A Bradford company - serving Los Angeles, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
American Standard · Los Angeles

American Standard Windows & Doors in Los Angeles, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Los Angeles
A low-threshold walk-in shower with a bench and grab bar
A powder room with botanical wallpaper and a stone sink
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

American Standard Windows & Doors: The Los Angeles Owner’s Guide

We install and service American Standard-compatible windows and doors across Los Angeles, and most full window replacements here run $5,310 to $17,700, with impact-rated units landing between $9,440 and $29,500. If a seal, sash, or door slab has failed, a single-unit repair usually costs far less than a full replacement, and we can price it in writing before anyone touches your house. Bradford Remodeling Co Los Angeles is an independent service provider, not affiliated with American Standard. Owners usually find the problem the same way: a foggy double-pane, a sash that sticks in summer heat, or a door that whistles when the Santa Ana winds pick up.

Call (844) 343-6681

Key Takeaways

  • Full window replacement in Los Angeles: $5,310 – $17,700; impact-rated: $9,440 – $29,500.
  • Most failures trace to a failed seal, worn weatherstripping, or a cracked sash, not the whole unit.
  • You get a written price before work starts and the 365-Day Done Right Promise on the install.
  • Call (844) 343-6681 for a free estimate.

Which American Standard Models This Applies To

American Standard window and door lines have shifted over the decades, so matching a part to your exact unit matters more than the brand name on the glass. Early vinyl and aluminum series used different sash balances, weatherstrip profiles, and seal systems than the newer energy-rated lines. The first job is identification: check the glass for an etched or stamped label (usually a small mark in a corner), the frame for a manufacturing sticker, and the sill or jamb for a model tag. If none survives, we measure the rough opening, the glass unit thickness, and the sash channel depth – those three numbers tell us which replacement sash, seal kit, or door slab fits. For American Standard specifically, the OEM-versus-aftermarket call comes down to availability: genuine sash and seal kits for older series can be slow to source, while a quality aftermarket sash matched to the same glass thickness and channel works reliably in most cases. Where an exact OEM match exists, we quote it; where it does not, we say so plainly and price the closest verified equivalent. We also service KraftMaid, Cambria, and Silestone cabinetry and surface projects, but windows and doors are their own discipline with their own specs.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your American Standard Windows & Doors Is Failing

  • Fogging or condensation between the panes. A broken seal lets moisture into the insulated glass unit. In Los Angeles, the marine layer and coastal humidity make this show up faster on west-facing windows.
  • Drafts or whistling at the frame. Worn or compressed weatherstripping stops sealing. Santa Ana wind events push hard against it and expose gaps you never noticed in calm weather.
  • A sash that sticks, drags, or won’t lock. Heat expansion and a worn balance or channel cause this. A sash that won’t latch is a security problem as much as a comfort one.
  • Water staining or rot at the sill or jamb. A failed seal or blocked weep hole lets water sit against the frame. In a region that goes months without rain then gets a soaking storm, small leaks hide until they’ve done real damage.
  • A door that swings, rubs, or won’t close flush. A warped slab, worn hinges, or a failed threshold seal. On exterior doors this also lets heat and pests in.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing for Los Angeles depends on unit count, glass rating, and frame material. Standard window replacement runs $5,310 – $17,700; impact-rated window installation runs $9,440 – $29,500 for homes needing that rating. A single failed insulated glass unit or a worn door slab sits at the low end; a multi-window replacement with impact glass sits at the top. Every price we give is written before work begins – line-itemed by unit, glass spec, and labor, with no numbers that move at the door. Labor includes removal, disposal, sealing, and trim. All completed work carries the 365-Day Done Right Promise: if the install fails within a full year, we return and correct it at no charge. Call (844) 343-6681 for an exact written quote; estimates are free.

DIY or Call Us?

A few things you can safely check yourself: wipe the glass to confirm fogging is between the panes and not on the surface, inspect weatherstripping for cracks or compression, and test every lock and latch. What we don’t recommend is replacing an insulated glass unit or a full door slab on your own. Glass units are heavy, breakable, and seated with precise shims and sealant; a bad seal on a fresh unit fails again within a season, and a dropped unit is a serious injury risk. Exterior door replacement involves removing the frame and resealing the rough opening – get that wrong and you’re chasing water intrusion for years. Our technicians, with up to 22 years of experience, handle the removal, sealing, and trim so the opening stays watertight. Call (844) 343-6681 and we’ll tell you honestly whether your unit needs a repair or a replacement.

FAQs

A tile setter installing wall tile in a shower

How long does an American Standard window or door last in Los Angeles? Most insulated glass units hold their seal 15 to 20 years, and frames last 20 to 30 with proper sealing. UV exposure and coastal humidity are the main shorteners here, so west-facing and beach-adjacent units tend to fail first.

Can a failed window seal be repaired instead of replaced? Often yes – a single fogged pane can be re-glazed rather than replacing the whole window, which costs far less. If the frame is sound, we repair; if the frame or balance is worn, we’ll say so and price the replacement. Call (844) 343-6681 for an exact quote.

How long does a window or door swap take? A single window or door slab is usually a half-day; a full-house replacement runs several days depending on unit count. We give the timeline in writing with the price.

How do you source the right American Standard part? We identify the model from the glass label or by measuring the rough opening, glass thickness, and sash channel, then source the OEM part where available or a verified equivalent where it isn’t. We describe exactly what we’re installing before we order it.

Call (844) 343-6681 for a free estimate. A live person answers around the clock, and every price comes to you in writing before we start.

Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A single-story rear room addition with tall windows and a new patioAn open kitchen and dining area after a remodelA whole-home remodel with the living, dining and kitchen areas opened upA second-story addition that matches the existing rooflineA galley kitchen opened up to the dining room with a new peninsulaA remodeled family room with new windows and a window seat

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Los Angeles

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Los Angeles team

A local vetted partner works across Los Angeles and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 343-6681
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Bradford Remodeling Co Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch