







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Blanco Kitchen Remodeling: The Los Angeles Owner’s Guide
We install Blanco-compatible kitchen components and handle full Blanco kitchen remodeling in Los Angeles at an installed range of $16,520 – $53,100 for a complete kitchen, with cabinet installation alone running $4,720 – $15,340. This page is built for the specific problem where a Blanco product you own has a failed or failing part, and you need it matched correctly, priced honestly, and installed by a crew that puts the price and the guarantee in writing before any work starts. Bradford Remodeling Co Los Angeles is an independent service provider and is not affiliated with Blanco.
Most owners land here after a slow discovery: a cabinet hinge that no longer holds the door square, a pull-out mechanism that grinds halfway open, or a sink accessory that stopped seating flush. In older Los Angeles kitchens – the pre-war bungalows in Angelino Heights, the 1960s ranchos across the Valley – we often find Blanco hardware working against cabinet boxes that have swelled from years of dry heat and seasonal moisture swings, and the part fails before the wood does.
Key Takeaways
- Full Blanco kitchen remodeling in Los Angeles: $16,520 – $53,100 installed.
- Cabinet installation on its own: $4,720 – $15,340.
- Countertop installation: $2,360 – $7,670; backsplash: $945 – $2,950.
- Every price is written before work starts, and every finished job carries the 365-Day Done Right Promise.
- A live person answers the phone 24/7 at (844) 343-6681.
Which Blanco Models This Applies To

Blanco builds kitchen products across several lines, and the part you need depends on which one you have. Their sink lines (including the Diamond, Valea, and Precis families) use different mounting clips, drain fittings, and accessory rails by series. Their faucet lines (Empressa, Liven, and others) use cartridges that change by generation even within the same model name. Cabinet hardware and pull-out organizers follow their own spec tables. The single biggest compatibility mistake we see in Los Angeles is ordering a part by model name alone: a “Precis” from one production run can take a different drain assembly than the same name three years later.
To identify the right part, pull the label. Sinks carry a sticker or stamped mark on the underside or the side wall of the bowl with the model number and, on many units, a production code. Faucets have a model plate under the base or on the supply shank. If the label is gone, measure and photograph: bowl dimensions front-to-back and side-to-side, drain hole diameter, and the configuration of mounting clips. Those measurements, sent with clear photos, let us match the correct part rather than guess.
The OEM versus aftermarket decision matters more on Blanco than on generic hardware. Genuine Blanco parts carry the manufacturer’s fitment spec and finish match. Quality aftermarket equivalents cost less and are fine for drain baskets, strainers, and some clips, but we don’t substitute aftermarket on the visible finish pieces or on cartridge assemblies where a slight dimensional difference shows up as a drip six months later. When we quote, we tell you which side of that line the part falls on and why.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Blanco Kitchen Remodeling Is Failing
Owners usually notice one symptom first, then find two more once they start looking. Here’s what each one means.
- Water pooling around the drain or under the sink base. The drain assembly or the strainer seal has hardened or cracked. In Los Angeles, hard water and years of heat cycling dry out rubber gaskets faster than most people expect, and the leak often starts small enough to go unseen until the cabinet floor stains.
- A faucet that drips at the spout when shut off. The cartridge has worn. This is the most common faucet failure we correct, and it’s usually the cartridge alone, not the whole faucet.
- Cabinet doors that hang crooked or won’t stay closed. A hinge has lost tension or the mounting screws have pulled from the box. On older boxes, the wood behind the hinge plate has softened, so a new hinge alone won’t hold – the substrate needs attention too.
- A pull-out or organizer that binds or derails. The slide mechanism has worn or the mounting has shifted out of square. This one gets worse quietly because people stop using the drawer instead of fixing it.
- Surface pitting, dulling, or a finish that no longer cleans up. The finish layer has worn through. On sinks and faucets this is cosmetic at first, but exposed base metal corrodes faster once the protective finish is gone.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed Blanco-compatible kitchen remodeling in Los Angeles runs $16,520 – $53,100 for a full kitchen. If you’re replacing one component at a time, these are the real line-item ranges we write on the quote:
| Scope | Installed range |
|---|---|
| Full kitchen remodel | $16,520 – $53,100 |
| Small kitchen remodel | $10,620 – $23,600 |
| Cabinet installation | $4,720 – $15,340 |
| Countertop installation | $2,360 – $7,670 |
| Backsplash installation | $945 – $2,950 |
| Kitchen island installation | $3,540 – $11,800 |
What moves the number up or down: cabinet box condition, whether the countertop has to come off to reach the part, and whether the rough-in needs correcting. Parts and labor are itemized separately so you see what the part costs and what the install costs. Every price is written before work starts, with no numbers that move at the door. The finished work carries the 365-Day Done Right Promise: if it fails within that year, we come back and correct it at no charge, and you hold the signed written guarantee. If your project also touches cabinetry or surfaces, we work with documented brands including KraftMaid, Cambria, and Silestone.
DIY or Call Us?
Some of this is safe to check yourself. You can pull the model label, photograph the part, measure the bowl and drain hole, tighten a visibly loose hinge screw, and dry the area under the sink to see where water is actually coming from. Those steps cost nothing and they make the quote accurate.
Where DIY goes wrong: replacing a faucet cartridge without shutting off and verifying the supply, reseating a drain assembly on a sink you can’t fully support from underneath, and pulling a cabinet box apart to reach a slide. Under-sink work in older Los Angeles homes also runs into corroded shutoff valves that won’t fully close; forcing one turns a small job into a water damage call. If a valve feels stuck, stop and call us. Estimates are free, and (844) 343-6681 is answered by a live person 24/7, not a voicemail or a callback queue.
FAQs

Most Blanco sinks and faucets last 10 to 15 years, with cartridges and drain seals needing replacement several years before the fixture itself. Los Angeles heat and water hardness shorten the seal life, so budget for one cartridge or gasket swap in that window. Call (844) 343-6681 for an exact quote – estimates are free.
Often yes. A faucet cartridge, drain seal, or hinge can be replaced on its own and the original fixture kept, which is the lower-cost path when the body and finish are sound. Once a finish has worn through to base metal or a cabinet box has swelled, replacement wins. We’ll tell you which case you’re in. Call (844) 343-6681 and we’ll price both.
A cartridge, drain assembly, or single organizer replacement is typically done in a single visit of a couple hours. A cabinet installation or countertop swap runs longer and gets scheduled in writing. We confirm the timeline on the quote so there are no surprises. Call (844) 343-6681 to schedule your free estimate.
We match by model number and, when the label is missing, by measured dimensions and photographs sent to the supplier. That model-plus-measurement approach is what keeps a same-name part from fitting the wrong production run. Our technicians have up to 22 years of experience with this match work. Call (844) 343-6681 for an exact quote – estimates are free.
Bradford Remodeling Co Los Angeles handles Blanco-compatible kitchen work across Los Angeles with a written price before any tool comes out, background-checked uniformed technicians, and the 365-Day Done Right Promise on every finished job. Call (844) 343-6681 for a free estimate.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












