A Bradford company - serving Los Angeles, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Delta · Los Angeles

Delta Kitchen Remodeling in Los Angeles, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Los Angeles
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A small remodeled galley kitchen with cabinets to the ceiling
A walk-in pantry with wood shelving
A low-threshold walk-in shower with a bench and grab bar
A finished basement family room with a media wall and wet bar
A powder room with botanical wallpaper and a stone sink
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Delta Kitchen Remodeling: The Los Angeles Owner’s Guide

We install Delta kitchen fixtures and handle the remodeling work around them in Los Angeles, and a full kitchen remodel here typically runs $16,520 to $53,100 installed, priced in writing before we start. When the Delta piece is the only thing failing, you’re usually looking at a repair or swap rather than a full remodel, and we’ll tell you which side of that line you’re on after we look.

Call (844) 343-6681

Delta is a fixture brand, not a cabinet or surface line, so most Los Angeles owners land here when a Delta faucet, sprayer, or soap dispenser fails in the middle of a kitchen update, or when a remodel plan calls for Delta fixtures and they want the whole scope priced honestly. The symptom picture is consistent: a faucet that drips at the base, a pull-down sprayer that won’t retract, or a rough-in that doesn’t line up with the new sink because the old Delta rough-in sits at a different spread than the replacement. If a fixture failure is what sent you here, we can quote the fixture swap and the surrounding work together so you’re not guessing at either number.

Which Delta Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Delta’s kitchen line runs from the entry-level foundations up through the designer series, and model families matter more than most homeowners expect. A Delta faucet that came with a standard 8-inch widespread rough-in won’t drop onto a single-hole mount without a deck plate, and the sprayer hose threads differ between older single-handle pull-outs and newer magnetic-docking models. The label on the underside of the faucet body or on the supply tag under the sink carries the model number; photograph it before you call anyone. If the label’s gone, measure the center-to-center spread of the mount holes and the height from deck to spout tip, and bring those numbers.

On the OEM-versus-aftermarket call, Delta-specific internal cartridges and diverter stems are worth buying genuine; the sealing geometry is what fails first, and knockoff cartridges tend to leak at the base within a year. Cosmetic pieces like escutcheons and handles can be quality aftermarket without trouble. We’re an independent service provider and not affiliated with Delta, so we source the part that matches your model and tell you plainly when genuine is the right call.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Delta Kitchen Remodeling Is Failing

  • A steady drip at the base of the spout. The cartridge seal has worn, usually from mineral buildup in Los Angeles’s harder water. It’s the most common Delta failure we see and rarely the faucet’s fault.
  • The pull-down sprayer won’t retract or seat. The hose weight has slipped or the docking magnet has lost its hold. A quick look under the sink tells you which.
  • Low flow at the aerator only. Sediment and scale collect at the screen. Unscrew it and flush, and you’ll usually know within a minute whether it’s the aerator or something deeper.
  • Water pooling around the base on the counter. The O-ring or the mounting nut underneath has loosened or cracked, and water is tracking back. Left alone, this can reach the cabinet substrate.
  • The handle turns but nothing happens. The stem or ball has stripped, and the valve needs a rebuild rather than a full replacement. Common on older Delta single-handle units.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A dining nook with a built-in banquette

A kitchen remodel in Los Angeles runs $16,520 to $53,100 installed. A smaller kitchen remodel sits at $10,620 to $23,600. When the Delta work is a fixture swap inside a larger project, cabinet installation is $4,720 to $15,340, countertop installation is $2,360 to $7,670, and backsplash installation is $945 to $2,950. Kitchen island installation is $3,540 to $11,800. The range moves on fixture grade, cabinet layout, and how much rough-in work the new sink and faucet require.

Every price we give is written before any work starts, with parts and labor broken out line by line so you can see what the Delta part costs versus the installation. Every completed project carries the 365-Day Done Right Promise: if the work fails inside a full year, we come back and correct it at no charge. Call (844) 343-6681 for an exact quote, free.

DIY or Call Us?

Some of this is safe to check yourself. You can photograph the model label, measure the mount spread, unscrew the aerator to flush it, and look under the sink at the hose weight and mounting nut. None of that involves water pressure you can’t shut off at the supply valve. What goes wrong for DIYers is the valve rebuild and the cartridge swap, where a cross-threaded cartridge or a nicked O-ring causes a slow leak that doesn’t show up for days and then warps the cabinet base. On a Delta rough-in feeding a new sink, the alignment and sealing work is where mistakes cost the most.

Our technicians have up to 22 years of experience on Delta and comparable fixtures, they’re background-checked and arrive uniformed, and a live person answers the phone 24 hours a day. If you’d rather not risk the drip, call (844) 343-6681.

FAQs

A home office with a built-in desk and shelves

How long does a Delta kitchen faucet or fixture last in Los Angeles? Most Delta kitchen fixtures hold up 10 to 15 years here, shorter in homes on harder water or with high daily use. The cartridge is usually what fails first, well before the body does.

Can it be repaired instead of replaced? Often, yes. A worn cartridge, a slipped hose weight, or a scaled aerator is a repair, not a replacement, and we’ll tell you which side you’re on after we look. If the body or the mounting surface is compromised, replacement is the better call.

How long does the swap take? A faucet or fixture swap is typically a couple of hours once the right part is on hand. A broader kitchen remodel runs longer, and we give you the timeline in writing with the price.

How do you source the Delta part? We match the model number from your label to the correct cartridge, stem, or fixture, and we tell you when genuine Delta is the right call versus a quality aftermarket equivalent. You’ll see the part cost itemized before we order.

We also service KraftMaid, Cambria, and Silestone products alongside Delta fixtures, so a kitchen update that touches several brands gets one written scope instead of three separate quotes. Call (844) 343-6681 for a free estimate.

Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A second-story addition that matches the existing rooflineA walk-in shower with large-format tile and a built-in nicheA remodeled family room with new windows and a window seatA wide opening with a new beam where the kitchen wall was removedA remodeled hall bathroom with subway tile and a floating vanityA remodeled primary suite with built-in wardrobes and a window seat

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Los Angeles

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Los Angeles team

A local vetted partner works across Los Angeles and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 343-6681
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Bradford Remodeling Co Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch