A Bradford company - serving Los Angeles, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
Moen · Los Angeles

Moen Home Additions & ADU in Los Angeles, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Los Angeles
A walk-in shower with large-format tile and a built-in niche
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A low-threshold walk-in shower with a bench and grab bar
A powder room with botanical wallpaper and a stone sink
A wide opening with a new beam where the kitchen wall was removed
A stone counter, tile backsplash and open shelf after a kitchen remodel
A remodeled primary suite with built-in wardrobes and a window seat
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Moen Home Additions & ADU: The Los Angeles Owner’s Guide

Quick answer: A home addition in Los Angeles typically runs $53,100 to $153,400, and a detached or attached ADU runs $106,200 to $259,600. When Moen fixtures (rough-in valves, shower trims, bath spouts, ADA grab bars) are part of the plan, the specification happens before framing, not after. We install to a written scope with the part numbers locked in, and Moen products are on our documented materials roster. Jobs are planned, not same-day; these are months-long builds with permits, inspections, and a real schedule you approve in writing.

Call (844) 343-6681

Most owners discover a Moen problem in one of two ways. Either a rough-in valve in an existing bathroom starts seeping inside the wall and the drywall tells you first, or a trim kit you bought to finish a new ADU bath doesn’t thread onto the valve the framer set. The second is more common than people expect, and it’s why we match fixtures to rough-ins before the walls close.

Bradford Remodeling Co Los Angeles is an independent service provider. We’re not affiliated with Moen, but Moen is one of the fixture brands we install on additions and ADUs across Los Angeles.

Which Moen Models This Applies To

A tile setter installing wall tile in a shower

Moen’s residential line breaks into a few families you’ll actually see on an addition or ADU spec sheet. Moen 1222 and 1225 are the classic single-handle cartridge valves, still everywhere in older Los Angeles homes. The 1200/1222 series is the one most owners inherit. On newer ADU builds, you’re more likely working with Moen’s M-CORE rough-in system, which uses a separate rough-in valve and a trim that snaps on at the end. That two-part system is convenient right up until someone buys the wrong trim for the valve in the wall.

Here’s the compatibility gotcha worth knowing: Moen’s M-CORE rough-in valves come in different connection types and port configurations, and the trim you pick has to match the rough-in you installed, not the other way around. If your plumber set a 3-port M-CORE valve because the ADU bath has a shared shower and handshower, a single-function trim won’t cover it. The number on the valve body is the one that matters.

To identify your part, look at three places. The cartridge pulls out and has a number stamped on the brass. The rough-in valve body is labeled inside the wall access or on the plastic cap. And the trim’s model plate is usually inside the handle cover. Photograph all three before you order anything.

OEM versus aftermarket is a real decision with Moen. Genuine Moen cartridges carry Moen’s lifetime limited warranty on the cartridge itself, which matters on a bath you’re building to last. Quality aftermarket equivalents (Danco, for example) run a third of the price and are fine for a rental turnover or a quick fix, but they don’t inherit the Moen warranty. On an ADU you’ll own for decades, the OEM part is the one we specify.

For cabinetry and surfaces on the same job, we also install KraftMaid, Cambria, and Silestone. Those get specified the same way: part numbers in writing before we order.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Moen Home Additions & ADU Is Failing

  • Water weeping from behind the shower wall or at the valve plate. That’s usually the 1222 cartridge seal going. The symptom looks like a small drip; the cause is a hardened O-ring that no longer seats against the valve bore.
  • The handle turns with no resistance or won’t hold temperature. The cartridge’s internal stops have worn. On a Moen single-handle, the handle drifting back toward cold on its own is the tell, and it means the balancing spool is done.
  • Water comes out of both the tub spout and the showerhead at once. On a tub-shower valve, the diverter or the cartridge’s diverter port has failed. On new ADU builds this often traces to the wrong trim being installed on the rough-in.
  • Low flow with a known-good supply. The cartridge inlet screens or the balancing spool are clogged with Los Angeles’s hard water scale. Our water runs mineral-heavy, and a cartridge that’s five to seven years old will show it.
  • The trim won’t seat flush to the finished wall. That’s not a trim defect; it’s a rough-in depth problem. The valve was set too deep or too shallow for the wall thickness, and it has to be corrected at the valve, not shimmed at the plate.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled laundry and mudroom with a bench, cubbies and painted cabinets

Parts-plus-labor for a Moen cartridge swap in Los Angeles typically lands in the few-hundred-dollar range, and we quote it as a written line item: the part price, the labor, and the trip. No number that moves at the door.

