A Bradford company - serving Los Angeles, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
K
Kohler · Los Angeles

Kohler Home Additions & ADU in Los Angeles, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Los Angeles
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A low-threshold walk-in shower with a bench and grab bar
A powder room with botanical wallpaper and a stone sink
A wood double vanity with two mirrors after a bathroom remodel
A finished backyard cottage with a small covered porch
A remodeled living room with built-in shelves around the fireplace
A single-story rear room addition with tall windows and a new patio
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Kohler Home Additions & ADU: The Los Angeles Owner’s Guide

Home additions and ADUs built around Kohler fixtures run roughly $53,100 to $153,400 in Los Angeles for a home addition, and $106,200 to $259,600 for a full ADU, priced in writing before any work starts. The “part” here is rarely a plumbing cartridge failing on a Tuesday morning. It’s the slower realization that a planned addition or ADU touches every Kohler fixture at once: the shower valve rough-in, the toilet fill valve, the kitchen faucet supply. We install and coordinate all of it. Bradford Remodeling Co Los Angeles is an independent contractor, not affiliated with Kohler, and we work with the fixtures a homeowner already owns or specifies.

Call (844) 343-6681

Key Takeaways

  • An addition or ADU in Los Angeles means roughing in several Kohler fixtures at once, not one repair.
  • Kohler rough-in valves are model-specific; the cartridge or trim kit has to match the valve body already in the wall.
  • Every project gets a written price before work begins and the 365-Day Done Right Promise on completion.
  • Our technicians have up to 22 years of experience with fixture rough-in and finish work.

Which Kohler Models This Applies To

A tile setter installing wall tile in a shower

Kohler fixture families carry their own compatibility rules, and the ones we see most in Los Angeles homes are the Rite-Temp shower valves, the high-line and Memoirs toilet series, and the kitchen faucet lines built around ceramic disc cartridges. The trap with additions and ADUs is that the rough-in valve body goes into the wall during framing, and the trim kit that finishes it must match that exact valve. Swap a trim onto the wrong valve and it wobbles loose or leaks behind the tile.

To identify what you have, look for the model or serial label: on toilets it’s behind the tank or on the inside of the bowl rim; on shower valves it’s printed inside the escutcheon plate or on the valve body behind the trim. Photograph the label and the fixture. For additions, the practical decision is OEM Kohler parts for anything behind a wall you won’t open again, and quality aftermarket for exposed parts like supply lines and stops where the spec is standard. Kohler’s own finish and cartridge tolerances are tighter than most aftermarket clones, and the difference shows up in five or six years, not five or six days.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Kohler Home Additions & ADU Is Failing

In the context of a planned addition or ADU, “failing” usually means an existing fixture or rough-in is about to be capped, moved, or extended, and the warning signs are already there. Watch for these:

  • Slow or dripping shower valve. A Rite-Temp pressure-balance cartridge that’s scaled or worn lets water past the seat. In Los Angeles’s hard water, that cartridge often needs attention every four to six years, not the ten owners expect.
  • Toilet running between flushes. The fill valve or flapper is leaking-by. If the tank refills on its own in the middle of the night, the flapper seat is the usual culprit.
  • Faucet drips from the spout with the handle closed. The ceramic disc cartridge has scored or picked up grit. Left alone, it wears the seat and turns a cartridge swap into a faucet replacement.
  • Water staining or soft drywall near a fixture. A supply line or valve body connection is weeping where it meets the rough-in. In a framed addition this is the one you don’t wait on.
  • Loose or wobbling trim. The escutcheon or trim plate has lost its seal against the tile. Silicone or plaster behind it has given way, which usually points to a valve body that shifted during framing.

Replacement Cost & What’s Included

A garage converted into a guest room and home office

Fixture and parts replacement within an addition or ADU is the small line item next to the structure. Here’s how the totals land in Los Angeles, with parts and labor together:

Scope Installed price range
Home addition (fixtures, rough-in, finish) $53,100 – $153,400
ADU construction (fixtures, rough-in, finish) $106,200 – $259,600
Garage conversion (fixtures, rough-in, finish) $35,400 – $94,400

What drives the range: number of fixtures, whether walls are already closed, whether the rough-in valve body has to move, and whether the Kohler trim or cartridge you want is a current spec or a discontinued line that has to be sourced. You get a written line-item price before any work starts, and the finish work carries the 365-Day Done Right Promise: if the install fails inside a full year, we return and correct it at no charge.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Some of this is genuinely owner-safe and some is not. You can photograph labels, shut off the fixture’s supply stop under the sink or at the wall, tighten a loose escutcheon, and replace a toilet flapper or fill valve on an exposed tank. Those are simple, low-risk, and don’t touch the wall.

The rough-in is different. Shower valves and anything behind tile or inside a wall are not a good DIY project: you’re opening substrate, and a bad connection behind a finished wall means water in the framing and a re-tear-out. For additions and ADUs, the rough-in gets inspected and the fixture has to close out cleanly. That’s the line where we take over. Call (844) 343-6681 for a free estimate, and we’ll tell you straight whether you’re looking at a cartridge swap or a rough-in move.

FAQs

New painted shaker cabinets with an organized deep drawer

Contact Bradford Remodeling Co Los Angeles

If a Kohler fixture is showing its age before your addition or ADU breaks ground, or you want the whole scope priced in writing, call (844) 343-6681 for a free estimate. A live person answers, 24/7. Our technicians have up to 22 years of experience, work background-checked and uniformed, and leave the site squared away: clean, documented scope, and the signed 365-Day Done Right Promise in your hand before we close the job.

Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A wide opening with a new beam where the kitchen wall was removedA stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled primary suite with built-in wardrobes and a window seatA remodeled staircase with wood treads and a slim metal railingA small remodeled galley kitchen with cabinets to the ceilingA finished basement family room with a media wall and wet bar

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Los Angeles

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Los Angeles team

A local vetted partner works across Los Angeles and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 343-6681
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Bradford Remodeling Co Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch