A Bradford company - serving Los Angeles, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
CertainTeed · Los Angeles

CertainTeed Bathroom Remodeling in Los Angeles, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Los Angeles
A low-threshold walk-in shower with a bench and grab bar
A powder room with botanical wallpaper and a stone sink
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A galley kitchen opened up to the dining room with a new peninsula
A remodeled family room with new windows and a window seat
A wide opening with a new beam where the kitchen wall was removed
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CertainTeed Bathroom Remodeling: The Los Angeles Owner’s Guide

Bathroom remodeling with CertainTeed materials in Los Angeles typically runs $10,620 – $33,040 installed, depending on whether you’re refreshing a half bath or rebuilding a primary suite. CertainTeed doesn’t make a single “bathroom part” that fails like a hinge or a valve; the name covers a family of products, most often interior and moisture-resistant gypsum board, tile backer board, fiber cement siding if your bath touches an exterior wall, and accessories like trim and corner bead. So when an Angeleno searches for a replacement, it usually means one of two things: the board behind the tile has gone soft after a slow leak, or a builder-installed CertainTeed product wasn’t finished right and the seam, corner, or edge is giving way. The call almost always comes after a tile pops loose, a corner beads rusts through, or a musty smell shows up under the vanity.

Call (844) 343-6681

Which CertainTeed Models This Applies To

CertainTeed bathroom-relevant board lines include GlasRoc (moisture- and mold-resistant gypsum for the room’s general walls), M2Tech (their moisture-resistant product used in many residential builds), Diamondback tile backer board, and SilentFX if sound control matters in a shared wall. Fiber cement exterior sheathing (WeatherBoards) matters when your bath sits against an outside wall. To identify what you have, look for the printed edge tape or the ink-stamped name on the board itself at the seam, or measure board thickness: 1/2 inch is common for general bathroom walls, 5/8 inch is common for ceilings and fire-rated assemblies, and Diamondback tile backer runs at 1/4 to 1/2 inch depending on application. On the OEM-versus-aftermarket question, CertainTeed-compatible backer and moisture board is widely stocked in standard widths, so a like-for-like replacement is usually straightforward. We’re an independent service provider and not affiliated with CertainTeed; we install to spec and match what’s already there where it makes sense.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CertainTeed Bathroom Remodeling Is Failing

In Los Angeles, bathroom board failures rarely announce themselves. Here’s what owners usually notice first, and why each one matters:

  • Tiles popping or hollow-sounding underfoot. Water behind the tile has softened the backer board. In a bath with any real shower use, that’s a backing failure, not a grout problem.
  • A musty smell under the sink or around the base of the shower. Moisture-resistant board slows water, it doesn’t stop it. A slow supply-line drip or a worn shower pan is feeding the board from behind.
  • Rust staining along a corner bead. Metal corner bead in a wet zone will rust once moisture reaches it, and that rust looks like a dark line running down a wall seam.
  • Yellow-brown ceiling stains below the bath. This points to a failed shower pan or a supply leak from above, not the board itself, but the board on the underside is what shows the symptom.
  • Crumbling or chalky texture at the base of a wall. That’s the paper face and gypsum core dissolving. Once a CertainTeed board reaches this stage, patching it holds for weeks, not years.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Replacing bathroom board and re-tiling the wet zones as part of a remodel in Los Angeles falls inside our standard bathroom-remodel range of $10,620 – $33,040. A focused small-bath refresh sits at $5,900 – $14,160. What drives the number up: how much tile comes off to reach the board, whether the shower pan needs redoing, whether plumbing behind the wall needs correcting, and whether this is a full rip-and-rebuild or a targeted re-board. What drives it down: keeping the tub or shower base, keeping the tile layout, and limiting the work to one wet wall. A written price comes before any work starts, and every completed project carries the 365-Day Done Right Promise: if the work fails within a year, we return and correct it at no charge.

DIY or Call Us?

You can safely inspect what’s failing without opening a wall. Check for soft spots with a firm press, look for rust at corner beads, and trace the shutoff valve behind the toilet or under the sink for a slow drip. Where DIY goes wrong is in the rebuild itself. Removing tile without damaging sound board, cutting back to solid material, and matching the existing board thickness and waterproofing detail so tile has a flat, sealed substrate is a job where small shortcuts show up six months later as cracks or a repeat leak. There’s no high-tension or gas hazard here, which is why this is a project you can thoughtfully scope. But the finish work is where the discipline shows. Call (844) 343-6681 and we’ll walk through what you’re seeing and set a free estimate.

FAQs

A tile setter installing wall tile in a shower

How long does CertainTeed bathroom board last in Los Angeles? A properly installed, well-sealed board behind tile commonly lasts 20 to 30 years, but in Los Angeles bathrooms with a shower and no exhaust fan, that lifespan shrinks fast because of year-round humidity. The board isn’t what fails first; the seal or the plumbing behind it is.

Can the board be repaired instead of fully replaced? Sometimes. If the failure is localized to one wall or a small area around a fixture, cutting back and re-boarding that section works and saves real money. If the softness runs more than a few square feet or reaches the shower pan edge, a full re-board is the honest answer. Call (844) 343-6681 for a free estimate and we’ll tell you which one you’re looking at.

How long does the swap take? A targeted re-board of one wet wall with re-tile typically runs 3 to 5 working days, plus dry time. A full bathroom remodel that touches tile, plumbing, or the shower pan runs 2 to 4 weeks. Timing depends on tile and fixture lead times more than the board work itself.

How do you source the part? We work with a documented roster of name-brand materials, including CertainTeed, and we specify the board by name, thickness, and product so you can see exactly what’s going in the wall before it does. We also install KraftMaid and Cambria cabinetry and surfaces when the project reaches that stage. We don’t claim to stock parts and we don’t carry a warehouse; we specify and install.

Every bathroom remodel we take on starts with a written price, runs with background-checked, uniformed technicians, and ends with a signed 365-Day Done Right Promise in your hand. A live person answers the phone 24/7. That’s The Garrison Standard, and it’s how we operate. Call (844) 343-6681 to schedule your free estimate.

Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled kitchen with a waterfall island and wood cabinetsAn open living space after a whole-home remodelA finished backyard cottage with a small covered porchA remodeled living room with built-in shelves around the fireplaceA single-story rear room addition with tall windows and a new patioAn open kitchen and dining area after a remodel

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Los Angeles

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Los Angeles team

A local vetted partner works across Los Angeles and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 343-6681
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Bradford Remodeling Co Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch