







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
American Standard Kitchen Remodeling: The Los Angeles Owner’s Guide
If you’re searching for American Standard kitchen remodeling in Los Angeles, here’s the short answer: American Standard doesn’t manufacture cabinetry, countertops, or surfacing, so an “American Standard kitchen” almost always means American Standard plumbing fixtures – faucets, sinks, and disposal parts – inside a kitchen that’s otherwise being rebuilt around them. Full kitchen remodeling in Los Angeles runs $16,520 – $53,100 installed, and small kitchen remodels run $10,620 – $23,600, with the fixture work quoted as its own line item. Most owners discover their American Standard problem the same afternoon: the pull-down sprayer stops retracting, a faucet base rocks slightly against the sink deck, or a disposal begins humming without spinning. The kitchen looks fine until one part quits.
Key Takeaways
- American Standard makes the plumbing fixtures and disposal parts in your kitchen, not the cabinets or counters.
- Los Angeles kitchen remodels run $16,520 – $53,100; small remodels $10,620 – $23,600.
- Fixture-only work (faucet, sink, disposal) is a small slice of a full remodel and can be quoted separately in writing.
- We’re an independent service provider, not affiliated with American Standard; we install and replace American Standard-compatible parts.
- Every completed project carries the 365-Day Done Right Promise: if the work fails inside that window, we return and correct it at no charge.
Which American Standard Models This Applies To

American Standard sells faucets across several families – Colony, Monterrey, Fairbury, Beale, and the higher-end Portsmouth and Delancey lines among them – and the parts are not interchangeable between them. A pull-down sprayer head that fits a Beale is not the same part that fits a Monterrey. The first thing we do on any American Standard fixture call is identify the exact model.
Here’s how to find it. Look under the sink at the faucet body: American Standard stamps a model number and often a date code on a metal tag or directly on the shank. If it’s worn off, take a photo of the faucet from the front and measure the spout reach and the distance between the handle centers. Those measurements narrow the field to a handful of models. Also open the cabinet under the disposal (or look at the label on the unit itself) if the disposal is the part in question – American Standard disposal model numbers tell you the horsepower class and whether the mounting collar is the standard 3-bolt 3½-inch type, which most but not all are.
OEM vs. aftermarket: for American Standard specifically, we lean OEM on internal valve cartridges, because aftermarket cartridges are the number one cause of a faucet that drips again within a year. For cosmetic parts like aerators, sprayer heads, and escutcheons, a quality aftermarket equivalent is fine and noticeably cheaper. We don’t stock parts and we don’t carry them on a truck; we source the correct part to the confirmed model before installation day so there’s no second trip and no guesswork.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your American Standard Kitchen Remodeling Is Failing
American Standard fixtures in Los Angeles fail on a fairly predictable schedule, helped along by our hard municipal water and the temperature swings between a hot inland kitchen and a cool cabinet base. Here’s what owners actually notice:
- The faucet drips at the spout when the handle is off. That’s a worn cartridge or seat, not a loose handle. Hard water etches the sealing surface over time, and the drip worsens before it stops.
- The pull-down sprayer won’t stay docked. The retraction magnet or the hose weight has failed, or the hose has swollen and started catching on the deck plate. It’s usually the sprayer head, sometimes the hose.
- The faucet base rocks when you move the handle. The mounting nut or washer under the sink has loosened or cracked. On a granite or quartz counter this also means water can reach the counter cutout edge, which we don’t like to leave.
- The disposal hums but doesn’t spin. Something is jammed or the starting winding has given out. Never reach in to free it while it’s powered – more on that below.
- Water pools under the disposal or the faucet shank. A failing flange gasket or disposal mount leaks slowly and rots the cabinet floor before you see it. If the cabinet floor feels soft, tell us when you call.
Replacement Cost & What’s Included

Fixture and part replacement is priced as a line item, not buried in a lump sum. Here’s how the numbers work in Los Angeles, alongside the broader remodel ranges so you can see where the fixture work sits:
| Scope | Installed Range (Los Angeles) |
|---|---|
| Kitchen remodel (full) | $16,520 – $53,100 |
| Small kitchen remodel | $10,620 – $23,600 |
| Cabinet installation | $4,720 – $15,340 |
| Countertop installation | $2,360 – $7,670 |
| Backsplash installation | $945 – $2,950 |
| Kitchen island installation | $3,540 – $11,800 |
What moves the fixture line: whether it’s OEM or aftermarket, whether the sink or counter has to come up to reach the part (a faucet swap on a drop-in sink is simple; on an undermount it can require releasing the sink), and whether the shutoff valves under the sink are working or seized. We give you a written price before any work starts, with the part and labor broken out, and that number does not change at the door. Every completed job is covered by the 365-Day Done Right Promise for a full year – if the work fails inside that window, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some of this you can safely check yourself. You can look under the sink for the model tag, confirm whether the shutoff valves turn, photograph the faucet, and check the disposal label. You can also dry the cabinet floor completely and watch for a slow drip after normal use.
Where DIY goes wrong on American Standard fixtures is at the cartridge and the disposal. A faucet cartridge swap looks simple until the retaining nut is seized from mineral scale – prying on it can crack the faucet body or twist the supply lines. A disposal should never be unjammed by hand with the unit plugged in; the motor can start while your hand is inside. If the hum continues after a proper power-down and reset, that’s a motor or winding failure, not a jam, and no amount of resetting will fix it. Leave the cartridge extraction and the disposal work to a trained technician – our technicians have up to 22 years of experience with exactly these fixtures.
If it feels like more than a part problem, we also install KraftMaid cabinets, Cambria and Silestone surfaces, and the full fixture package around them. Call (844) 343-6681 to schedule your free estimate.
FAQs

A quality American Standard faucet cartridge typically lasts 8 to 12 years in Los Angeles water; the faucet body itself often goes longer. Disposals generally run 8 to 10 years before the motor or flange gives out. When one part fails, we inspect the others on the same fixture so you’re not calling us twice.
Sometimes. A dripping American Standard faucet can often be fixed with a new cartridge rather than a whole new faucet, and a sprayer head can be swapped without touching the body. A humming disposal with a bad winding can’t be repaired – it gets replaced. We tell you which you’re looking at after we’ve seen the fixture.
A faucet cartridge or sprayer replacement is typically a one-visit job, under an hour once the part is on site. A disposal replacement is similar. Sink or counter-adjacent work can stretch the visit, and we say so before we start.
We confirm your exact model from the tag or measurements, then source the OEM cartridge or a quality aftermarket equivalent to that model before the visit. We don’t stock parts and we don’t carry them on a truck, so sourcing first means one trip instead of two.
Yes. Plumbing and electrical changes inside a kitchen remodel typically require permits in Los Angeles, and we pull them and schedule inspections. Fixture-for-fixture swaps may not require one; we check before we start and put it in writing.
Call (844) 343-6681 for an exact quote on your American Standard fixture or kitchen remodel – estimates are free, and a live person answers 24/7.
Schedule Your Los Angeles Kitchen Estimate
Whether you’ve got a failed American Standard faucet and want it replaced right, or a full kitchen remodel in Los Angeles that starts with the fixtures and works outward, we give you the price in writing before any tool comes out. Bradford Remodeling Co Los Angeles is an independent service provider, not affiliated with American Standard. Our technicians are background-checked and uniformed, our work is backed by the 365-Day Done Right Promise, and when we close out a job the site is clean, the scope is documented, and the signed written guarantee is in your hand. Call (844) 343-6681 for a free estimate.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












