







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Home Additions & ADU: The Los Angeles Owner’s Guide
We build Cambria-spec home additions and ADUs across Los Angeles, and installed projects here typically run $53,100 – $153,400 for home additions and $106,200 – $259,600 for a full ADU. Cambria is a quartz surface brand, so the “part” in your project is usually the countertop, island top, or vanity slab inside the addition – and when one fails, you find out the way most owners do: a crack spidering out from a sink cutout, a seam that opens a hairline gap, or a slab that pops loose from its substrate months after install.
That failure almost never comes from the quartz itself. It comes from the substrate, the adhesive, or a cutout placed too close to an edge. We’re an independent service provider, not affiliated with Cambria, and we’ll tell you plainly what’s worth repairing and what’s worth replacing. Call (844) 343-6681 for a written price before any work starts.
Which Cambria Models This Applies To

Cambria sells quartz slabs, not appliances, so there’s no serial plate to match. The “model” is the slab design – think of Cambria’s named collections like Ella, Brittanicca, and Skokiaan – and the compatibility question is really about thickness and edge profile. Cambria standard slabs come in 2 cm and 3 cm thickness, and the 3 cm spec changes everything downstream: cabinet rail height, dishwasher clearance, and whether your existing island base can carry the weight without a new substrate.
Here’s the compatibility gotcha owners miss. If you’re matching a new top to an existing Cambria counter, dye lots and veining vary between production runs, so a “matching” slab ordered today can read visibly different in daylight. Bring the actual sample to your kitchen, not the showroom.
On OEM vs aftermarket: Cambria is a brand you specify, not a part you swap for a clone. A quality quartz alternative – we work with Silestone and Caesarstone too – can match the look, but the warranty terms and fabrication tolerances differ. We fabricate and install to the manufacturer spec and document every cutout and seam location in your written scope.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambria Home Additions & ADU Is Failing
Quartz is dense and non-porous, so when something goes wrong, the symptom points to the install. Here’s how we read it.
- Cracks radiating from a sink or cooktop cutout. Cutouts set too close to an edge or corner concentrate stress, and a crack starts there. It’s a fabrication spacing issue, not a defect in the stone.
- A seam that opens or feels proud under your fingertip. Adhesive failure or movement in the substrate below. In Los Angeles, slab-on-grade floors and older wood subfloors both flex slightly, and the seam takes the hit.
- Top feels loose or rocks when you press near an edge. The bonding to the cabinet base has let go. Often the substrate wasn’t flat or moisture got underneath.
- Chips along the front edge. Usually impact damage to an eased or bullnose edge. Small chips can be refinished; a chipped corner over 2 inches needs a fabricator.
- Staining or cloudiness at the surface. Genuine quartz resists staining, so this usually means the slab wasn’t quartz – or the finish was damaged by an abrasive cleaner. Worth a close look before you order a replacement.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed Cambria-compatible work in Los Angeles runs within these bands. Every number below is a written price before work starts – no numbers that move at the door.
| Item | Installed range (Los Angeles) |
|---|---|
| Home Addition (full project) | $53,100 – $153,400 |
| ADU Construction | $106,200 – $259,600 |
| Garage Conversion | $35,400 – $94,400 |
| Countertop Installation (Cambria or equivalent) | $2,360 – $7,670 |
| Kitchen Island Installation | $3,540 – $11,800 |
| Bathroom Vanity Installation | $945 – $3,540 |
The range hinges on square footage, slab selection, cutout count, edge profile, and whether the cabinet substrate needs rebuilding. Parts and labor are itemized separately in your quote. We pull permits and pass inspections on the addition work, and the 365-Day Done Right Promise backs every completed project: if the work fails inside that full year, we come back and correct it at no charge.
DIY or Call Us?
You can safely check whether a top is loose by pressing a rag-wrapped palm on the surface, and you can photograph a crack to send us. That’s where DIY should stop.
Quartz slabs weigh 15 – 20 pounds per square foot, and a 3 cm island top can run 300 pounds. Lifting one off a base without a two-person crew and a proper carry is how people get hurt and how slabs snap. Adhesive and seam work also need fabricator tools and clamping time. This is not a Saturday project.
Cambria is a documented brand in our material roster – the same is true of KraftMaid, Silestone, and Kohler when they show up in the same job. We give you a written price before any work starts, and a live person answers the phone 24/7. Call (844) 343-6681 to schedule a free estimate.
FAQs

How long does Cambria quartz last in a Los Angeles addition? Cambria quartz typically lasts 15 – 25 years or more when installed correctly, and the slab itself rarely fails – the substrate and seams below it are what give out first. Our technicians have up to 22 years of experience reading those failure points. Call (844) 343-6681 for an exact quote – estimates are free.
Can a cracked Cambria counter be repaired instead of replaced? Yes, a small chip or a short crack near an edge can often be refinished or filled on site, but a crack running across a cutout usually means replacement. We’ll tell you which one you’re looking at in the written scope. Call (844) 343-6681 – estimates are free.
How long does a countertop swap take? A standard kitchen countertop replacement takes 1 – 3 days once the slab is templated and fabricated, and template-to-install usually runs 1 – 2 weeks because fabrication is done off-site. Addition work runs longer and is scheduled in the written scope. Call (844) 343-6681 for your timeline.
How do you source the Cambria part? We source through fabricators held to Cambria’s manufacturer spec and document the slab, thickness, and seam plan in your quote, so specifications are traceable. We don’t stock or carry parts – every slab is ordered for your job. Call (844) 343-6681 to schedule a free estimate.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












