







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Driveway & Pavers: The Los Angeles Owner’s Guide
We install and repair driveway and paver systems built around KraftMaid-specified hardscape packages, and in Los Angeles the typical installed range runs from $8,260 to $21,240 for a paver driveway and $4,130 to $12,980 for a paver patio. If you’re calling about a failed joint, a sunken corner, or pavers that have heaved out of plane, we can usually walk you through what’s wrong and what the fix costs on the same call. Bradford Remodeling Co Los Angeles is an independent service provider and is not affiliated with KraftMaid.
Most Los Angeles owners don’t discover a hardscape failure all at once. It starts with a hairline crack in the mortar joint near the garage apron, or a paver in the walkway that rocks when you step on it. By the time water is pooling against the foundation after a rain, the substrate underneath has usually been moving for a season or two.
Key Takeaways
- Installed paver driveway work in Los Angeles runs $8,260 – $21,240; patio work runs $4,130 – $12,980.
- KraftMaid hardscape specs follow series-specific paver dimensions and joint widths. Matching the wrong series is the most common compatibility mistake.
- We give a written price before any work starts. No numbers that move at the door.
- Every completed installation carries the 365-Day Done Right Promise. If the work fails inside that window, we come back and correct it at no charge.
Which KraftMaid Models This Apply To

KraftMaid hardscape packages are tied to specific series and dimension specifications, and the part you need depends entirely on which series your home was built to. The three things we check first:
- Series label. KraftMaid paver series are stamped or molded on the underside of a loose paver or on the packaging band of the original install. If the label is gone, the paver’s nominal dimensions are the next identifier.
- Nominal dimensions. KraftMaid driveway pavers typically run in standard modular sizes (roughly 4×8, 6×9, or 12×12 inches nominal). Measure length, width, and thickness to the sixteenth of an inch, not the quarter. A 60mm paver and a 80mm paver look identical from above and won’t interchange under load.
- Joint width. KraftMaid specs a specific joint gap for polymeric sand. Widening the joint to fit a substitute paver is how a repairable section becomes a full replacement.
On the OEM-versus-aftermarket question: an OEM KraftMaid paver keeps the color, texture, and dimension exact, which matters on a visible driveway or front walkway. A quality aftermarket paver matched to the same spec works fine in a hidden area or a utility strip behind the garage. We source either, and we tell you which is right for your specific location before you decide.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Driveway & Pavers Is Failing
Los Angeles weather creates its own failure patterns. Dry summers followed by winter rain push water into every open joint, then the shrink-swell cycle of our clay-heavy soils lifts and settles sections in ways you won’t see in wetter climates. Here are the five symptoms we see most:
- Rocks when you step on it. A paver that moves underfoot means the bedding sand or base layer has washed out underneath. Left alone, the edges of neighboring pavers chip and the failure spreads.
- Heaving or sunken sections. The whole run is out of plane. In Los Angeles this is usually poor base compaction or a drainage path that dumps water under the driveway instead of away from it.
- Hairline cracks in mortar joints. The joint material is failing before the pavers are. Often a sign the polymeric sand was applied too thin or the joint was never cleaned out properly before the install.
- Efflorescence (white powdery film). Mineral salts migrating to the surface. Usually a moisture problem underneath, not a surface stain you can scrub away.
- Weeds growing through joints. Polymeric sand has eroded. When the joints stay open, water gets in and the whole system starts to move.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what installation runs in Los Angeles, broken down by scope:
| Work | Installed Range |
|---|---|
| Paver driveway installation | $8,260 – $21,240 |
| Paver patio installation | $4,130 – $12,980 |
| Driveway replacement | $5,900 – $16,520 |
| Concrete driveway installation | $5,310 – $14,160 |
| Driveway sealing | $295 – $825 |
What drives the range: total square footage, whether the existing base has to be excavated and recompacted or can be reused, the paver series and thickness, and access (a narrow side yard or a steep Los Angeles hillside driveway adds labor). Parts and labor are itemized on the written quote. Every installation is covered by the 365-Day Done Right Promise. If the joint fails, or a section heaves inside that window, we come back and correct it at no charge.
DIY or Call Us?
What you can safely check yourself: measure a single paver for thickness and nominal dimensions, photograph the joint width, and note where the water pools after a rain. That’s a five-minute look that helps us quote accurately. What you shouldn’t tackle yourself is the base excavation and compaction. Getting base prep wrong is the number one reason new pavers fail within two years, and it’s not visible from above until the pavement starts to move. A driveway or patio failure is also a fall hazard, and lifting pavers without a proper base underneath creates a worse trip risk than the one you had before. If you’re not sure, call (844) 343-6681. We’ll tell you honestly whether you’re looking at a spot repair, a resealed section, or a full replacement.
FAQs

How long should KraftMaid pavers last in Los Angeles?
Twenty to thirty years is realistic in Los Angeles when the base was prepped and compacted to spec and joints are maintained. UV exposure and clay-soil movement are the main long-term stresses. Re-sealing every two to three years extends the joint life significantly.
Can a failing paver section be repaired instead of replaced?
Yes, in most cases. A localized joint failure or a single sunken section can usually be lifted, the base recompacted, and the pavers re-set with new polymeric sand, at a fraction of full replacement cost. If the problem is a base failure across the whole driveway, spot repair will keep recurring and replacement is the honest answer.
How long does a paver repair or replacement take?
A spot repair is finished in a day. A full driveway replacement typically runs three to five working days, depending on square footage and how deep the base excavation goes.
How do you source the right KraftMaid-compatible part?
We identify the series by nominal dimensions and any surviving label, and we work with a documented roster of premium brands including Belgard and Unilock where OEM KraftMaid isn’t available. You get the spec in writing before work starts, so you know exactly which paver you’re getting. We also install Cambria, Silestone, and Kohler for interior projects.
Ready to get this squared away? Call (844) 343-6681 for a free estimate. A live person answers 24/7. You’ll get a written price before any work starts, background-checked technicians on the job, and the 365-Day Done Right Promise backing every installation.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