Where this ties into the bigger build:

  • Bathroom Remodel: $10,620 to $33,040
  • Small Bathroom Remodel: $5,900 to $14,160
  • Walk-In Shower Installation: $5,310 to $14,160
  • Home Addition: $53,100 to $153,400
  • ADU Construction: $106,200 to $259,600
  • Garage Conversion: $35,400 to $94,400

What drives the range on an ADU or addition is the permit scope, the rough-in complexity (how many fixture families and valves), the substrate and waterproofing, and the finishes. A standard Moen shower trim on a drywalled wall is at the low end of a shower install; a full walk-in with a curbless pan and a handshower is at the high end. Every project gets the written price before a single tool comes out, and every completed job carries our 365-Day Done Right Promise, a full written guarantee: if the work fails within that year, we come back and correct it at no charge.

DIY or Call Us?

You can safely check a few things: shut the water off, remove the handle and trim plate, and photograph the cartridge and the number stamped on it. You can also confirm the rough-in depth and the valve model if there’s an access panel. Swapping a cartridge on a functioning shut-off valve is often a reasonable owner job.

Where it goes wrong: if a valve has been seeping into the wall, the substrate and framing behind it may be saturated, and a new cartridge on a corroded bore just leaks again in a different spot. On a multifamily or new ADU, pulling and re-setting a rough-in valve is a permit-and-inspection item, and doing it yourself can invalidate the inspection. We also see owners buy a trim before confirming the valve, then discover the return window closed while the drywall went up.

Call (844) 343-6681 and a live person answers, day or night. We’ll price the part and the labor in writing before anything starts.

FAQs

A finished backyard cottage with a small covered porch

How long does a Moen cartridge last in Los Angeles? Most Moen 1222 cartridges last five to ten years here. Los Angeles’s mineral-heavy water accelerates O-ring wear, so homes on the harder side of the basin see the low end of that range. The cartridge is also the first thing to check when a Moen valve starts weeping.

Can it be repaired instead of replaced? Often, yes. A cartridge, O-rings, and a balancing spool are the replaceable wear parts, and a repair is cheaper than a full valve swap. But if the valve bore itself is corroded or pitted, the repair won’t hold, and the valve has to come out. We check the bore before recommending either path.

How long does the swap take? A single cartridge replacement is a couple of hours including the diagnosis. A rough-in valve swap that involves opening and closing the wall is a day or more depending on tile and the access route. On an ADU or addition, the fixture work is scheduled inside the larger build, so it’s on the written timeline, not a surprise.

How do you source the part? We work from a documented roster of brands, Moen included, so the part number is matched to your valve and written into the scope. We don’t claim to carry stock or parts on a truck. We source the correct part for your model, and if it’s the wrong one for your rough-in, we catch that before ordering rather than after the walls go up.

Every Bradford project, from a single Moen fix to a full Los Angeles ADU, comes with the written price up front, background-checked, uniformed technicians on the job, and the 365-Day Done Right Promise behind the completed work. Bradford Remodeling is part of the Garrison Partners family, held to The Garrison Standard on every Los Angeles County project. Our technicians have up to 22 years of experience.

Call (844) 343-6681 for a free estimate on your Moen addition or ADU work. We’ll put the price and the guarantee in writing before we start.

Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
New painted shaker cabinets with an organized deep drawerA remodeled staircase with wood treads and a slim metal railingA small remodeled galley kitchen with cabinets to the ceilingA finished basement family room with a media wall and wet barA walk-in pantry with wood shelvingA remodeled living room with built-in shelves around the fireplace

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Los Angeles

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Los Angeles team

A local vetted partner works across Los Angeles and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 343-6681
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Bradford Remodeling Co Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch