope.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely do a few things before we get there: check the PGT label for a model number, measure that label location, snap a photo of the failing joint, and note the date you first saw the cracking or smell. None of that involves opening a wall or removing tile.
What we don’t recommend is re-caulking over a moving frame or a cracked shower pan and calling it done. Caulk over a substrate that’s already failing hides the leak, extends it into the framing, and makes it more expensive to correct later. On a shower-replacement scope, the work involves rough-in, waterproofing membrane, and proper slope at the pan, all of which fail if they’re rushed. That’s not a job for a weekend and a caulk tube.
When you’re ready for an exact number, call (844) 343-6681. A live person answers, 24/7, not a voicemail. Estimates are free, and the price you get is written before a tool comes out.
FAQs

With proper substrate and waterproofing, the framing and surround should hold for 20 to 30 years; the caulk-and-grout at the frame and tub joints typically needs refreshing every 3 to 5 years. Los Angeles’s dry heat and seasonal swings stress caulk joints faster than more humid climates, which is why the joints at the shower window and tub lip are the first failure point we see. Call (844) 343-6681 for a diagnosis if yours are already cracked.
Sometimes, yes. If the PGT unit is intact, re-sealing and re-framing the rough opening is a legitimate repair. If the frame has warped or the glass seal is failing, replacement is the honest answer, and we’ll tell you which it is after looking. Call (844) 343-6681 for a free estimate.
A shower replacement is typically a two-to-four-day job once the substrate is opened and inspected. The wild card is always what’s behind the tile. If the substrate or framing is sound, the job runs on schedule; if there’s hidden rot or a failed pan, you’ll hear about it before we move forward, with a revised written price. Call (844) 343-6681 to schedule.
We source by model number and rough-opening spec, not by guesswork. For the bathroom scope beyond the window, we work from a documented roster of name-brand materials, including KraftMaid, Cambria, and Silestone alongside Kohler and Moen fixtures, so every spec is traceable and backed by a manufacturer’s warranty. Call (844) 343-6681 and we’ll walk through what your project needs.
Get Your Written Price
Bradford Remodeling Co Los Angeles is an independently owned and operated member of the Garrison Partners family, held to The Garrison Standard since 2004. Background-checked technicians, a written price before any work starts, and the 365-Day Done Right Promise on every completed project. Call (844) 343-6681 to schedule your free estimate. A live person answers, 24 hours a day.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












