







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
James Hardie Kitchen Remodeling: The Los Angeles Owner’s Guide
We install James Hardie-compatible kitchen remodeling built for Los Angeles homes, with kitchen remodeling typically running $16,520 to $53,100 installed. If you’ve found a failed part on your James Hardie-backed assembly, that range covers the corrective work and the material swap, priced in writing before any tool comes out. Most Los Angeles owners notice the problem the same way: a soft spot or stain near a sink run, a cabinet face pulling away from the wall, a backsplash joint that has opened, or exterior trim that reads chalky and cracked where the kitchen meets the yard. One day it’s a small gap. A week later it’s a visible failure you can’t unsee. (844) 343-6681 reaches a live person, day or night, and the estimate is free.
Bradford Remodeling Co Los Angeles is an independent service provider. We are not affiliated with James Hardie, and we install systems that are compatible with James Hardie product lines.
Key Takeaways
- Lead price range: $16,520 to $53,100 for kitchen remodeling in Los Angeles.
- Written price before work starts – always. No numbers that move at the door.
- 365-Day Done Right Promise: if the finished work fails within a full year, we return and correct it at no charge.
- Background-checked, uniformed technicians on every job, with identity and conduct standards set at the Garrison Partners level.
- Live person answers 24/7 at (844) 343-6681.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Which James Hardie Models This Applies To
James Hardie’s kitchen-relevant product lines fall into a few families, and identifying yours matters before anyone quotes you. HardieBacker cement backer board is the direct kitchen workhorse – the wet-area substrate behind tile backsplashes and tile floors. HardiePanel vertical siding, HardiePlank lap siding, and HardieTrim boards show up on the exterior wall or window line where a kitchen addition lives. Three ways to confirm the right part:
- Read the label. HardieBacker boards are usually stamped or labeled on the face or edge with the product name and thickness (commonly 1/4-inch or 1/2-inch).
- Measure the thickness. Backer thickness drives tile height, thresholds, and door clearances. Get this wrong and the tile sits proud of your cabinets.
- Check the exterior profile. Siding color and texture must match the existing run. Photograph the wall section and note where the panel changes.
On the OEM-versus-aftermarket decision: for backer board, a quality cement board that meets the same nominal thickness is functionally equivalent and often the practical choice. For a finished exterior board or a color-matched siding panel, the James Hardie equivalent matters more – the profile and texture are what the eye sees. Compare the manufacturer’s spec sheet to the replacement before you commit.
Signs Your James Hardie Kitchen Remodeling Is Failing
These are the failure signals we see most in Los Angeles. Each one has a cause worth understanding.
- Cracking along a backsplash or tile joint. The substrate has probably absorbed moisture and lost grip, which opens the bond between tile and backer.
- Soft or spongy spots near the sink or dishwasher. A slow leak under the counter has reached the cement board and the framing behind it.
- Cabinet faces pulling away from the wall. Wall planes that were never flattened push the boxes out of square, and hardware carries the strain instead of the fixings.
- Chalky, crusted exterior trim or siding. Sun and dry coastal air break down the finish coat, and the board underneath starts taking on moisture.
- Tile that has “popped” or sounds hollow. A bonded failure – the backer wasn’t fastened or primed to the manufacturer’s instructions, and the adhesive layer let go.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what you’ll actually pay in Los Angeles, installed. These ranges assume we’re correcting the failed part and finishing the assembly so the repair holds.
| Work | Installed Range (Los Angeles) |
|---|---|
| Kitchen remodeling (lead range) | $16,520 – $53,100 |
| Small kitchen remodel | $10,620 – $23,600 |
| Cabinet installation | $4,720 – $15,340 |
| Countertop installation | $2,360 – $7,670 |
| Backsplash installation | $945 – $2,950 |
| Kitchen island installation | $3,540 – $11,800 |
What drives the range: the size of the failed area, whether framing or plumbing has to be opened and rebuilt, how much matching material is needed, and whether tile or cabinetry has to come out and go back in. Parts and labor are itemized – you see the board, the fixings, the finishing coat, and the labor as separate lines. Every job carries the 365-Day Done Right Promise: if the work fails within the full year, we return and fix it at no charge. Background-checked, uniformed technicians on every job. Call (844) 343-6681 for your free estimate.
DIY or Call Us?

There’s a short list of safe, useful checks: look for staining or discoloration under the sink, press gently on suspected soft spots, photograph the labeled face of any hardieboard panel, and note where the exterior trim is cracked. That’s information-gathering – it helps a quote.
Where it goes wrong is the removal and replacement work. Backer board has to be cut, fastened to the manufacturer’s spec, and finished so the next layer bonds; cabinet and countertop work has to be plumb and square or the failure simply repeats six months later. Exterior board has to be installed with the right clearances and flashing or water gets behind it and you’re back to square one. A failed fix on a wet-area or structural element is expensive to unwind, and it’s not a repair a homeowner should attempt without specialized tools and know-how. Our technicians have up to 22 years of experience, and the price is written before work starts. Call (844) 343-6681 for a free estimate.
FAQs
A properly installed backer board or exterior board system typically holds 25 to 40 years or more in Southern California’s climate, but the real stress is local: dry summers and seasonal moisture swing the framing, and any assembly installed without correct fastening or flashing can fail in under 10 years. The lifespan is really about the install quality more than the board itself.
Sometimes. Small hairline cracks or a single popped tile can often be addressed by re-securing and re-finishing the surrounding area. Larger soft spots, widespread hollow tile, or a cabinet face that’s pulling away usually mean the substrate has failed and replacement is the honest route.
A targeted repair – say a backsplash section or an exterior board run – usually runs one to three days. A full kitchen remodel runs several weeks depending on scope. We give you the timeline in writing up front so you can plan around it.
We work from a documented roster of name-brand materials, including James Hardie-compatible products alongside KraftMaid cabinetry, Cambria and Silestone surfaces, Kohler and Moen fixtures, and Therma-Tru doors, so every spec is traceable and warranted by the manufacturer. You’ll see the exact product on your written quote before work starts. Call (844) 343-6681 and we’ll confirm the right match for your assembly – estimates are free.
Get a Written Price for Your Los Angeles Kitchen

If a James Hardie-backed part in your Los Angeles kitchen has failed, we’ll give you a clear, itemized price before anyone touches a tool. The estimate is free, the price doesn’t move, and every finished job carries the 365-Day Done Right Promise. Call (844) 343-6681 – a live person answers around the clock.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












