







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Kitchen Remodeling: The Los Angeles Owner’s Guide
We install kitchen remodeling systems built around CertainTeed-compatible materials in Los Angeles, and a full kitchen remodel typically runs $16,520 – $53,100 installed. Where CertainTeed panels, trim and finish components are part of the spec, we match the exact profile and series before anything is ordered. Most Los Angeles owners don’t realize a component is failing until they see lifting at a seam, a finish that’s chalking out, or trim that no longer sits flush after a dry season. By the time it’s visible, the issue has usually been working for a year or more.
Key Takeaways
- A full CertainTeed-spec kitchen remodel in Los Angeles runs $16,520 – $53,100 installed; smaller kitchens run $10,620 – $23,600.
- CertainTeed makes the panels, trim and finish components; cabinets, counters and fixtures come from our documented brand roster.
- We’re an independent Los Angeles service provider, not affiliated with CertainTeed.
- Every project gets a written price before work starts and the 365-Day Done Right Promise on the finished work.
Which CertainTeed Models This Applies To

CertainTeed’s kitchen-facing work falls into a few families: gypsum and fiberglass-reinforced panels used behind tile and cabinetry, exterior trim and soffit profiles, and finish systems. The model line matters because a panel that’s 5/8-inch thick with a specific tapered edge is not interchangeable with a 1/2-inch board from another series, even when both are stamped CertainTeed. That half-inch gap changes how cabinets hang and how a backsplash meets the wall.
To identify what you have, look for the printed stamp or edge tape on the panel or trim: it carries the series name, thickness and sometimes an ASTM reference. If the label is gone, measure the thickness at the edge with a tape and note whether the edge is square or tapered. For trim, measure the face width and profile depth. Those three numbers, thickness, edge type and profile width, are what any supplier needs to match the part.
On the OEM question: for CertainTeed panels and trim, the OEM match is usually the right call because the profile and finish are the whole point. A generic equivalent will fit, but it won’t match the existing run, and in a visible kitchen that mismatch shows. We don’t claim to stock CertainTeed parts. What we do is spec the correct series, order it, and install it to the manufacturer’s published detail. We work the same way with KraftMaid, Cambria and Silestone when a kitchen mixes those with CertainTeed components.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CertainTeed Kitchen Remodeling Is Failing
- Lifting or bubbling at a seam. Moisture has gotten behind the panel or the joint wasn’t taped to spec. In Los Angeles kitchens, a dishwasher or sink leak usually starts this six to twelve months before you see it.
- Chalking or fading on a finish. CertainTeed finishes are rated for UV, but a south-facing kitchen window in Los Angeles pushes that rating harder than a shaded wall. When the surface powders when you rub it, the finish has broken down.
- Trim pulling away from the wall or soffit. Fasteners have backed out or the substrate behind the trim has moved. Our dry seasons shrink wood framing, and a trim run fastened without allowance for that movement will gap each summer.
- Soft spots or a hollow sound behind tile. The panel behind the tile has taken on water and lost its bond. A hollow tap over a backsplash is the tell, and it means the tile has to come off to fix it.
- Cracks at corners or above door openings. Movement in the framing is telegraphing through a joint that was never properly reinforced. This one is common in older Los Angeles homes where the framing has shifted since the original remodel.
Replacement Cost & What’s Included

For Los Angeles, these are the installed ranges we work from, and they hold:
- Full kitchen remodel: $16,520 – $53,100
- Small kitchen remodel: $10,620 – $23,600
- Cabinet installation: $4,720 – $15,340
- Countertop installation: $2,360 – $7,670
- Backsplash installation: $945 – $2,950
- Kitchen island installation: $3,540 – $11,800
What moves a given kitchen toward the top of that range: how much panel and trim work is exposed, whether the substrate has to be replaced, and whether the layout changes. What keeps it low: keeping the footprint, reusing sound cabinetry, and a straight panel-and-trim replacement with no surprises behind the wall. We give you one written price before any work starts. No numbers that move once the crew is in your kitchen. Every finished project carries the 365-Day Done Right Promise: if the work fails inside that year, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself. Run a hand along a seam to feel for lifting. Tap along the backsplash and listen for hollow spots. Measure panel thickness at the edge and write down the model stamp. Photograph the label before you call anyone.
Where DIY goes wrong: opening up a wall to replace a panel behind tile, or pulling trim that’s carrying a soffit. Both put you into the framing and the electrical and plumbing running inside those walls. Old homes in Los Angeles often have wiring and supply lines in places a 2010s remodel wouldn’t put them, and a crew can’t see that until the wall is open. That’s the point to stop and hand it off. If you’ve got a bubbled seam, a soft backsplash or trim that won’t stay put, call (844) 343-6681 for a free estimate. A live person answers, day or night.
FAQs

Expect 20 to 30 years on interior panels in a dry, conditioned kitchen, and closer to 15 to 20 on exterior trim exposed to full Los Angeles sun. The variable is moisture, not age: a slow leak behind a sink ends the run early regardless of the panel’s rating. If your panel is past 15 years and showing any of the symptoms above, call (844) 343-6681 for an exact quote. Estimates are free.
Sometimes, yes. A single lifted seam or a backed-out trim run can often be re-taped, refastened and refinished without touching the rest of the run, and that’s the cheaper path when the substrate is sound. A soft panel behind tile can’t be repaired; it has to come out. We’ll tell you which one you have after we look. Call (844) 343-6681 and we’ll price both options in writing.
A trim or backsplash-level panel replacement typically runs one to three days. When cabinets or a full panel run is involved, a small kitchen runs one to two weeks and a full remodel runs four to eight weeks. The schedule is in writing with the price, so you know the window before the crew shows up. Call (844) 343-6681 to schedule your free estimate.
We identify the series from the printed stamp, thickness and edge type, then order the matching part directly and install it to CertainTeed’s published detail. We don’t claim to carry CertainTeed parts; we match and order the right one. Uniformed, background-checked technicians handle every job. Call (844) 343-6681 for a free estimate.
Schedule Your Free CertainTeed Kitchen Estimate in Los Angeles
Bradford Remodeling Co Los Angeles is an independent Los Angeles remodeling contractor, not affiliated with CertainTeed. We’re part of the Garrison Partners family, and every project runs by The Garrison Standard: a written price before the first tool comes out, a clean site at close, and a signed written guarantee in your hand when we’re done. Our technicians have up to 22 years of experience. Whether you’re replacing a trim run, redoing a backsplash, or taking the whole kitchen down to the studs, call (844) 343-6681 to schedule your free estimate. A live person picks up, 24/7.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












