A Bradford company - serving Los Angeles, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
KraftMaid · Los Angeles

KraftMaid Fence Installation in Los Angeles, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Los Angeles
A small remodeled galley kitchen with cabinets to the ceiling
A walk-in pantry with wood shelving
A remodeled kitchen with a waterfall island and wood cabinets
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
A wood double vanity with two mirrors after a bathroom remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

KraftMaid Fence Installation: The Los Angeles Owner’s Guide

KraftMaid fence installation is not a KraftMaid product line. KraftMaid builds cabinetry, and it does not manufacture fencing, gates, or exterior millwork. If you’ve arrived here looking for a KraftMaid-labeled fence part, the honest answer is that there isn’t one to find. What exists is a mismatch, and it happens to Los Angeles homeowners in one of two ways: either a fence was installed against KraftMaid cabinetry specs that don’t belong outdoors, or a fence project was quoted with KraftMaid-branded materials it can’t actually supply. Installed fencing of the kind most Los Angeles properties need – vinyl, aluminum, or composite – typically runs $4,130 – $10,620 for a standard residential run. This page explains how the confusion gets made, what a failing fence actually costs to correct, and how to get a written price before anyone touches a post. Bradford Remodeling Co Los Angeles is an independent service provider and is not affiliated with KraftMaid.

Call (844) 343-6681

Key Takeaways

  • KraftMaid does not make fencing. Any listing or quote that names a KraftMaid fence part is either mislabeled or a spec mix-up.
  • A failed fence in Los Angeles is usually a materials or footing problem, not a “part” problem, and it shows up as leaning posts, rust bleed, or gate sag.
  • Our technicians have up to 22 years of experience, and every fence project gets a written price before work starts.
  • Every completed project carries the 365-Day Done Right Promise.

Which “KraftMaid” Fence Specs Actually Apply

Installers leveling a new base cabinet during a kitchen remodel

Here’s the compatibility reality. KraftMaid cabinet lines – the Wilton, Marquee, and Passage series among them – are engineered for interior climate: controlled humidity, stable temperature, no direct sun, no rain. Those same material specs get quoted into exterior projects by mistake because a homeowner asks for “the KraftMaid brand everywhere,” and a supplier either accepts the request without correcting it or quietly substitutes. Neither outcome is good.

If you’re trying to identify what you actually have, start at the fence itself rather than at a cabinet label. Look for a manufacturer stamp on the rails, post caps, or gate hardware. Vinyl runs usually carry a profile code on the bottom rail. Aluminum runs carry a mill mark near the hinges. Composite carries a colorbatch stamp on the underside of a picket. Measure post spacing, rail height, and panel width before you price anything, because a 6-foot panel and a 6-foot panel with a top cap are different orders.

On the OEM-versus-aftermarket question: because KraftMaid doesn’t make fences, there’s no OEM fence part to chase. For the cabinets themselves we work from a documented roster of KraftMaid, Wellborn, Cambria, Silestone, and Kohler products so specifications stay traceable. For fencing, we specify by profile and material grade, not by a cabinet brand name that doesn’t apply outdoors.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Los Angeles Fence Is Failing

Fencing doesn’t fail on a schedule. It fails from a specific cause, and Los Angeles conditions – dry summers, the occasional heavy winter rain event, and clay-heavy soils in pockets of the basin – push certain failures faster than others. Here’s what to look for.

  • Posts leaning after rain. Almost always a footing problem. Posts set too shallow or without proper concrete depth shift when saturated clay soil expands and contracts. A leaning post is a structural warning, not a cosmetic one.
  • Rust bleeding at hinges and fasteners. Standard steel hardware gives up in coastal and near-coastal Los Angeles air. Stainless or coated fasteners are the fix, and it’s worth specifying them up front.
  • Gate sagging and dragging. The hinge post is carrying the gate’s weight and the ground has moved under it. Gate sag after two or three seasons usually means the post needs re-setting, not a new hinge.
  • Vinyl panels cracking along rail lines. UV exposure in Los Angeles is brutal on low-grade vinyl. Cracks along the rail groove indicate a thinner-wall profile than the span calls for.
  • Loose or missing pickets after wind. Fastener pull-out from a fence that was assembled with the wrong fastener for the material. It reads as a quality failure because it is one.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included in Los Angeles

A garage converted into a guest room and home office

Fence installation in Los Angeles runs $4,130 – $10,620 for a standard residential run. What moves you up or down that range is linear footage first, then material, then site conditions – slope, hardscape demolition, gate count, and whether the old fence has to be hauled off.

  • Vinyl fence installation: $4,130 – $10,620
  • Aluminum fence installation: $4,720 – $11,800

That price covers removal of the old run, footing work, posts, panels, gate hardware, and cleanup. It does not cover permits if your property requires them – we tell you before work starts which is which. You get a written, line-item price before a single tool comes out. No numbers that move at the door. And the finished work is covered by the 365-Day Done Right Promise: if the fence fails within a year, we come back and correct it at no charge.

DIY or Call Us?

Some of this you can check yourself. Walk the fence line after a rain and look for post lean, push on each gate to feel for play in the hinge post, and check fasteners for rust or pull-out. That diagnostic costs you nothing and tells you whether you have a repair or a replacement on your hands.

What we don’t recommend is DIY footing work on a post that’s already failed. Digging out and re-setting a footing on a shared or property-line fence involves depth, concrete volume, and grading decisions that go wrong quietly – the post looks fine for one season and leans again the next. On sloped Los Angeles lots, it’s worse. That’s the part to hand off. Call (844) 343-6681 for a free estimate, and we’ll tell you straight whether you need a repair or a full replacement.

FAQs

A remodeled hall bathroom with patterned floor tile and painted walls

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled living room with built-in shelves around the fireplaceA single-story rear room addition with tall windows and a new patioA freestanding soaking tub in a remodeled primary bathroomA whole-home remodel with the living, dining and kitchen areas opened upA second-story addition that matches the existing rooflineA walk-in shower with large-format tile and a built-in niche

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Los Angeles

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Los Angeles team

A local vetted partner works across Los Angeles and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 343-6681
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Bradford Remodeling Co Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch