







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
American Standard Home Additions & ADU: The Los Angeles Owner’s Guide
Quick answer: A home addition built to American Standard-compatible specifications in Los Angeles typically runs $53,100 – $153,400 installed, with ADU construction at $106,200 – $259,600 and garage conversions at $35,400 – $94,400. This is planned construction, not emergency work, so we scope it properly rather than promising same-day results. Most Los Angeles homeowners start down this road when a failing conversion stops feeling safe: a garage that has shifted, a room that wasn’t permitted, a “finished” ADU with no signed guarantee in hand. We’re an independent provider, not affiliated with American Standard, and we quote a written price before any tool comes out.
Which American Standard Models This Applies To

American Standard parts fall into two families that confuse people constantly. Their fixtures and trim lines (the Town Square, Studio, and Cadet families) follow consistent rough-in dimensions, so matching a replacement is usually a spec lookup. Their structural and envelope components, the windows and exterior doors that get spec’d into additions and ADUs, follow a labeling system tied to the original panel stamp.
To identify what you’re working with, don’t trust the showroom tag. Find the manufacturer label on the fixture or the glass-etched stamp in the corner of the window, and write down the model number, the rough opening dimensions, and the series name exactly as printed. Then measure the actual opening in the wall with a tape. The #1 compatibility gotcha we see in Los Angeles: a nominal 30-inch rough-in that measures 29 5/8 on the studs after framing lumber has dried and shrunk. If you order on the label alone, the replacement won’t seat.
On OEM versus aftermarket: American Standard factory parts are the safe default for anything with a warranty attached, and aftermarket equivalents are fine for standard trim and hardware if the spec sheet matches within tolerance. The decision should be traceable in writing, which is why we keep interior and spec finishes to a documented roster (KraftMaid, Cambria, Silestone and others) so nothing is left to guesswork.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your American Standard Home Additions & ADU Is Failing
Every failure we see traces back to a specific cause. Walk the space and look for these five, each with the underlying reason it happens:
- Doors and windows that stick or gap at one corner. That usually means settlement at the foundation or a header that was undersized. In Los Angeles, expansive clay soils in the Valley push and pull with the dry-wet cycle, and an addition framed without proper footing depth will telegraph every movement into the openings.
- Water staining at the exterior-to-interior transition where the addition meets the original house. This is a flashing or drainage detail that failed. The seam where old wall meets new wall is the weakest point in the whole assembly.
- Drywall cracks running diagonally from door or window corners. Diagonal cracks point to movement; vertical cracks at seams usually point to poor taping. The two need different fixes and only one is cosmetic.
- An ADU or garage conversion that fails inspection or can’t pull a permit. Often the original work was done without permits, and unpermitted square footage can’t be financed, insured, or counted. This is the big one in Los Angeles, where the building department scrutinizes conversions closely.
- Sun-faded or warped exterior trim and glazing. Our UV load and heat cycling degrade exterior finishes and window seals faster than the same product would last up north. A window stamped for a moderate climate can fail years early here.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the honest installed price picture for Los Angeles, so you have a real number instead of “call for a quote.”
| Scope | Installed price range |
|---|---|
| Home Addition | $53,100 – $153,400 |
| ADU Construction | $106,200 – $259,600 |
| Garage Conversion | $35,400 – $94,400 |
What drives the range: square footage, foundation conditions (deeper footings on clay soils cost more), permit and inspection scope, and whether the original structure needs correction before new work starts. The price we quote is written, line-item, and doesn’t move at the door; permits get pulled and inspections passed so the finished space is legal and financeable. Every completed project carries the 365-Day Done Right Promise: a full-year written guarantee, and if the work fails inside that window, we return and correct it at no charge. You close with a clean site, documented scope, and a signed guarantee in your hand.
DIY or Call Us?
Some things you can safely check yourself: write down model numbers, measure openings, photograph cracks and water stains, and pull permit history from the city. Keep that file.
Where DIY goes wrong is structural and envelope work. Underpinning a foundation, re-flashing a seam between two buildings, opening a load-bearing wall, or wiring and venting a conversion are all jobs where a small error creates a costly, sometimes dangerous, problem. A garage conversion especially involves framing, electrical, plumbing, and ventilation that must pass inspection. We do the scope properly and put the guarantee in writing. Call (844) 343-6681 to schedule your free estimate.
FAQs

How long does an American Standard-compatible addition or ADU last? Built to code with correct footings and flashing, a well-built addition lasts decades; the parts that fail early are almost always the envelope details, not the structure. In Los Angeles, UV and soil movement are what shorten that lifespan, so those are the details worth getting right. Call (844) 343-6681 for an exact quote; estimates are free.
Can it be repaired instead of rebuilt? Sometimes. Cosmetic cracking, one failed window seal, or a single flashing detail can often be repaired far cheaper than replacing the whole assembly. Structural settlement or unpermitted work usually can’t be patched, it has to be corrected. A written assessment tells you which one you’re facing before you spend. Call (844) 343-6681 for an exact quote.
How long does the swap take? A single part replacement takes a few hours; a garage conversion or addition runs weeks to months depending on scope, permits, and inspection scheduling. We give you a written timeline with the price, not a guess at the door. Call (844) 343-6681 for an exact quote.
How do you source the part? We match to the surviving label and the measured opening, and spec from a documented brand roster so the material has manufacturer specs and warranties behind it. You get the part number in the written scope. Call (844) 343-6681 for an exact quote.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












