A Bradford company - serving Los Angeles, CA
A new rear addition with a vaulted beamed ceiling and tall windows
Mighty Buildings · Los Angeles

Mighty Buildings Home Additions & ADU in Los Angeles, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Los Angeles
A single-story rear room addition with tall windows and a new patio
A second-story addition that matches the existing roofline
An open living space after a whole-home remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A remodeled living room with built-in shelves around the fireplace
An open kitchen and dining area after a remodel
A freestanding soaking tub in a remodeled primary bathroom
A whole-home remodel with the living, dining and kitchen areas opened up
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mighty Buildings Home Additions & ADU: The Los Angeles Owner’s Guide

We install and finish Mighty Buildings-compatible home additions and ADUs in Los Angeles, and a typical installed addition runs $53,100 – $153,400 depending on footprint, foundation work, and finishes. This isn’t a same-day part swap – additions are planned work with permits, inspections, and a schedule. Owners usually land here after a failed panel, a leaking transition, or a finish that’s separating from the factory module and they can’t get a straight answer on what’s actually broken.

Call (844) 343-6681

What we hear most in Los Angeles: a 3D-printed panel joint has opened at the weatherline, the factory-applied finish is blistering on a south-facing wall, or the connection between the Mighty Buildings module and the site-built foundation has started to show. Each of those points to a specific failure, and each has a different fix.

Key Takeaways

  • Mighty Buildings modules are factory-built; site-side connection, foundation, and weatherproofing failures are the most common issues we see.
  • Installed addition work in Los Angeles runs $53,100 – $153,400; ADU construction is a separate, larger scope.
  • Bradford Remodeling Co Los Angeles is an independent contractor, not affiliated with Mighty Buildings.
  • We don’t stock parts. We source to your model’s spec and install to a written price.

Which Mighty Buildings Models This Applies To

A finished backyard cottage with a small covered porch

Mighty Buildings has shipped multiple product lines over the years, and the panel geometry, connection details, and factory finish systems are not interchangeable between them. Before anyone quotes you a fix, the model, panel series, and build date have to be confirmed. The label on the electrical panel or the stamped documentation in the permit set is the fastest place to start; if that’s gone, panel dimensions and joint profiles get you there.

The OEM-versus-aftermarket question matters here. Mighty Buildings proprietary connection hardware and factory finish systems are not off-the-shelf. For a joint that’s failed, the honest answer is often a matched or engineered equivalent rather than a factory part – because the original may not be available on a timeline that works. What we will not do is substitute a generic sealant or bracket and call it compatible. Substrate and panel composition drive what bonds and what doesn’t.

If you also have KraftMaid, Cambria, or Silestone in the interior and a finish issue has spread to cabinetry or a countertop edge, that’s a separate scope we handle too.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mighty Buildings Home Additions & ADU Is Failing

These are the symptoms we actually get called about in Los Angeles, and what each one usually means underneath:

  • Water staining at panel joints. The weather seal at the module-to-module or module-to-foundation seam has failed. Once water gets behind the joint, it tracks along the panel face and shows up feet away from the actual entry point.
  • Finish blistering or peeling on exterior walls. Factory finish systems fail first on south and west elevations where UV load is highest. Los Angeles sun exposure is hard on coatings, and once moisture is behind the finish, repainting alone won’t hold.
  • Hairline cracks at the foundation connection. Differential movement between the factory module and the site-built foundation shows up here first. Small cracks are often cosmetic; widening or stair-stepping cracks are not.
  • Gaps opening at wall or ceiling transitions. Thermal movement in the panel system combined with a rigid connection detail. Gap width and whether it’s seasonal tells you a lot.
  • Soft spots or staining at the roof-to-wall junction. Flashing detail at the module roofline. This is the highest-risk leak location on any modular addition.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Footing forms with tied rebar for a home addition

Installed home addition work in Los Angeles runs $53,100 – $153,400. ADU construction is a larger scope, typically $106,200 – $259,600, and garage conversions run $35,400 – $94,400. A targeted repair to a failed joint or finish is a much smaller number and gets its own written price.

What drives the range: footprint and square footage, foundation condition and whether it needs correction, the extent of finish replacement, permit and inspection requirements, and access. What’s included at every tier: a written price before any work starts, permits pulled and inspections passed where required, and a clean site at close.

Every completed project carries the 365-Day Done Right Promise – a full-year written guarantee. If the work fails inside that window, we come back and correct it at no charge. Our technicians have up to 22 years of experience. No numbers move at the door.

DIY or Call Us?

What you can safely do: document the failure. Photograph the joint, note the gap width, check whether it changes between morning and afternoon, and locate the model label. That information shortens the conversation and often tells us the failure type before we ever arrive.

What goes wrong DIY: chasing a joint leak with sealant. Water behind a panel joint has to get out somewhere, and sealing the exit without fixing the entry traps moisture in the assembly – which is what turns a $900 repair into a wall rebuild. Structural fasteners at the foundation connection are load-bearing, and swapping them without engineering is where it goes badly.

Call (844) 343-6681 for a free estimate. A live person answers, day or night.

FAQs

A room opened to the studs with new wiring and plumbing

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled laundry and mudroom with a bench, cubbies and painted cabinetsA built-in window seat in a bay windowA dining nook with a built-in banquetteA home office with a built-in desk and shelvesA remodeled hall bathroom with subway tile and a floating vanityA remodeled primary suite with built-in wardrobes and a window seat

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Los Angeles

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Los Angeles team

A local vetted partner works across Los Angeles and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 343-6681
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Bradford Remodeling Co Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch