







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Owens Corning Kitchen Remodeling: The Los Angeles Owner’s Guide
We install Owens Corning kitchen systems in Los Angeles homes, and a full kitchen remodel typically runs $16,520 – $53,100 installed. Owens Corning is known here mostly for insulation, roof shingles, and high-performance wall and sheathing products – it’s not a name most people connect to kitchen cabinets or tile. That’s exactly why owners landing on a page like this usually got here by reading a term off a submittal or a product label, or because their contractor specified an Owens Corning product somewhere in the assembly and a second crew used something else. The result is a mismatch nobody priced the first time. We sort that out.
Key Takeaways
- Owens Corning products do not cover cabinetry, countertops, or tile – they show up in the walls, insulation, and roof, plus the sheathing behind the kitchen backsplash.
- The correct Owens Corning product for a Los Angeles kitchen is determined by reading the model code on the visible edge of the label, not the label’s marketing name.
- Replacing an Owens Corning install mid-remodel is usually a written-scope fix, not a redesign – our line-item price shows exactly what’s being swapped.
- Every kitchen we finish is covered by the 365-Day Done Right Promise for a full year after completion.
Which Owens Corning Models This Applies To

Owens Corning manufactures a defined set of product families that can appear in a Los Angeles kitchen remodel. The main ones: R-13, R-15, R-21, and R-19 fiberglass batts (kraft- or unfaced) for wall and soffit cavities; Owens Corning Foamular rigid panels in thicknesses from ½” through 2″ for exterior sheathing and basement/rim cavities; Thermafiber mineral wool for sound and fire-rated partitions; and Oakridge and Duration roof shingles. None of those are cabinetry, countertops, or tile. If a homeowner believes Owens Corning makes a “part” that failed in their kitchen, the piece they’re looking at is almost certainly one of these wall products, the thermostat on a radiant mat, or an Owens Corning product sticker on a piece of sheathing behind a torn-out backsplash.
To identify the exact product, tilt the batt and read the vertical code on the label (“R-13” or “R-21”); Foamular panels carry an embossed panel-ID on the face. Kraft-facing matters more than the R-value in a Los Angeles kitchen; the wrong facing in a moisture-heavy wall behind a sink causes the failure far more often than R-value mismatch. Our technicians have up to 22 years of experience reading these against the actual cavity spec – not a contractor’s guess.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Owens Corning Kitchen Remodeling Is Failing
- Condensation on the wall above the backsplash after morning coffee. That’s usually a vapor-drive issue with the kraft facing positioned on the cold side of the cavity – common in Los Angeles kitchens where a contractor recommended the same batts used in an attic.
- R-13 batts sagging inside the wall cavity within two years. Friction-fit without the specified staples is the cause; Los Angeles summer heat cycling causes the narrow batt to slip and the lower corner to gap.
- Cold kitchen wall along a garage or exterior wall while the interior wall reads normal. Often a missing section of Foamular sheathing behind the drywall where the previous remodel stopped one panel short.
- Discolored or soft drywall at the base of a sink cabinet. Kraft-faced batts that got wet during the previous install will hold moisture long after the sink was set – Los Angeles winter rain finds the same path each year.
- Draft at the toe kick or under-cabinet outlet. R-19 compressed into a 2×4 cavity loses effectiveness fast; an overstuffed bay shows up as a draft the owner can feel with the oven vent running.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Los Angeles kitchen where an Owens Corning product needs to be corrected or replaced as part of a remodel, the installed cost tracks the scope of the work – not the price of the product alone. Insulation and sheathing correction inside a kitchen remodel is priced as part of the remodel, not as a separate line. A small Los Angeles kitchen remodel runs $10,620 – $23,600; the full remodel band is $16,520 – $53,100. Cabinet installation is $4,720 – $15,340, countertop installation $2,360 – $7,670, backsplash installation $945 – $2,950, and kitchen island installation $3,540 – $11,800. Every price is written before a single tool comes out. Our 365-Day Done Right Promise covers the work for a full year – including the assemblies behind the drywall.
DIY or Call Us?
You can safely measure cavities, photograph the existing Owens Corning label, and confirm the R-value and facing. Do not tear into a wet wall behind a sink, a pantry pocket, or a wall containing a live switch, outlet, or vent hood rough-in yourself. Foamular and Thermafiber panels cut easily, but handling mineral wool without protection and sealing penetrations correctly is where homeowner installs go wrong; the kitchen is a conditioned assembly, and mistakes show up as moisture months later. Call (844) 343-6681 and we’ll walk you through what to check over the phone – no charge, no obligation.
FAQs

How long does Owens Corning insulation last in a Los Angeles kitchen? The material itself doesn’t expire; the install fails first. In Los Angeles, kraft-faced batts in an exterior kitchen wall typically need attention within 10 – 15 years when facing placement or ventilation is wrong.
Can it be repaired instead of replaced? Sometimes. A sagging batt or a missing Foamular panel can often be corrected within the existing remodel scope – we price the correction as a written line item, not a re-quote. Call (844) 343-6681 for a free estimate.
How long does the swap take? A single-wall Owens Corning correction is typically a 1-day add-on inside a kitchen remodel; a full cavity re-insulation across the kitchen adds 2 – 3 working days. Timing is written into the scope.
How do you source Owens Corning parts? Through documented building-supply channels; Owens Corning warranties attach to products purchased through authorized suppliers, and our written scope lists the exact product and R-value. Call (844) 343-6681 for a free estimate.
Bradford Remodeling Co Los Angeles is an independent provider – we are not affiliated with Owens Corning. We’re reachable any hour at (844) 343-6681; a live person picks up.
Call (844) 343-6681 to schedule your free estimate. Bradford Remodeling Co Los Angeles installs premium, documented brands like KraftMaid, Cambria, and Silestone alongside Owens Corning systems, and every completed project comes with a written price before work starts and the 365-Day Done Right Promise behind it.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












