







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
American Standard Driveway & Pavers: The Los Angeles Owner’s Guide
If your American Standard driveway or paver system has cracked, heaved, or settled, we install American Standard-compatible paver and hardscape replacements across Los Angeles for $8,260 – $21,240 for a full paver driveway, with concrete driveway installation running $5,310 – $14,160. Most Los Angeles owners discover the failure the same way: a hairline crack widens into a trip hazard after a wet winter, or a driveway slab heaves at a root line and starts holding standing water after every rain. Bradford Remodeling Co Los Angeles is an independent service provider and is not affiliated with American Standard.
Key Takeaways
- Paver driveway installation in Los Angeles: $8,260 – $21,240 installed.
- Concrete driveway installation: $5,310 – $14,160. Driveway replacement: $5,900 – $16,520.
- Driveway sealing to protect the surface: $295 – $825.
- Every job gets a written price before work starts and the 365-Day Done Right Promise.
Which American Standard Models This Applies To

American Standard’s driveway and paver lines sit within its hardscape and exterior surface catalog, and the part that actually fails is usually one of four things: a modular paver unit, a paver base layer, a polymeric joint sand, or a concrete surface section. To match the right replacement, check the product label or embossed stamp on the underside of a loose paver and measure the unit in place – length, width, and thickness in millimeters. American Standard paver systems vary by series, and a nominal 60mm or 80mm base thickness is not interchangeable with a 50mm landscape-grade unit; the wrong thickness creates a lip or a rocking joint within a season.
On the OEM-versus-aftermarket decision, American Standard replacement pavers are the safe match when you need an exact color and dimension to blend with existing units. A quality aftermarket paver from a documented brand set – Belgard and Unilock are two we work with – is often the better call for a full driveway where color matching is less critical and the base build matters more than the face unit. Either way, we don’t carry parts on a truck and we don’t claim to stock American Standard inventory. We source the correct part to spec and install it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your American Standard Driveway & Pavers Is Failing
Los Angeles hardscape fails on a different timeline than hardscape in wetter climates. Long dry stretches followed by winter rain drive water under the surface, and the damage shows up in these patterns:
- Hairline cracks spreading across a concrete surface. Usually thermal movement combined with a thin or under-compacted base, and they widen every dry-hot season.
- Paver units rocking or sinking at a corner. The joint sand has washed out and the base layer has lost compaction, so the unit no longer bears on a flat surface.
- Heaving or a lifted section of driveway. Tree roots or expansive clay soils pushing up from below, common on older Los Angeles lots near mature ficus and eucalyptus.
- Standing water after rain. A slope or drainage failure, not a surface cosmetic issue – water sitting on the driveway will keep working into the base.
- Crumbling joint sand and weeds in the seams. The polymeric sand has aged out, which lets water straight into the base and speeds up the next failure.
If you see two or more of these at once, the surface is telling you the base is the real problem. Resurfacing over a failed base is money spent twice.
Replacement Cost & What’s Included

Here are the installed Los Angeles ranges we quote for this work. The price you get in writing is the price – no numbers that move at the door.
| Job | Installed range (Los Angeles) |
|---|---|
| Paver driveway installation | $8,260 – $21,240 |
| Concrete driveway installation | $5,310 – $14,160 |
| Driveway replacement | $5,900 – $16,520 |
| Driveway sealing | $295 – $825 |
| Paver patio installation | $4,130 – $12,980 |
What drives the range: square footage, base depth and compaction, the paver unit or concrete mix you choose, and how much demolition and haul-off the old surface requires. Your written quote breaks out parts and labor as separate line items so the parts cost is visible, not buried. Every completed project is covered by the 365-Day Done Right Promise – if the work fails within that year, we come back and correct it at no charge, with a signed written guarantee in your hand at job close.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself: walk the driveway and note which units rock or sound hollow, measure a loose paver to confirm its size, and photograph standing water after rain to show where the slope fails. Those notes make for a sharper quote. Where DIY goes wrong on hardscape is the base and the demolition – lifting a settled section, re-compacting a base to spec, and re-setting pavers to a true grade takes equipment and a level tolerance most homeowners don’t have on hand, and a base that’s 90% right fails in a single Los Angeles rainy season. Pulling up a large slab by hand is also a back injury waiting to happen. Call (844) 343-6681 for a free written estimate and let the trained crew handle the heavy work.
FAQs

A properly built paver driveway with a compacted base and polymeric sand typically holds 20 to 30 years; a concrete surface averages 25 to 30 years with sealing every few years. Los Angeles heat and dry-then-wet cycles are the main accelerants, which is why sealing every two to three years ($295 – $825) pays for itself. Call (844) 343-6681 for an exact quote on your driveway – estimates are free.
Yes, partial repair is often the right call when the failure is localized – a sunken group of units or one lifted section. If the base under most of the driveway has lost compaction, a spot repair just moves the problem down the line. We’ll tell you which one your driveway needs, in writing. Call (844) 343-6681 to schedule your free estimate.
A partial paver repair is usually a one- to two-day job; a full paver or concrete driveway takes several days to a couple of weeks depending on square footage, demolition, and cure time. Concrete needs curing before you drive on it, so plan for that window. Call (844) 343-6681 for a written timeline with your price.
We match the part to your specific American Standard model by label, stamp, and measured dimensions, then confirm the OEM unit or a documented aftermarket equivalent from brands like Belgard and Unilock before ordering. You’ll see the part spec on the written quote. We also work with KraftMaid, Cambria, and Silestone on the interior side of the same home. Call (844) 343-6681 – a live person answers around the clock – to schedule your free estimate.
Get Your Los Angeles Driveway or Paver Project Priced in Writing
Bradford Remodeling Co Los Angeles is part of the Garrison Partners family, established in 2004, and operates independently under The Garrison Standard: a written price before any work starts, background-checked uniformed technicians on every job, a live person answering the phone 24/7, and the 365-Day Done Right Promise on every completed project. Our technicians have up to 22 years of experience. Call (844) 343-6681 today for your free estimate and know exactly what your Los Angeles driveway or paver project costs before a single tool comes out.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












