







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Kitchen Remodeling: The Los Angeles Owner’s Guide
We install Sterling-compatible kitchen components across Los Angeles, and full kitchen remodeling projects here run $16,520 – $53,100 installed, depending on cabinet count, surface material, and how much of the electrical and plumbing rough-in has to move. That price is written down before we start, not quoted at the door. The failures usually announce themselves slowly: a cabinet door that won’t sit flush anymore, a drawer that grinds on the last two inches, a hinge that’s begun to sag the whole run out of line.
Most Los Angeles homeowners find us after living with that small annoyance for months, then noticing the second cabinet, then the third. By the time they call, the box has usually softened where the hinge screw pulled out – it’s the same failure pattern we see citywide, and it’s fixable. A real number, a written scope, and a full-year guarantee on the finished work: that’s what this page is here to give you.
Key Takeaways
- Typical Sterling kitchen remodeling in Los Angeles runs $16,520 – $53,100 installed.
- Cabinet installation is $4,720 – $15,340; countertops $2,360 – $7,670; backsplash $945 – $2,950.
- A written price comes before any work starts, every time.
- The 365-Day Done Right Promise covers the finished work for a full year at no charge if it fails.
- A live person answers the phone at (844) 343-6681, 24 hours a day.
Which Sterling Models This Applies To

Sterling has used several cabinet box and door configurations across its lines, and the part you need depends on which one you have. The fastest way to identify it is the specification label inside the cabinet door or on the inside of the sink base – it lists the series, box dimensions, and hinge drilling pattern. If the label is gone, measure the door height and the hinge cup bore (most Sterling runs use a 35mm cup, but confirm yours before ordering). A door from the wrong series will drill off-center, and no amount of adjusting fixes it.
On the OEM-versus-aftermarket question, the honest answer is that hinges and drawer slides have genuine equivalents. Blum, Grass, and Hettich make hardware that matches Sterling’s bore pattern and load rating, often at less cost and with a longer stated cycle count. Where we don’t substitute is the cabinet box and door face itself. Sterling’s box thickness and finish hold up, and swapping in a thinner aftermarket box to save money is the kind of shortcut that shows up two years later when the doors won’t align.
Our technicians have up to 22 years of experience matching hardware to cabinet systems. Bradford Remodeling Co Los Angeles is an independent service provider and is not affiliated with Sterling – we work with KraftMaid, Cambria, and Silestone among other documented brands, and we treat Sterling the same way, matching the part to the spec.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sterling Kitchen Remodeling Is Failing
- A cabinet door that sags and won’t stay aligned. This is almost always a hinge that’s lost its tension or a screw that’s pulled out of softened particleboard. Once the hole is stripped, tightening the screw buys you a week at most.
- A drawer that grinds or sticks near the end of its travel. The slide’s ball bearings have worn or the track has bent. If it’s the undermount type, the drawer box itself may have warped from moisture near the sink.
- Soft, swollen wood around the sink base or under a dishwasher. Los Angeles kitchens take on moisture in ways owners don’t expect – a slow drip under a P-trap swells the substrate before you ever see a puddle. The cabinet box is compromised at that point.
- A countertop seam that’s begun to lift or darken. That’s a failed adhesive joint or water getting under the edge. On quartz surfaces it means the seam needs re-sealing before the stain spreads into the stone.
- Doors that rub against each other or the frame when closed. The cabinet box has shifted, or the frame is out of plumb. Rubbing across a run of three or more doors means the installation has moved, not just one hinge.
Sterling kitchens in Los Angeles get a lot of sunlight through west-facing windows, and UV exposure accelerates finish fading and door warpage over years. If your cabinet faces look chalky or the color has shifted unevenly, that’s sunlight, not a defect – but it does mean the finish has aged past its protection window.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the installed pricing for Sterling-compatible kitchen work in Los Angeles. These are the ranges we quote, with parts and labor broken out in the written estimate before anything moves:
| Item | Installed range |
|---|---|
| Kitchen remodel (full) | $16,520 – $53,100 |
| Small kitchen remodel | $10,620 – $23,600 |
| Cabinet installation | $4,720 – $15,340 |
| Countertop installation | $2,360 – $7,670 |
| Backsplash installation | $945 – $2,950 |
| Kitchen island installation | $3,540 – $11,800 |
What drives the range: the number of cabinet boxes and whether any of the electrical or plumbing rough-in has to be relocated, which material you choose for the counter, and whether the existing substrate under the floor is sound. A straight door-and-drawer hardware swap stays at the low end. A full cabinet run with a quartz surface and a relocated sink pushes toward the top. The written price locks before we start, and it doesn’t move. Every completed job carries the 365-Day Done Right Promise: if the work fails inside that year, we come back and correct it at no charge.
DIY or Call Us?
You can safely check the specification label, measure the door and hinge bore, and tighten a hinge screw that’s only slightly loose. That’s the useful extent of it. Where DIY goes wrong on Sterling kitchen work: re-drilling a stripped hinge hole with a larger screw splits the box, and a mismatched hinge cup bores off-center in one pass with no repair. Countertop seams and any work touching a gas line or a live electrical circuit are not homeowner jobs – both are genuinely dangerous, and both should go to a trained professional.
If a drawer or door has been binding for months, the underlying box may already be swollen. Give us a call at (844) 343-6681, and a live person will pick up, day or night. We’ll schedule a free estimate and put the price in writing.
FAQs

Sterling boxes and doors typically hold up 15 to 25 years in Los Angeles, with hinges and drawer slides being the first parts to wear at 8 to 12 years. The dry inland heat and the coastal humidity swing both age hardware faster than a climate with less range. Hardware swap is a fraction of a full cabinet replacement.
Yes in many cases. A door that sags because of a worn hinge is a hinge replacement, not a cabinet replacement. Stripped hinge holes can be repaired with a hardwood insert and re-drilled. If the box itself is swollen or the frame is out of plumb, repair stops being honest and replacement is the right call. Call (844) 343-6681 for a free estimate and an exact quote on which side of that line yours is on.
Most hardware swaps run one to two days for a standard kitchen. If the cabinets also need re-drilling or a door is being matched to a new series, plan on two to three. We’ll give you the time window in the written scope so you’re not guessing.
We start with the spec label inside the cabinet, then match the bore pattern and load rating to a documented hardware line – Blum, Grass, or Hettich are common equivalents. We don’t carry parts on a truck; we order against the confirmed model. That’s one extra day at most and it means the part fits when it arrives, not after. Call (844) 343-6681 to get the estimate started.
Ready for a real number and a written scope? Call Bradford Remodeling Co Los Angeles at (844) 343-6681 for a free estimate. We install Sterling-compatible kitchens citywide, we put the price in writing before any work starts, and every finished job carries the 365-Day Done Right Promise. The phone is answered by a live person, 24 hours a day – no voicemail, no callback queue.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












