







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The Los Angeles Owner’s Guide
Boral is a brand, not a single roof. If yours is failing, the “part” is almost always the tile itself, the underlayment beneath it, or a piece of flashing at a valley or penetration. Boral-compatible roof repair in Los Angeles runs $470 to $2,125 for localized work; a full roof replacement runs $9,440 to $23,600. We’re Bradford Remodeling Co Los Angeles, an independent contractor that installs and repairs Boral-spec roof systems. We are not affiliated with Boral.
Owners usually find out the hard way. A ceiling stain shows up after the first real rain of the season. A tile slides out of line on a hot afternoon and the whole course above it starts to look crooked. Or an inspector’s report names “lifted or cracked tile” and the sale stalls. In Los Angeles, a flat or low-pitch roof that has quietly aged out is the usual culprit, and the tile on top was hiding it for years.
Which Boral Models This Applies To

Boral makes clay and concrete tile in several regional profiles, plus flat tile, hip-and-ridge pieces, and their barrel and low-profile lines. The exact model matters because tile profiles are not interchangeable: a barrel tile (the rounded S-shape) has a different radius and thickness than a flat or an interlocking low-profile tile, and a ridge tile is molded to cap the peak, not to cover the field. Putting a flat tile where a barrel belongs leaves gaps that leak.
To identify your model, start at the underside of a tile at the eave where you can see the back. The courting on the back and the mold mark are the tell. Measure the tile’s exposed length and width, count the courses per square (100 square feet), and note the profile grain. Tile that’s been in the sun a while also shows a color code, often a Boral color. If you’re not sure, a photo of the field tile and one ridge piece usually settles it.
For the OEM-versus-aftermarket call: on a partial repair, matching the existing profile exactly is safer than saving a few dollars on a near-match, because a mismatched edge is where the next leak starts. When a large section is being replaced, a quality equivalent from a comparable manufacturer often works and can cost less. What we won’t do is mix a cheap substitute into a small repair and call it matched.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Roofing Is Failing
- A ceiling or wall stain after rain. The water has gotten past the tile and through failed underlayment or a broken flashing point above it. The tile is doing less than the owner thinks; the layer underneath is what’s carrying the water.
- Tiles sliding, lifting, or going crooked. This points to broken fasteners, a failed ridge, or a brittle tile that has lost strength to age and heat. Once one course moves, the ones above it lose their seat.
- Cracked, chipped, or crumbly tiles. Hail, foot traffic from a repair or solar install, and years of Los Angeles UV cycling all take tiles out. A small crack is a slow leak waiting for the right storm.
- Granule shedding or visible bald patches. On the underlayment or on a shingle layer beneath, this means the material has reached the end of its serviceable life. Bald spots are not cosmetic; the protective surface is gone.
- Water stains on the underside of eave or soffit, or a soft spot near a valley. This is the drainage telling you it’s overwhelmed at the flashing, often at the valley where two roof planes meet. It rarely fixes itself.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here are real Los Angeles numbers, not a “call for a quote” placeholder. Localized roof repair is $470 to $2,125. Tile roof repair specifically runs $710 to $2,950, reflecting the handling and breakage risk on tile. A full roof replacement is $9,440 to $23,600; metal roof installation, if you’re switching, is $17,700 to $47,200.
What drives the number is scope: how many squares, whether the underlayment has to come up, the pitch and access, and how much tile can be salvaged and reused. The price we give you is a written price before any work starts, with the part range and the labor separated, so you can see where the money goes. We do not reprice at the door. Every completed roof carries our 365-Day Done Right Promise: if the work fails within that year, we come back and correct it at no charge. We also work with GAF among other documented exterior brands, so specifications are traceable.
DIY or Call Us?
You can safely check things from the ground. Use binoculars to look for slid or missing tiles, check your ceiling and attic for stains after a rain, and photograph what you see. Do not climb onto a tile roof. Boral tile is brittle underfoot, a slipped tile is a fall risk, and the combination of height, slope, and breakable clay is a genuine hazard. Underlayment and flashing work is not a homeowner job.
Where DIY goes wrong is at the diagnosis and the layer beneath. A matching tile screwed over the old one hides a leak for a month and then ruins a ceiling. We come out, scope it honestly, put the price in writing, and if you hire us, we finish clean with the written guarantee in your hand. Call (844) 343-6681 for an estimate. A live person answers 24/7.
FAQs

Boral tile is built for a long life, and the tile is rarely the part that fails first. The underlayment beneath it is the moving piece, and it ages faster under Los Angeles UV and heat cycling than owners expect. The tile above can outlast the layer carrying the water, which is why an “old” roof sometimes only needs the underlayment and flashing addressed. Call (844) 343-6681 for an exact quote.
Often, yes. A localized break, a failed ridge, or a bad valley flashing usually gets repaired rather than torn out, and repair runs $470 to $2,125. If the underlayment is failing across a large area, patching becomes a temporary fix, and we’ll tell you which one you’re looking at. Call (844) 343-6681 for an exact quote.
A localized part swap is usually a single visit, while a full roof replacement takes several days depending on size and access. We won’t promise an exact calendar before we’ve walked the roof and measured the scope, because a real number needs real access. Call (844) 343-6681 for an exact quote.
We identify the model from the profile, exposed dimension, and color marking, then source a matching OEM or a documented quality-equivalent. We don’t claim to stock parts or carry them on the truck; we order the right part for your roof, so the match is verified before it goes on. Call (844) 343-6681 for an exact quote.
If you’ve got a Boral tile that moved, a stain that appeared, or an inspector’s report in hand, the next step is a written scope and a written price. Bradford Remodeling Co Los Angeles keeps that simple. Call (844) 343-6681 for a free estimate. We also handle KraftMaid, Cambria, and Silestone on the interior side if the same project crosses over.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












